D-VXR-DY-23無料問題集「EMC Dell VxRail Deploy 2023」

質問 1

An implementation engineer is tasked with expanding an 8-node VxRail E560 cluster with an S570 node. The cluster has been configured with 1 GbE networking.
Which two should be considered when planning to expand the cluster? (Select 2)

（A）All nodes in the cluster must be the identical series

（B）Node limit has been reached on the cluster

（C）E Series nodes require more capacity before expansion

（D）AMD and Intel based nodes cannot be mixed

正解：B、D 解答を投票する

質問 2

A VxRail solution will be deployed with the embedded vCenter and an external DNS At a minimum, for which components must DNS records be created?

（A）vCenter Server Platform Services Controller, and iDRAC

（B）vCenter Server Platform Services Controller, and VxRail Manager

（C）vCenter Server, ESXi hosts, and VxRail Manager

（D）ESXi Hosts, VxRail Manager and iDRAC

正解：C 解答を投票する

質問 3

What action is required to enable VxRail Manager the ability to update system software and browse VxRail KB articles?

（A）Enable Secure Remote Support (SRS)

（B）Set the appliance status to 'Installed' in the Dell EMC Install database

（C）Set the Username and Password for the Support Account

（D）Configure Proxy settings

正解：C 解答を投票する

質問 4

A VxRail cluster is being installed with Dell ToR switches at a "dark site." The administrator is not able to use the NVT tool.
Which command can they run on the ToR to verify VLANs are created, active, and properly configured on the uplink ports?

（A）show port-channel summary

（B）show interface status

（C）show vlan

（D）ping default gateway

正解：C 解答を投票する

質問 5

For which typical activity would the No data migration setting be used when placing a VxRail host into maintenance mode?

（A）Shutting down an entire cluster

（B）Relocating host to remote data center

（C）Permanently removing host from cluster

（D）Temporary maintenance

正解：A 解答を投票する

質問 6

Which steps need to be taken to perform a file based restore of VxRail Manager?

（A）Restore the initial clone of the VxRail Manager VM and it will update itself to the latest status.

（B）Deploy a new VxRail Manager VM and restore the configuration from backup with the vxm_backup_restore.py script.

（C）Deploy a new VxRail Manager VM and rediscover the cluster environment executing the vxm_cluster_discovery.py script.

（D）Restore the latest cloned copy of the VxRail Manager VM from the BOSS drives on nodes 1 and 2.

正解：B 解答を投票する

質問 7

An implementation engineer is performing a precheck on a VxRail cluster before expansion. During validation, they find out that the host is not compatible. Use the VxRail simulator to describe why the host is Incompatible. Note: It is necessary to close (x) the simulator window before you can select a response to this question.

（A）bmc and bios are running older versions

（B）Invalid vCenter 5erver license

（C）Insufficient number of vSphere licenses

（D）Firmware of ESXi host needs to be updated

正解：B 解答を投票する

質問 8

A VxRail Cluster has just been deployed. Use the VxRail simulator to determine the Service Tag, Model, and ESXJ IP Address of the first node - vcluster730.esx01.edu.local. Note: It is necessary to dose (x) the simulator window before you can select a response to this question.

（A）Option D

（B）Option B

（C）Option C

（D）Option A

正解：A 解答を投票する

質問 9

A company has a simple, 4 node VxRail cluster. The VxRail is running version 3.5 and utilizes a vSphere standard license. The company has asked for a VxRail software upgrade.
What are the steps for the upgrade?

（A）Log in to VxRail Manager, select "Internet Upgrade", then follow the prompts.

（B）Place all four nodes into maintenance mode.

（C）Log in to support.emc.com and download the upgrade packages.

（D）Contact Dell EMC support to request the upgrade to the VxRail cluster.

正解：C 解答を投票する

質問 10

A VxRail Stretched Cluster will be configured with four All-Flash nodes at each site based on the following requirements:
PFTT = 1
SFTT = 1
FTM = Erasure Coding
Based on the required usable capacity, what should be the planned capacity of the design?

（A）Single Site Capacity = 200% Total Cluster Capacity = 400%

（B）Single Site Capacity = 150% Total Cluster Capacity = 300%

（C）Single Site Capacity = 133% Total Cluster Capacity = 266%

（D）Single Site Capacity = 100% Total Cluster Capacity = 200%

正解：C 解答を投票する

質問 11

What guideline should be followed when planning bandwidth between sites hosting VM objects and the witness nodes?

（A）5 ms with a recommended minimum bandwidth of 10Gbps

（B）500 ms roundtrip (< 250 ms one way)

（C）2 Mbps for every 1000 objects on the vSAN

（D）1500 MTU on the VSAN vmkernel interface

正解：C 解答を投票する

質問 12

A VxRail cluster is being deployed in a DMZ environment.
What is the recommended deployment option?

（A）External vCenter Server with VxRail-deployed VDS

（B）Internal vCenter Server with external DNS

（C）External vCenter Server with customer-supplied VDS

（D）Internal vCenter Server with internal DNS

正解：B 解答を投票する

質問 13

A system administrator wants to collect a generated log file via the VxRail REST API.
Which command should they use?

D-VXR-DY-23 無料問題集「EMC Dell VxRail Deploy 2023」

弊社を連絡する

関連リンク

トップ試験