210-030無料問題集「VCE Vblock Systems Deployment and Implementation

質問 1

Your client informs you that they can no longer connect to the MDS using SSH. You are asked to
troubleshoot this problem.
Which type of cable is needed to perform this task?

（A）fiber SC-SC

（B）optical

（C）serial rollover

（D）CAT 6 UTP

正解：C 解答を投票する

質問 2

A customer requests that disks be added to its Vblock System 720. The disks were added to a physical
disk group and then data devices were created. The customer mentions that they do not see the new
capacity.
What should you do to resolve this problem?

（A）Add the devices to the masking group.

（B）Map the devices to the front end ports.

（C）Add the devices to the FAST VP policy.

（D）Add the devices to the thin pool and enable them.

正解：D 解答を投票する

質問 3

You are setting up a FAST VP policy in a Vblock System 700. The pool space for each tier is 5 TB EFD,
1 0 TB FC, and 100 TB SAT
The storage group with the FAST policy applied has a total of 10 TB allocated. The FAST policy has a
setting of 10% EFD, 50% FC, and 100% SATA.
According to the FAST policy, how much EFD space is available for use?

（A）1 TB

（B）0.5 TB

（C）11.5 TB

（D）5 TB

正解：A 解答を投票する

質問 4

What is the microcode used to manage and control a VNX storage array in a Vblock System 340?

（A）CLARiiON

（B）Flare

（C）DART

（D）Enginuity

正解：A 解答を投票する

質問 5

When planning a power shutdown on the VNX5300 Unified storage array, how would you verify the
successful power down of each DME?

（A）On the rear of a DME, the amber fault LED is lit on the latch handle of each DME management module.

（B）On the rear of a DME, the green fault LED is lit on the latch handle of each DME management module.

（C）On the front of a DME, the amber fault LED is not lit on the latch handle of each DME management
module.

（D）On the front of a DME, the enclosure amber fault LED is not lit and the enclosure power LED is lit.

正解：A 解答を投票する

質問 6

You have configured zoning of a new cluster with four hosts on a Vblock System 340.
According to the VCE Logical Build Guide, what is the minimum number of zones per host that you should
see on each MDS?

（A）3

（B）4

（C）2

（D）6

正解：C 解答を投票する

質問 7

According to the VCE Logical Build Guide, when configuring a pool in a Vblock System 340 with three
tiers, what should be the initial drive distribution?

（A）5 percent EFD / 35 percent SAS / 60 percent NL SAS

（B）10 percent EFD / 35 percent SAS / 55 percent NL SAS

（C）15 percent EFD / 25 percent SAS / 60 percent NL SAS

（D）5 percent EFD / 45 percent SAS / 50 percent NL SAS

正解：D 解答を投票する

質問 8

During a Vblock System 340 upgrade, the customer upgraded an ESXi server with their own 5.5 ISO and
now the system is only using one active path.
What caused the problem?

（A）The boot LUN is owned by Storage Processor B.

（B）The device must be re-added to the storage group.

（C）Zoning is not properly configured.

（D）PowerPath is not installed on the ESXi 5.5 ISO.

正解：D 解答を投票する

質問 9

Which Vblock Systems management application is used to create Service Profiles, vHBAs, and associate
profiles during the provisioning phase?

（A）DCNM

（B）VCE Vision

（C）ESRS

（D）UIM/P

正解：D 解答を投票する

質問 10

During an on-site RCM upgrade of a Vblock System 340, you encounter problems and are asked to
provide proof of the installed code versions in use on the storage array and MDS switches to the VCE
support team.
What are two methods for collecting this information? (Choose two.)

（A）manual collection

（B）SP collects

（C）VMware support bundle

（D）VCE Vision Intelligent Operations

正解：A、D 解答を投票する

210-030 無料問題集「VCE Vblock Systems Deployment and Implementation - Storage」

弊社を連絡する

関連リンク

トップ試験