PW0-205 無料問題集「CWNP Certified wireless analusis professional(cwap)」

（A）CF-End + CF-ACK

（B）Data + CF-ACK

（C）RTS

（D）Null Function

（E）CF-Poll

（A）This model of access point does not support 802.11 compliant Power Save mode.

（B）Beacons transmitted by 802.11 IBSS networks do not include TIMs.

（C）Beacons only contain TIMs when the Power Management bit in the Frame Control field of the MAC header is set to 1

（D）This Beacon was captured on channel 2 but was transmitted on channel 1. This caused a loss of information elements within the Beacon.

（E）This Beacon frame is using a DTIM instead of a TIM.

（A）Measuring the baseline throughput across particular access points in the wireless LAN network after installation.

（B）Identifying rogue access points and stations on the wireless network and generating alarms that can be read by a centralized console.

（C）Analyzing the number and type of wireless LAN attacks over a period of time

（D）Troubleshooting conversations between wireless nodes and other nodes (both wired and wireless) on the network.

（E）Analyzing the average throughput of a single user across an ESS over a period of time.

（A）This analyzer trace displays one PING Request / PING Reply packet exchange between a wireless client station and a wired station through an access point.

（B）This analyzer trace displays two PING Request / PING Reply packet exchanges between two wireless client stations that are part of an IBSS.

（C）This analyzer trace displays two PING Request / PING Reply packet exchanges between two wireless client stations through an access point.

（D）This analyzer trace displays one PING Request / PING Reply packet exchange between two wireless client stations through an access point

（A）The access point has both 1 Mbps and 2 Mbps configured as basic rates.

（B）This Beacon Management frame came from an 802.11g access point.

（C）ERP-OFDM mobile stations must use the RTS/CTS protocol before Data transmissions

（D）The access point is operating on channel 3.

（E）The duration value of 0 usec means that this access point is operating in PCF mode.

（A）DIFS expiration must occur.

（B）The station must receive a CF-Poll frame from the access point.

（C）The client station's carrier-sense mechanism must have determined that the medium is idle.

（D）The Backoff timer must expire.

（E）The access point must send a CF-End frame.

（F）The NAV must be equal to zero.

（G）PIFS expiration must occur.

（A）During any part of the Superframe

（B）During the Contention Window

（C）During the Defer Window

（D）During a DCF Interframe Space

（E）During the Contention-free Period

（A）Four wireless stations are operating as two separate Ad Hoc networks.

（B）Four access points are on the same channel in the same physical area.

（C）One access point is operating in PCF mode. The screenshot is not displaying CF-Poll frames that have been filtered out.

（D）Three wireless stations are participating in an Ad Hoc wireless LAN.