642-998 無料問題集「Cisco Designing Cisco Data Center Unified Computing」

（A）48-bit dotted hex

（B）128-bit dotted hex

（C）32-bit dotted hex

（D）160-bit dotted hex

（E）64-bit dotted hex

（A）NetFlow does not use flows to provide statistics for accounting.

（B）NetFlow does not use flows to provide statistics for network monitoring.

（C）NetFlow identifies packet flows for both ingress and egress IP packets and provides statistics based on these packet flows.

（D）NetFlow requires changes to the packet and provides statistics based on these packet flows.

（A）A vNIC can communicate with only one Layer 2 domain.

（B）A VLAN can overlap across Layer 2 domains.

（C）Servers can use any virtual interface card.

（D）A Cisco UCS Fabric Interconnect must be configured in switching mode.

（A）Cisco Nexus 3000 Series

（B）Cisco Nexus 5500 Series

（C）Cisco Nexus 7000 Series

（D）Cisco Nexus 4000 Series

（E）Cisco Nexus 2000 Series

（A）iSCSI over 10 Gbps Ethernet

（B）10 Gbps Ethernet

（C）100 Gbps Ethernet

（D）Native Fibre Channel

（E）100 Mbps Ethernet

（F）FCoE on 10 Gbps Ethernet

（A）Cisco UCS 6248UP

（B）Cisco Nexus 2232PP

（C）Cisco Nexus 3548

（D）Cisco UCS 2208XP

（E）Cisco UCS 6296UP

（A）SuSE

（B）Nokia

（C）Citrix

（D）Ubuntu

（E）Mageia

（F）Oracle

（G）Apple

（H）Mandriva

（A）export format

（B）export destination IP address

（C）TCP port number

（D）match interface output

（E）match interface input

（A）SFTP

（B）HTTPS

（C）NFS

（D）CIFS

（E）HTTP

（F）SCP

（G）Fibre Channel

（A）loop

（B）broadcast

（C）cost

（D）congestion

（A）configured as an uplink port, then as an FCoE uplink port

（B）configured as an uplink port, then as an FC uplink port

（C）configured as an FCoE uplink port

（D）configured as an FCoE storage port

（E）configured as an FC uplink port, then as an uplink port

（A）server virtualization

（B）orchestration and automation

（C）network virtualization

（D）routing table virtualization

（E）a converged network infrastructure

（A）Utilize all links between the Cisco Fabric Interconnect and IO Module.

（B）Configure a NIC team, and use per VM load balancing in vCenter.

（C）Use the VIC 1280 in combination with the 2208XP IO Module.

（D）Configure the vNIC for an MTU of 9000.

（E）Ensure all links between the Cisco Fabric Interconnect and IO Module are configured as a port channel.