HPE0-J58無料問題集「HP Designing Multi-Site HPE Storage Solutions」

質問 1

An HPE Nimble customer needs to consolidate storage and scale performance. They are looking to purchase additional hardware to meet these requirements.
What is the best solution to offer this customer?

（A）Use multiple single-array storage pools

（B）Add additional HBAs in the arrays

（C）Add additional SSDs to the cache

（D）Use multi-array storage pools

正解：D 解答を投票する

質問 2

A customer wants to take advantage of ISL aggregation within a Brocade switch configuration. The customer has added the necessary licenses to allow the forming of trunks in the configuration. You have already provided the standard SAN design guidelines.
Which additional recommendation should you suggest to the customer?

（A）Add paths to trunks, so the paths that are longer will cause traffic to be rerouted.

（B）Place the trunking-capable switches at the edge of the fabric

（C）Place the non-trunking switches at the core of the fabric.

（D）Use redundant trunk groups in redundant fabrics to increase availability

正解：D 解答を投票する

質問 3

A customer needs to replicate the data on their HPE 3PAR arrays between their datacenters. Their
datacenters are 250km apart. The link between the sites has an RTO of 100 ms, and they have an RPO of 3
minutes.
Which replication method should you recommend to meet the customer needs?

（A）RCFC in Asynchronous Periodic Mode

（B）RCFC is Synchronous mode

（C）RCIP in Asynchronous Streaming mode

（D）RCIP is Synchronous mode

正解：D 解答を投票する

質問 4

You are designing a multi-site replication solution using HPE 3PAR storage array. Which key factor should drive you to choose FCIP over an ROP based solution?

（A）network latency exceeds 100 ms

（B）no host latency impact when using periodic asynchronous replication

（C）amount of data to replicate is low

（D）amount of data to replicate is high

正解：C 解答を投票する

質問 5

A customer has two sites within a short distance. They require a primary storage solution which supports
automatic failover for their block storage, SMB shares, and NFS home directories. Which HPE solution best fits
the customer's requirements?

（A）HPE StoreOnce

（B）HPE Nimble

（C）HPE 3PAR

（D）HPE Simplivity

正解：C 解答を投票する

質問 6

A customer is monitoring an existing HPE 3PAR array, which is doing synchronous replication to a remote site. The customer notices that controller utilization regularly exceeds 60% on all nodes. An HPE 3AR OS upgrade to 3.3.1 MU2 is planned in the near future to support compression on the array.
What should you inform the customer before performing the upgrade?

（A）Enabling compression requires a backup and restore of all data

（B）Enabling compression requires SED capable SSDs In the array.

（C）Performing the upgrade will need to be done in the offline mode

（D）Performance cannot he guaranteed during the upgrade.

正解：D 解答を投票する

質問 7

Refer to the exhibit.

A customer is considering a new HPE 3PAR for the purpose of implementing deduplication and compression. Based on the output returned from the NinjaCrawler tool, what do you know about the customer data?

（A）This data has a video data workload profile

（B）This data has a block size which is not optimal for HPE 3PAR

（C）This data is from an HP-UX system

（D）This data is a good candidate for HPE 3PAR deduplication

正解：D 解答を投票する

質問 8

A customer owns a Storeonce 6500 and wants to use HPE StoreOnce Cloud Bank Storage.
What is the lowest cost Implementation for CloudBank?

（A）a RAM expansion on the existing StoreOnce 6500

（B）StoreOnce VSA running firmware 3.18 onwards

（C）StoreOnce 3100

（D）StoreOnce 6500

正解：B 解答を投票する

質問 9

You receive an error when attempting to utilize SAF Analyze to upload customer data that you have collected
to develop reports for a new proposal. What must you do first to begin the process?

（A）Create a new opportunity

（B）Export the data as .xml

（C）Create a gatekeeper on your SAF utility server

（D）Create a single .zip file of all data exports

正解：D 解答を投票する

質問 10

You are developing reports for a new proposal. You try to use SAF Analyze to upload the customer data you collected, but you receive an error.
What must you do first to begin the process?

（A）Export me data as xml.

（B）Create a gatekeeper on the SAF utility server

（C）Create a single .zip file of all data exports

（D）Create a new opportunity.

正解：C 解答を投票する

HPE0-J58 無料問題集「HP Designing Multi-Site HPE Storage Solutions」

弊社を連絡する

関連リンク

トップ試験