5V0-41.20認定の有効な試験問題集解答学習ガイド！（最新の36問題)
5V0-41.20問題集で時間限定！無料アクセスせよ
VMware 5V0-41.20 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
質問 18
Scenario 2:
After completing the branch activation for all required branches, the network administrator attempts to test connectivity between the various branches and between hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the some applications they are accessing.
Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
A technician has added Edges to an East Coast Profile. These Edges are not able to communicate via dynamic tunnels to Edges in the West_Coast profile. The technician has noticed that some Edges are able to establish dynamic tunnels.
What could be preventing Edges from being able to establish dynamic tunnels?
- A. The profiles are not configured to allow dynamic branch to branch VPNs.
- B. The profiles are configured to only allow dynamic branch to branch for Edges within the same profile.
- C. None of the existing profiles have Cloud VPN enabled thus preventing dynamic tunnels.
- D. Neither profile has been configured to utilize cloud gateways.
正解: A
質問 19
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
Users at the London site are complaining of various intermittent issues around websites not loading, or applications being remotely accessed disconnecting sporadically and reconnecting after a few minutes. The network administrator does not see anything strange on the Edge overview page and decides to check if the CPU or memory have been hitting close to 100%.
Where should the administrator verify this information?
- A. In the VCO > Monitor > Alerts
- B. In the VCO > Monitor > Click London_Site01 > Click the System Tab
- C. In the VCO > Test 8c Troubleshoot > Remote Diagnostics > System Status
- D. In the VCO > Remote Troubleshooting > Remote Actions > System Status
正解: B
質問 20
Scenario 2:
After resolving numerous connectivity Issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
A network administrator has configured a Business Policy to send a specific application directly out an underlay interface. Users have complained of slow responses for that application. While troubleshooting, the network administrator finds the traffic is actually taking an overlay path to another SD-WAN Edge.
What is causing this behavior?
- A. The other Edge location is advertising a secure route for the application's subnet.
- B. Internet Backha.
- C. uI has been configured forcing traffic into the underlay towards the hub.
- D. The underlay path is not available forcing traffic into the overlay.
- E. Configuring Business Policy Direct settings have no affect on traffic flows.
正解: C
質問 21
Scenario 2:
After completing the branch activation activities for ail required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certconfigurations have been complete. The administrator also observed that several reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure thatall sites can talk to each other and all resources are accessible.
Exhibit.
A network administrator has been told that Dallas needs some high-availability in the event that the SD-WAINJ Edge goes offline for whatever reason. There is limited budget so the administrator must use the other available CE router as a fallback mechanism. The administrator will use VRRP to provide HA. When configuring VRRP, the SD-WAN Edge service restarted.
What caused this behavior?
- A. This is an expected behavior.
- B. The administrator failed to specify the Edge Type as a VeloCloud Cluster.
- C. The device is faulty and will need a replacement.
- D. The administrator failed to specify the Edge Type as a VeloCloud Active Standby Pair.
正解: A
質問 22
Scenario 1:
A network administrator is tasked with enabling SD-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of lime. The organization has several branch sites. One is an Internet-only site and two are Hybrid locations with both internet and MPLS. The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology.
Exhibit.
When attempting to activate an Edge, after clicking on the "activation link" in the email that was sent to the network administrator, the Edge's local UI shows as "Internet down". This is preventing the Edge from coming online and being activated. When referring to the output, the network administrator notices that the Edge has received DHCP addressing.
What could be preventing the Edge from coming online?
- A. Cloud VPN is not enabled in the AMER Branch profile.
- B. The Edge's profile does not specify the correct Edge Model.
- C. The subnet mask assigned to the Edge is incorrect.
- D. The next hop does not respond to ICMP pings.
正解: B
質問 23
Scenario 3:
After resolving numerous connectivity Issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
The network administrator has been made aware that Chicago is receiving traffic from non-SD-WAN sites, bottlenecking Chicago's interfaces. The network administrator's VMware SE has mentioned using the uplink feature to help resolve this.
What are two ways the uplink feature should be used in this scenario? (Choose two.)
- A. Direct all traffic to that neighbor designated as an uplink,
- B. Prevent the site in question from becoming a transit site.
- C. Set the uplink community to forward traffic to a group of neighbors.
- D. Stop mutual redistribution of routes from underlay and overlay.
正解: A,B
質問 24
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
A network administrator decides to deploy a local Checkpoint VNF appliance on the Edge in London to cut back on unnecessary traffic towards the NY hub location.
