次の認定試験に速く合格する！

簡単に認定試験を準備し、学び、そして合格するためにすべてが必要だ。

会員センターカート (0)

VCP-550 無料問題集「VMware Certified Professional on vSphere 5」

ページ: 1 / 15
トータル 267 問

サインアップ、ログインされた後に、試験全体を無料で表示できるようになります。

完全版を入手する

質問 1

-- Exhibit -

-- Exhibit -
A vSphere administrator assigns VLAN 3389 to the Production port group on the VCP_DCV_Example vSphere Distributed Switch. After the change, users report a loss of connectivity to their applications. Further analysis provides the following data:
The cluster has not had a ESXi host failure.
Application functioned normally prior to the change.
The loss of connectivity occurred immediately following the change. Which condition would cause this loss of connectivity?

（A）The physical switch ports used by the vmnics have not been configured with 802.1Q.

（B）A load balancing setting on the port group conflicts with the load balancing setting of the switch.

（C）Maintenance Mode was initiated on one of the hosts in the cluster. Connectivity will resume after the virtual machines are migrated.

（D）All uplinks were removed from the VCP_DCV_Example switch and added to another virtual switch.

正解：A 解答を投票する

質問 2

A system administrator detects that a VDP Appliance that has been operational for 6 months has become inconsistent or unstable.
Which action should the administrator take to recover the VDP appliance and what will be the impact on the vSphere environment?

（A）Perform a VDP rollback to the most recent validated checkpoint. Configuration changes after the checkpoint will be lost, but backup data will remain intact.

（B）Perform a VDP rollback to the most recent validated checkpoint. All backup and configuration changes made after the checkpoint will be lost.

（C）Restore a copy of the latest backup of the VDP appliance. All configuration changes after the backup was made will be lost, but backup data will remain intact.

（D）Restore a copy of the latest backup of the VDP appliance. All backup data and configuration changes after the backup was made will be lost.

正解：B 解答を投票する

質問 3

A new LUN from an existing storage array is presented to a vSphere cluster. A vSphere administrator determines that the LUN is visible on all but one ESXi host in the cluster. The affected host is able to see existing LUNs presented from the same storage array.
What is the most likely cause?

（A）LUN Masking is improperly configured on the storage array.

（B）The ESXi host has NOT been rebooted.

（C）The HBA in the host is incompatible with ESXi.

（D）The SAN fabric is improperly zoned.

正解：A 解答を投票する

質問 4

-- Exhibit -

-- Exhibit --
A vSphere administrator attempts to manually vMotion a virtual machine but receives error
messages related to the Shared Storage datastore shown in the exhibit.
The administrator uses the vSphere Web Client and locates the datastore settings shown:
Which action should the administrator take to resolve these errors?

（A）Reconnect server3 to the vCenter server.

（B）Right-click Not connected and select Connect.

（C）Remove server3 from the cluster then re-add it.

（D）Select server3 and click Mount.

正解：D 解答を投票する

質問 5

What is a characteristic of Virtual SAN?

（A）It supports native snapshots and SE Sparse disks.

（B）It supports Virtual Machine Storage Policies.

（C）It supports multiple Virtual SAN clusters for each host.

（D）It supports storage attached through USB, Fibre Channel, or iSCSI.

正解：B 解答を投票する

質問 6

An administrator is deploying vSphere using a NAS device as the shared storage system. The administrator has already created a VMkernel port, enabled the NFS client, and configured a mount point accessible to the hosts.
Which additional configuration is required before the datastore can be used to create virtual machines?

（A）The NAS must support NFS version 4.

（B）The ESXi hosts must have root access to the datastore.

（C）The MTU on the VMkernel port must be set to 9000.

（D）Port binding must be configured on the VMkernel port.

正解：B 解答を投票する

質問 7

A vSphere administrator notices that hosts are not powering off when the total cluster load is low on a cluster configured with Dynamic Power Management.
What condition could cause this behavior?

（A）The DRS migration threshold is set to the most conservative setting.

（B）The DRS migration threshold is set to the most aggressive setting.

（C）The DPM migration threshold is set to the most conservative setting.

（D）The DPM migration threshold is set to the most aggressive setting..

正解：A 解答を投票する

質問 8

An administrator has deployed vSphere Data Protection and wants to configure several virtual machine backup jobs. When using the vSphere client on a Windows 7 desktop, the administrator notices that there is no icon for vSphere Data Protection in the Solutions and Applications area of the vSphere client.
What is the reason the administrator is unable to access vSphere Data Protection from the vSphere client on their desktop?

（A）Accessing vSphere Data Protection requires the use of the vSphere Web Client.

（B）The vSphere Data Protection plug-in is disabled in the vSphere Client on the administrator's desktop.

（C）The administrator's desktop does not have connectivity to the vSphere Data Protection virtual appliance.

（D）The vSphere Data Protection client plug-in is not installed on the administrator's desktop.

