4A0-115 無料問題集「Nokia Ethernet Virtual Private Network Services」

（A）This route indicates that the EVPN service is configured on PEI with a service MTU of 1514.

（B）This route is an A-D per EVPN instance (A-D per EVI) route advertised by PEI for a VPWS.

（C）This route indicates that the EVPN service is configured on PEI with an EVPN instance (EVI) of 113.

（D）This route indicates that the EVPN service configured on PEI is multi-homed.

（A）Configure a local attachment circuit (AC) and a remote AC for VPWS 4 on all PE routers.

（B）Configure an MP-BGP session that allows the exchange of EVPN routes between PEI and PE3.

（C）Configure an MP-BGP session that allows the exchange of IPv4 labeled routes between PE3 and PE4.

（D）Configure a service distribution point (SDP) on PE3 to reach PE4, and another SDP on PE4 to reach PE3.

（A）The egress PE does not perform any Layer-3 route look up to forward traffic.

（B）All VPLS instances must be configured on all PES regardless of whether they have a local host or not.

（C）EVPN IP-Prefix routes are used to populate the VPRN VRF tables.

（D）The ingress PE performs both Layer-2 and Layer-3 look ups when forwarding traffic between subnets.

（A）This service enables the use of EVPN to provide connectivity between hosts in different subnets.

（B）This service requires the use of EVPN-MPLS for data plane.

（C）In this service, the IRB interface acts as a default gateway for hosts in the corresponding subnet.

（D）This service consists of a VPRN and multiple VPLSs.