301a無料問題集「F5 BIG-IP LTM Specialist: Architect Set-Up & Deploy」

質問 1

An ITM Specialist has the configuration shown:

The LTM Specialist needs to create a new virtual server in part B.
Which virtual address(es) should be used for the new virtual server?

（A）10.90.0.1 and 10.12.0.1

（B）10.120.0.1 only

（C）10.100.0.1 and.10.120.0.1

（D）10.90.0.1 and 10.100.0.1

正解：C 解答を投票する

質問 2

An LTM device is configure with the wildcard virtual servers displayed below.
A client connection is made to 172.24.31.14:443.

（A）VS_172_24_WILDCARD

（B）VS_HTTPS_WILDCARD

（C）VS_HTTP_WILDCARD

（D）VS_172_24_1_WILDCARD

正解：A 解答を投票する

解説: (JPNTest メンバーにのみ表示されます)

質問 3

Refer to the exhibit.

Given the bigip conf extract shown where the servers only talk http on port 80, which node will receive the next user request?

（A）10.1.1.1

（B）10.1.1.2 0

（C）72.10.1.1

（D）10.1.1.3

正解：D 解答を投票する

質問 4

Four members in a server pool have similar hardware platforms. An LTM Specialist needs the load balancing method that can select the server with the fewest entries in the persistence table.
Which load balancing method should the LTM Specialist use?

（A）Dynamic Ratio

（B）Observed

（C）Leas Connections

（D）Least Sessions

正解：D 解答を投票する

解説: (JPNTest メンバーにのみ表示されます)

質問 5

While working with a web developer, it is determined that additional logic is required to assess the pool member availability.
Which two monitor types should be used in this scenario? (Choose two)

（A）External

（B）Gateway ICMP

（C）Scripted

（D）TCP

（E）TCP Echo

正解：A、C 解答を投票する

質問 6

A traffic group becomes active on both devices simultaneously.
What is the most likely root cause?

（A）Incorrect mirroring configuration

（B）Unicast peer unreachable

（C）Incompatible device trust domains

（D）Failover multicast disable

正解：B 解答を投票する

質問 7

To improve application security, an LTM Specialist must configure a BIG application access.
The BIG IP system to authenticate the client certificate before permitting application access.
The BIG-IP system must also support the ability to red to redirect users to a certificate enrolment system without generating a browser error.
Within the Client SSL profile, which value should the LTM Specialist select for the Client Certificate option?

（A）Demand

（B）Request

（C）Require

（D）ignore

正解：C 解答を投票する

質問 8

What should the LT'M Specialist add to the virtual server?

（A）one Stream profile and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)

（B）one Stream profile with the expression of @http:// @https:// @

（C）two Stream profiles and an iRule with the command of STREAM expression (@http:// @https://
@@internalapp@publicapp@)

（D）Two Stream profiles, one profile for each rewrite requirement

正解：A 解答を投票する

質問 9

RADIUS authentication has been configured on the LTM device. The default remote user access requirements are as shown:
- Read only access to the configuration Utility
- Access to TMOS shell
Which two items need to be configured in this situation? (Choose two)

（A）Default remote user role is Manager

（B）Default remote user role is Guest

（C）In Console access is TMSH

（D）Default remote user role is Operator

（E）Console access is Advanced Shell

（F）Console access is Read Only

正解：C 解答を投票する

質問 10

An application is sensitive to packet loss and unexpected session termination.
A pair of LTM devices is configured in an Active/Standby high availability configuration.
SNATS are NOT used and the virtual server contains a Universal Persistence profile.
Which two actions must an LTM Specialist take to ensure the sessions are maintained between the client and server during an LTM device failover event while maintaining maximum uptime?
(Choose two.)

（A）enable Mirroring for a virtual server and persistence profile

（B）enable Clone Pools for a virtual server and a persistence profile

（C）configure a OneConnect profile to mirror connections

（D）configure a serial failover cable for mirror traffic

（E）configure a VLAN and primary mirroring address for mirror traffic

正解：A、E 解答を投票する

質問 11

Two BIG-IP devices configured for HA are failing over frequently.
Logs show failover messages but no network issues. What is the first action?

（A）Run tmsh reset-failover-counter

（B）Configure gateway failsafe

（C）Verify unicast failover addresses and ports

（D）Change failover method to multicast

正解：C 解答を投票する

301a 無料問題集「F5 BIG-IP LTM Specialist: Architect Set-Up & Deploy」

弊社を連絡する

関連リンク

トップ試験