正解：A 解答を投票する

質問 9

Which feature requires an administrator to configure an RDM with Virtual Compatibility Mode?

（A）Virtual Machine Snapshots

（B）N-port ID Virtualization

（C）High Availability

（D）vMotion

正解：A 解答を投票する

質問 10

A vSphere administrator attempts to move a powered on virtual machine into a resource pool that is configured in an HA/DRS cluster. The operation fails.
What condition would cause this behavior?

（A）The virtual machine's hardware level did not match the level of the existing virtual machines in the resource pool.

（B）HA admission control prevented the movement of the virtual machine due to insufficient resources.

（C）The virtual machine was not powered off before being moved into the resource pool.

（D）Resource pool admission control prevented the movement of the virtual machine due to insufficient resources.

正解：D 解答を投票する

質問 11

Using the vSphere Web Client to display Software iSCSI Initiator properties reveals that
one of two configured paths is Not Used.
The ESXi syslog events are as shown:
-- Exhibit --

-- Exhibit -
What is the root cause of the problem?

（A）The VMKernel adapter named vmk3 is on a different vSwitch from vmk1.

（B）The path will only become Active if the VMkernel adapter named vmk1 loses connectivity.

（C）The VMkernel adapter named vmk3 has lost network connectivity.

（D）The VMkernel adapter named vmk3 is on a subnet different from the iSCSI server's subnet.

正解：D 解答を投票する

質問 12

An application server has been added to an existing multi-tier application contained in a vApp. Shortly after a planned maintenance event, users are unable to access the application.
What does the vSphere administrator need to change to ensure the application can be accessed?

（A）The startup order of the vApp

（B）The Memory Shares to High

（C）The shutdown option to power off the virtual machines

（D）The IP Allocation policy to DHCP

正解：A 解答を投票する

質問 13

Which two are supported object types for Update Manager? (Choose two.)

（A）vApps

（B）templates

（C）virtual appliances

（D）hosts

正解：C、D 解答を投票する

質問 14

An administrator is re-provisioning an ESXi host and moving it to another datacenter.
Which DCUI option should the administrator use to revert the system configuration to the default settings?

（A）Reset System Configuration

（B）Renew Default System Configuration

（C）Revert System Configuration

（D）Rebuild Default System Configuration

正解：A 解答を投票する

質問 15

A large medical institution needs to centralize malware and anti-virus scanning in its environment.
Which vSphere component will satisfy this requirement?

（A）vShield Endpoint

（B）vCenter Operations Manager

（C）vCloud Network and Security

（D）vSphere Data Protection Advanced

正解：A 解答を投票する

質問 16

Which VLAN configuration requires switch connectivity defined as an access port?

（A）External Switch Tagging

（B）Virtual Switch Tagging

（C）Virtual Guest Tagging

（D）Private VLAN

正解：A 解答を投票する

質問 17

Which two statements accurately describes step that are taken to recover a virtual machine using vSphere Replication? (Choose two.)

（A）Upon recovery, the virtual machine must be manually attached to a network.

（B）Upon recovery, the virtual machine is automatically attached to it's configured network.

（C）A recovery is initiated from the source site.

（D）A recovery is initiated from the target site.

正解：A、D 解答を投票する

質問 18

-- Exhibit -

-- Exhibit -
The vSphere administrator needs to remove the Production virtual machine port group from an ESXi host. The ESXi host's Networking Configuration tab is shown in the exhibit.
After disconnecting the Fileserver02 VM, what step does the administrator need to take, assuming that vSwitch1 will still be needed for further configuration?

（A）Remove the Production port group by accessing the properties for the Network.

（B）Remove the Production port group by removing vSwitch1.

（C）Remove the Production port group by accessing the properties for the port group.

（D）Remove the Production port group by accessing the properties for vSwitch1.

正解：D 解答を投票する

質問 19

The vSphere administrator needs to check the system health of an ESXi 5.x host using the vSphere Web Client. Which option in the Monitor tab should the administrator use for the selected host?

（A）Issue Log

（B）Storage Status

（C）Hardware Reports

（D）Performance

正解：D 解答を投票する

ページ: 1 / 15
トータル 267 問

VCP-550 の機能をすべて解除する

キャプチャ不要
365日無料更新サービス
希望する合格率を設定できる
時間の割り当てられる（時間：分）
VCP-550 に2つの練習用モード
サポートサービス対応

完全版を入手する

弊社を連絡する

我々は１２時間以内ですべてのお問い合わせを答えます。

オンラインサポート時間：( UTC+9 ) 9:00-24:00
月曜日から土曜日まで

サポート：現在連絡

トップ試験

1Z0-1056-24 試験問題集
C-TS422-2504 試験問題集
Media-Cloud-Consultant 試験問題集
PMI-RMP 試験問題集
C_THR87_2505 試験問題集
350-601 試験問題集

VCP-550 無料問題集「VMware Certified Professional on vSphere 5」

弊社を連絡する

関連リンク

トップ試験