1Y0-440 無料問題集「Citrix Architecting a Citrix Networking Solution」
Scenario: A Citrix Architect has deployed an authentication setup with a ShareFile load-balancing virtual server. The NetScaler is configured as the Service Provider and Portalguard server is utilized as the SAML Identity Provider. While performing the functional testing, the architect finds that after the users enter their credentials on the logon page provided by Portalguard, they get redirected back to the Netscaler Gateway page at uri /cgi/samlauth/ and receive the following error.
The events in the /var/log/ns.log at the time of this issue are as follows:
What should the architect change in the SAML action to resolve this issue?
The events in the /var/log/ns.log at the time of this issue are as follows:
What should the architect change in the SAML action to resolve this issue?
正解：D
解答を投票する
Scenario: A Citrix Architect needs to deploy a Citrix ADC appliance for Workspacelab, which will provide application load balancing services to Partnerlab and Vendorlab.
The setup requirements are as follows:
A pair of Citrix ADC MPX appliances will be deployed in the DMZ network.
High availability will be accessible on the Citrix ADC MPX in the DMZ Network.
Load balancing should be performed for the mail servers for Partnerlab and Vendorlab.
The traffic for both of the organizations must be isolated.
Separate Management accounts must be available for each client.
The load-balancing IP addresses must be identical.
A separate VLAN must be utilized for communication for each client.
Which solution can the architect utilize to meet the requirements?
The setup requirements are as follows:
A pair of Citrix ADC MPX appliances will be deployed in the DMZ network.
High availability will be accessible on the Citrix ADC MPX in the DMZ Network.
Load balancing should be performed for the mail servers for Partnerlab and Vendorlab.
The traffic for both of the organizations must be isolated.
Separate Management accounts must be available for each client.
The load-balancing IP addresses must be identical.
A separate VLAN must be utilized for communication for each client.
Which solution can the architect utilize to meet the requirements?
正解：B
解答を投票する
Scenario: A Citrix Architect needs to design a new multi-datacenter NetScaler deployment. The customer wants NetScaler to provide access to various backend resources by using Global Server Load Balancing (GSLB) in an Active-Active deployment.
Click the Exhibit button to view additional requirements identified by the architect.
Which GSLB algorithm or method should the architect use for the deployment, based on the stated requirements?
Click the Exhibit button to view additional requirements identified by the architect.
Which GSLB algorithm or method should the architect use for the deployment, based on the stated requirements?
正解：E
解答を投票する
Scenario: A Citrix Architect holds a design discussion with a team of Workspacelab members, and they capture the following requirements for the Citrix ADC design project:
A pair of Citrlx ADC MPX appliances will be deployed in the DMZ network and another pair in the internal network.
High availability will be accessible between the pair of Citrix ADC MPX appliances in the DMZ network.
Multi-factor authentication must be configured for the Citrix Gateway virtual server.
The Citrix Gateway virtual server is integrated with the StoreFront server.
Load balancing must be configured for the StoreFront server. *Authentication must be deployed for users from the workspacelab.com domain.
The Workspacelab users should be authenticated using Cert Policy and LDAP.
All the client certificates must be SHA 256-signed, 2048 bits, and have UserPrincipalName as the subject.
Single Sign-on must be performed between StoreFront and Citrix Gateway. After deployment the architect observes that LDAP authentication is failing.
Click the Exhibit button to review the output of aaad.debug and the configuration of the authentication policy.
What is causing this issue?
A pair of Citrlx ADC MPX appliances will be deployed in the DMZ network and another pair in the internal network.
High availability will be accessible between the pair of Citrix ADC MPX appliances in the DMZ network.
Multi-factor authentication must be configured for the Citrix Gateway virtual server.
The Citrix Gateway virtual server is integrated with the StoreFront server.
Load balancing must be configured for the StoreFront server. *Authentication must be deployed for users from the workspacelab.com domain.
The Workspacelab users should be authenticated using Cert Policy and LDAP.
All the client certificates must be SHA 256-signed, 2048 bits, and have UserPrincipalName as the subject.
Single Sign-on must be performed between StoreFront and Citrix Gateway. After deployment the architect observes that LDAP authentication is failing.
Click the Exhibit button to review the output of aaad.debug and the configuration of the authentication policy.
