NSE6_FWF-6.4問題集PDFは最新 [2022年最新] 究極な学習ガイド
NSE6_FWF-6.4試験問題集PDFは更新された問題集でしかも合格保証付き
質問 13
As a network administrator, you are responsible for managing an enterprise secure wireless LAN. The controller is based in the United States, and you have been asked to deploy a number of managed APs in a remote office in Germany.
What is the correct way to ensure that the RF channels and transmission power limits are appropriately configured for the remote APs?
- A. Configure the APs individually by overriding the settings in Managed FortiAPs
- B. Create a new FortiAP profile and change the county code settings on the profile
- C. Configure the controller for the correct country code for Germany
- D. Clone a suitable FortiAP profile and change the county code settings on the profile
正解: D
質問 14
Refer to the exhibits.
Exhibit A
Exhibit B
Exhibit C
A wireless network has been installed in a small office building and is being used by a business to connect its wireless clients. The network is used for multiple purposes, including corporate access, guest access, and connecting point-of-sale and IoT devices.
Users connecting to the guest network located in the reception area are reporting slow performance. The network administrator is reviewing the information shown in the exhibits as part of the ongoing investigation of the problem. They show the profile used for the AP and the controller RF analysis output together with a screenshot of the GUI showing a summary of the AP and its neighboring APs.
To improve performance for the users connecting to the guest network in this area, which configuration change is most likely to improve performance?
- A. Enable frequency handoff on the AP to band steer clients
- B. Install another AP in the reception area to improve available bandwidth
- C. Reduce the number of wireless networks being broadcast by the AP
- D. Increase the transmission power of the AP radios
正解: D
質問 15
Refer to the exhibits.
Exhibit A
Exhibit B
A wireless network has been created to support a group of users in a specific area of a building. The wireless network is configured but users are unable to connect to it. The exhibits show the relevant controller configuration for the APs and the wireless network.
Which two configuration changes will resolve the issue? (Choose two.)
- A. Increase the transmission power of the AP radio interfaces
- B. For both interfaces in the wtp-profile, configure vap-all to be manual
- C. Disable intra-vap-privacy for the Authors vap-wireless network
- D. For both interfaces in the wtp-profile, configure set vaps to be "Authors"
正解: B,C
質問 16
When configuring a wireless network for dynamic VLAN allocation, which three IETF attributes must be supplied by the radius server? (Choose three.)
- A. 65 Tunnel-Medium-Type
- B. 58 Egress-VLAN-Name
- C. 83 Tunnel-Preference
- D. 64 Tunnel-Type
- E. 81 Tunnel-Private-Group-ID
正解: A,D,E
解説:
The RADIUS user attributes used for the VLAN ID assignment are:
IETF 64 (Tunnel Type)-Set this to VLAN.
IETF 65 (Tunnel Medium Type)-Set this to 802
IETF 81 (Tunnel Private Group ID)-Set this to VLAN ID.
質問 17
How are wireless clients assigned to a dynamic VLAN configured for hash mode?
- A. Using the current number of wireless clients connected to the SSID and the number of clients allocated to each of the VLANs
- B. Using the current number of wireless clients connected to the SSID and the number of IPs available in the least busy VLAN
- C. Using the current number of wireless clients connected to the SSID and the group the FortiAP is a member of
- D. Using the current number of wireless clients connected to the SSID and the number of VLANs available in the pool
正解: D
解説:
VLAN from the VLAN pool based on a hash of the current number of SSID clients and the number of entries in the VLAN pool.
質問 18
What type of design model does FortiPlanner use in wireless design project?
- A. Analytical model
- B. Integration model
- C. Predictive model
- D. Architectural model
正解: D
解説:
FortiPlanner will look familiar to anyone who has used architectural or home design software.
質問 19
What is the first discovery method used by FortiAP to locate the FortiGate wireless controller in the default configuration?
- A. Multicast
- B. Broadcast
- C. DHCP
- D. Static
正解: C
質問 20
Which statement describes FortiPresence location map functionality?
- A. Provides real-time insight into user usage stats
- B. Provides real-time insight into user purchase activity
- C. Provides real-time insight into user movements
- D. Provides real-time insight into user online activity
正解: A
解説:
This geographical data analysis provides real-time insights into user behavior.
質問 21
When deploying a wireless network that is authenticated using EAP PEAP, which two configurations are required? (Choose two.)
- A. An X.509 certificate to authenticate the client
- B. A WPA2 or WPA3 Enterprise wireless network
- C. A WPA2 or WPA3 personal wireless network
- D. An X.509 to authenticate the authentication server
- E. 509 certificates and work for connections that use Secure Socket Layer/Transport Level Security (SSL/TLS). Both client and server certificates have additional requirements.
正解: A,D
質問 22
When using FortiPresence as a captive portal, which two types of public authentication services can be used to access guest Wi-Fi? (Choose two.)
- A. Hardware security token authentication
- B. Software security token authentication
- C. Short message service authentication
- D. Social networks authentication
正解: A,D
解説:
This information along with the social network authentication logins with Facebook, Google, Instagram, LinkedIn, or FortiPresence using your WiFi.
Captive Portal configurations for social media logins and internet access. You can add and manage sites using the integrated Google maps and manoeuvre your hardware infrastructure easily.
質問 23
As standard best practice, which configuration should be performed before configuring FortiAPs using a FortiGate wireless controller?
- A. Create a custom AP profile
- B. Preauthorize APs
- C. Set the wireless controller country setting
- D. Create wireless LAN specific policies
正解: A
質問 24
Which factor is the best indicator of wireless client connection quality?
- A. Upstream link rate, the connection rate for the client to the AP
- B. Downstream link rate, the connection rate for the AP to the client
- C. The channel utilization of the channel the client is using
- D. The receive signal strength (RSS) of the client at the AP
正解: D
解説:
SSI, or "Received Signal Strength Indicator," is a measurement of how well your device can hear a signal from an access point or router. It's a value that is useful for determining if you have enough signal to get a good wireless connection.
質問 25
......
あなたを合格させるFortinet試験にはNSE6_FWF-6.4試験問題集：https://www.jpntest.com/shiken/NSE6_FWF-6.4-mondaishu