E20-690無料問題集「EMC VNX Solutions Specialist Exam for Platform Engineers」

質問 1

Refer to the exhibit.

What is the status of the VNX in Unisphere?

（A）Storage system is unmanaged

（B）Component and all of its components are working normally

（C）Storage system is inaccessible

（D）Storage system is unsupported

正解：A 解答を投票する

質問 2

You want to verify that a storage array is configured as a Unified, File or Block. Where can the storage type be determined?

（A）Dashboard window in Unisphere

（B）Login screen of Unisphere

（C）Certificate screen in Unisphere

（D）Title bar of the browser after logging into Unisphere

正解：A 解答を投票する

質問 3

You have been tasked to run a test of dual Control Station high-availability.
Which command would you run from the primary Control Station?

（A）server_standby server_3 -a mover

（B）cs_standby -takeover

（C）cs_standby -failover

（D）server_standby server_2 -a mover

正解：C 解答を投票する

質問 4

You are installing ESRS IP client to monitor a VNX5700 File system.
Your customer has asked you to monitor an additional array. Which other array is supported during installation?

（A）VNX Block

（B）VPLEX

（C）VMAX

（D）VBLOCK

正解：A 解答を投票する

質問 5

A customer has a Unified VNX field installed in their rack. All documentation materials included in the original shipment are stored in the rack. Which item from the original package can be used to verify and label cabling prior to an FRU replacement procedure?

（A）The packing list

（B）The unpacking instructions

（C）The Resource CD

（D）The Installation Guide

正解：D 解答を投票する

質問 6

On VNX Unified series X-blade, which is the correct cabling configuration for the 4-port 8 Gb FC I/O module in slot 0?

（A）Four ports for NDMP tape backup.

（B）Two ports for tape backup and two for SP A and SP B back-end connectivity.

（C）Two ports for tape backup and two for external SAN replication.

（D）All four ports connected to SP A and SP B for high availablity.

正解：B 解答を投票する

質問 7

Which Control Station commands can obtain more detailed information for umount?

（A）man umount umount --help server_info umount what is umount

（B）man umount umount /? info umount what is umount

（C）man umount umount --help info umount what is umount

（D）man umount umount --help info umount print umount

正解：C 解答を投票する

質問 8

Which statement applies to the VNX w/MCx (VG10 and VG50) Gateway configuration?

（A）VNX w/MCx Gateway can only use Symmetrix VMAX, VNX Block, and/or CLARiiON for the storage subsystem

（B）Storage subsystem cannot be used to provide storage to other hosts

（C）VNX w/MCx Gateway must be attached to the storage array through a SAN

（D）VNX w/MCx Gateway can use Symmetrix VMAX only

正解：D 解答を投票する

質問 9

Your customer contacts you about an illuminated hardware 'fault' LED on a VNX LCC component.
Using ESRS, you access the system with Unisphere and determine that the faulted LCC component needs to be replaced.
How would you obtain the LCC part number for ordering a new replacement part?

（A）Launch Unisphere Service Manager and perform a system verification operation.

（B）Use the SolVe Desktop tool and view the specific VNX model parts guide.

（C）Access the Alerts section in Unisphere and locate the specific alert for the faulted LCC.

（D）Access the Hardware for File section of Unisphere and locate the faulted LCC.

正解：B 解答を投票する

質問 10

In a VNX File procedure, which component is imaged back to a state where the VNX Installation Assistant can be rerun?

（A）Control LUNs

（B）Control Station

（C）NAS partitions

（D）Data Movers

正解：B 解答を投票する

質問 11

How can users search for hardware issues on a VNX for File storage system using EMC Unisphere?

（A）Once logged in to Unisphere, navigate to the dashboard section and select System > Storage Hardware for File

（B）Once logged in to Unisphere, use the drop-down list to select System > Storage Hardware for Block

（C）Once logged in to Unisphere, use the drop-down list to select System > Storage Hardware for File

（D）Once logged in to Unisphere, navigate to the dashboard section and select System > Storage Hardware for Block

正解：C 解答を投票する

質問 12

When using USM to download software updates, what is the default location where the software is stored?

（A）C:\Program Files\EMC\repository\Downloads

（B）C:\EMC\repository\VNX\Downloads

（C）C:\EMC\Downloads\VNX

（D）C:\EMC\repository\Downloads\VNX

正解：D 解答を投票する

質問 13

When performing an installation recovery of VNX OE File to pre-VIA initialization state what impact should be considered?

（A）File systems are preserved but the Control Station and Data Movers must be reconfigured.

（B）Reboot the primary DM to force a configuration backup to the standby DM prior to the cleanup.

（C）The back-end cleanup process destroys all file systems and back-end storage.

（D）File systems are preserved but exports and share configuration must be restored.

正解：C 解答を投票する

質問 14

Which account allows root access and cannot be disabled or deleted?

（A）nasadmin global account

（B）nasadmin

（C）sysadmin local account

（D）sysadmin

正解：B 解答を投票する

質問 15

Refer to the exhibit.

A Platform Engineer wants to set up a RemotelyAnywhere session to one of the SPs. When logging on, which option (not visible in the screenshot) allows users to directly access the SP?

（A）Domain Security

（B）Remote Control

（C）Monitor Block Performance

（D）Download SPcollects

正解：B 解答を投票する

E20-690 無料問題集「EMC VNX Solutions Specialist Exam for Platform Engineers」

弊社を連絡する

関連リンク

トップ試験