What is causing this issue?
正解：C
解答を投票する
Scenario: A Citrix Architect and a team of Workspacelab members met to discuss a Citrix ADC design project. They captured the following requirements from this design discussion:
All three (3) Workspacelab sites (DC. NDR. and DR) will have similar Citrix ADC configurations and design.
The external Citrix ADC MPX appliances will have Global Server Load Balancing (GSLB) configured and deployed in Active/Active mode ADNS service should be configured on the Citrix ADC to make it authoritative for domain nsg Workspacelab.com.
In GSLB deployment, the DNS resolution should be performed to connect the user to the site with least network latency.
On the internal Citrix ADC, load balancing for StoreFront services, Citrix XML services, and Citrix Director services must be configured On the external Citrix ADC. the Gateway virtual server must be configured in ICA proxy mode Click the Exhibit button to view the logical representation of the network and the firewall policy prerequisites provided by the architect. On which two firewalls should the architect configure the policies? (Choose two.)
All three (3) Workspacelab sites (DC. NDR. and DR) will have similar Citrix ADC configurations and design.
The external Citrix ADC MPX appliances will have Global Server Load Balancing (GSLB) configured and deployed in Active/Active mode ADNS service should be configured on the Citrix ADC to make it authoritative for domain nsg Workspacelab.com.
In GSLB deployment, the DNS resolution should be performed to connect the user to the site with least network latency.
On the internal Citrix ADC, load balancing for StoreFront services, Citrix XML services, and Citrix Director services must be configured On the external Citrix ADC. the Gateway virtual server must be configured in ICA proxy mode Click the Exhibit button to view the logical representation of the network and the firewall policy prerequisites provided by the architect. On which two firewalls should the architect configure the policies? (Choose two.)
正解：B、D
解答を投票する
Scenario: A Citrix Architect needs to deploy Single Sign-on form-based authentication through Citrix ADC for Outlook Web Access (OWA) 2013 for the users of the domain workspacelab com The Single Sign-on (SSO) must be performed based on sAMAccountName.
Which SSO action can the architect use to meet this requirement?
Which SSO action can the architect use to meet this requirement?
正解：C
解答を投票する
解説: (JPNTest メンバーにのみ表示されます)
Scenario: A Citrix Architect has deployed Citrix Gateway integration with the StoreFront server. The Vasco server is used to perform WebAUTH to authenticate users The configuration snippet is as follows:
Which parameter is utilized to calculate the content-length insert in the request sent to the server?
Which parameter is utilized to calculate the content-length insert in the request sent to the server?
正解：A
解答を投票する
Scenario: The Workspacelab team has configured their Citrix ADC Management and Analytics (Citrix Application Delivery Management) environment. A Citrix Architect needs to log on to the Citrix Application Delivery Management to check the settings.
Which two authentication methods are supported to meet this requirement? (Choose two.)
Which two authentication methods are supported to meet this requirement? (Choose two.)
正解：C、D
解答を投票する
Scenario: A Citrix Architect needs to deploy three VPX instances on NetScaler SDX 11500 device to meet the following design requirements:
Three (3) VPX instances must be provisioned on the SDX device.
Instance 1 must be utilized for deploying NetScaler Gateway virtual server.
Instance 2 must be utilized for deploying load balancing virtual servers for XML, Director, StoreFront, and Active Directory servers.
Separate IP address must be utilized for the communication with XenApp environment and LDAP communication.
Instance 3 must be used for deploying the test environment.
In the test environment, NetScaler Gateway virtual server, load balancing virtual servers for XML, Director, StoreFront and Active Directory servers must be configured.
How many IP addresses will be required to meet these design requirements?
Three (3) VPX instances must be provisioned on the SDX device.
Instance 1 must be utilized for deploying NetScaler Gateway virtual server.
Instance 2 must be utilized for deploying load balancing virtual servers for XML, Director, StoreFront, and Active Directory servers.
Separate IP address must be utilized for the communication with XenApp environment and LDAP communication.
Instance 3 must be used for deploying the test environment.
In the test environment, NetScaler Gateway virtual server, load balancing virtual servers for XML, Director, StoreFront and Active Directory servers must be configured.
How many IP addresses will be required to meet these design requirements?
正解：D
解答を投票する