The Checkpoint VNF and associated security services were successfully deployed at the London Branch.
Users are now are complaining that Webpages are extremely slow to load, just like before.
What should the administrator do?
- A. Disable and redeploy the VNF with lower memory requirements.
- B. Verify to see if a firewall rule in the Edge is set to allow traffic to the Checkpoint VNF.
- C. Reboot the Edge, as this is a requirement in the deployment of a Security VNF.
- D. Check the flow records in Remote Diagnostics.
正解: A
質問 25
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
A network administrator is investigating connectivity issues between Chicago and San Jose. The administrator browses to the Overlay Flow Control (OFC) window and notices that the screen is blank with no routes shown in the OFC.
What is a possible reason for this?
- A. OSPF or BGP is not enabled.
- B. The routing table on the Edges has not been initialized.
- C. There is an invalid MTU configuration at Chicago.
- D. Cloud VPN for the Edges / Profiles is not enabled.
正解: D
質問 26
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
Several reports have come in from branch locations indicating customers cannot reach applications being served by the hub location. The hub location has a single LAN-side port from which it should be learning dynamic routes for the subnets serving the applications.
How should the technician verify if the ports on the Edge are up and working?
- A. Look in Test&Troubleshoot under the Remote Actions and run System Health.
- B. Look in Test&Troubleshoot under the Remote Diagnostics and run System Health.
- C. Look under Administration and System Settings to verify if the interfaces are configured and enabled.
- D. Look in Test&Troubleshoot under the Remote Diagnostics and run Interface status.
正解: C
質問 27
Scenario 3:
After resolving numerous connectivity Issues throughout the various branch sites, connectivity between applications and users is finally present- The network administrator is informed (hat during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
Which metrics can a network administrator verify in the QoE screen to determine the overall health of Underlay and Overlay?
- A. Jitter, Speed, Latency.
- B. Packet Loss, Latency, Speed.
- C. Jitter Packet Loss, Speed.
- D. Jitter, Packet Loss, Latency.
正解: A
質問 28
Scenario 2:
After completing the branch activation activities for ail required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and blanches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
After deploying the Edge, the security team has determined that traffic from Guest wireless traffic is able to reach resources in the Production network. There should be absolutely no interaction.
How can this be prevented?
- A. Have Guest wireless and Production traffic in the same segment but different VLANs.
- B. Segmentation is currently not supported on VeloCloud Edge.
- C. Create two subnets, one for Guest wireless traffic and another one for Production traffic.
- D. Create an additional segment for Guest wireless traffic and leave the Production traffic in the default global segment.
正解: B
質問 29
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing; internal and external applications.
Exhibit.
A network administrator is configuring several branches to prefer a single prefix, 10.20.11.0/24, from the Seattle hub over the New York hub for various application performance reasons.
What are two effective ways the administrator can accomplish this? (Choose two.)
- A. In the hub preferred order in the profile, set the Seattle hub to be preferred over New York.
- B. Modify the AS Path in New York to be longer for 10.20.11.0/24.
- C. In the OFC 10.20.11.0/24, modify the preferred exit point to be Seattle and pin the route.
- D. Modify the AS Path in New York to be shorter for 10.20.11.0/24.
正解: A,C
質問 30
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
A network administrator has received an email from the applications development team requesting connectivity to their AWS VPC.
The administrator has configured the tunnel via the VMware SD-WAN Gateway. The tunnel status icon has not turned green.
Where are two places the administrator must check? (Choose two.)
- A. Determine if the DH parameter on the Edge has been configured.
- B. Determine if the NVS has been enabled and assigned to a profile.
- C. Determine if the PSK is mismatched between the AWS side and the VeloCloud Edge.
- D. Determine if the PSK is mismatched between the AWS side and the VeloCloud Gateway.
正解: C,D
質問 31
Scenario 3:
After resolving numerous connectivity Issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
Users at a remote office are complaining about poor performance with certain applications. The network administrator has already verified the configuration is correct.
Which two parameters should the administrator review to troubleshoot this issue? (Choose two.)
- A. Look under Monitor, check Business priority tab
- B. Check the underlay network (bandwidth, latency, jitter, packet loss)
- C. Check the flows to verify which Business Policy the traffic of interest is matching
- D. Change the bandwidth measurement under WAN Overlay Advanced Settings
正解: A,B
質問 32
......
VMware 5V0-41.20試験実践テスト問題：https://www.jpntest.com/shiken/5V0-41.20-mondaishu