H31-341-ENU 無料問題集「Huawei HCIP-Transmission V2.0」

（A）Fiber connection only on the NE side.

（B）Fiber connection that does not exist on the network management side and the NE side.

（C）The fiber connection exists on both the network management side and the network element side.

（D）Fiber connection exists only on the local network management side.

（A）SDH Analyzer

（B）Optical power meter

（C）Spectrum Analyzer

（D）MCA8

（A）FALSE

（B）TRUE

（A）FALSE

（B）TRUE

（A）<20dB

（B）<25dB

（C）>20dB

（D）>25dB

（A）In order to maintain the personal safety of personnel

（B）In order to protect the cable

（C）In order to extend the life of the laser of the board

（D）To avoid nonlinear effects

（A）Download the original configuration data

（B）Ensure that the version of the host software is the same before and after the replacement.

（C）Consistency check of network management and network element data.

（D）Query the alarm of the board and confirm that the original alarm has been cleared.

（A）The power module of the board is heavily dusty, affecting heat dissipation, and needs to be removed.

（B）The dust inside the fan is serious, which affects the speed. You need to remove the fan to remove it.

（C）The optical module has an abnormal cooling function and needs to be replaced with a light board.

（D）The dust filter is heavily dusty and affects ventilation. The dust filter needs to be cleaned.

（A）External first, then transfer

（B）Network first, then network element

（C）Low speed first, then high speed

（D）Advanced first, then low level

（A）For the cross-connections, after a path search, either a discrete service or forming a path with other cross-connections, which is impossible to be a discrete service, and forming a path with other cross-connections.

（B）A service is searched for a discrete service, indicating that the service is not working properly on the NE side.

（C）Perform path search on the U2000 network management. Cross-connections that do not form a path are called high-bandwidth services.

（D）Discrete service management requires the U2000 license to have path management functions.

（A）RDU9

（B）WSD9

（C）WSMD9

（D）WSM9

（A）When the extended SSM protocol is started, the clock network can be configured in both directions and can be looped.

（B）Whether to start the SSM protocol has little effect on the clock network.

（C）When the standard SSM protocol is started, the clock network can be configured in both directions but cannot be looped.

（D）When the SSM protocol is not enabled, the clock network can only be configured as one-way and cannot be looped.

（A）64 kbit/s

（B）576 kbit/s

（C）192 kbit/s

（D）2 Mbit/s

（A）Single station hardware check is complete, make sure all power switches are in the off position

（B）It is strictly forbidden to plug and unplug the power plug and PIU board.

（C）If the input voltage of the equipment is not within the required range, suggestions for rectification should be proposed.

（D）In case of power failure, the contact board can be used without anti-static wrist or anti-static gloves.

（A）Network performance test

（B）Network equipment performance verification test

（C）Custom test

（A）SDH

（B）OTN

（C）PDH

（D）Grouping

（A）FEC mode does not match at both ends of the transceiver

（B）There is no complete OCh path

（C）Physical connection lacking between boards

（D）The channel has been used up