あなたを必ず合格させるSPLK-1003問題集PDF 2023年最新のに更新されたのは181問あります
Splunk SPLK-1003リアル試験問題と解答を無料で提供いたします
質問 # 43
The LINE_BREAKER attribute is configured in which configuration file?
- A. transforms.conf
- B. indexes.conf
- C. inpucs.conf
- D. props.conf
正解：D
質問 # 44
An add-on has configured field aliases for source IP address and destination IP address fields. A specific user prefers not to have those fields present in their user context. Based on the default props.conf below, which SPLUNK_HOME/etc/users/buttercup/myTA/local/props.conf stanza can be added to the user's local context to disable the field aliases?
- A. Option D
- B. Option C
- C. Option B
- D. Option A
正解：C
質問 # 45
How would you configure your distsearch conf to allow you to run the search below? sourcetype=access_combined status=200 action=purchase splunk_setver_group=HOUSTON A)
B)
C)
D)
- A. Option D
- B. Option C
- C. option A
- D. Option B
正解：B
解説：
https://docs.splunk.com/Documentation/Splunk/8.0.3/DistSearch/Distributedsearchgroups
質問 # 46
Which valid bucket types are searchable? (select all that apply)
- A. Hot buckets
- B. Frozen buckets
- C. Cold buckets
- D. Warm buckets
正解：A、C、D
質問 # 47
Immediately after installation, what will a Universal Forwarder do first?
- A. Automatically detect any indexers in its subnet and begin routing data.
- B. Begin reading local files on its server.
- C. Begin generating internal Splunk logs.
- D. Send an email to the operator that the installation process has completed.
正解：C
解説：
Begin generating internal Splunk logs. Immediately after installation, a Universal Forwarder will start generating internal Splunk logs that contain information about its own operation, such as startup and shutdown events, configuration changes, data ingestion, and forwarding activities1. These logs are stored in the $SPLUNK_HOME/var/log/splunk directory on the Universal Forwarder machine2.
質問 # 48
Which setting allows the configuration of Splunk to allow events to span over more than one line?
- A. BREAK_ONLY_BEFORE = <REGEX pattern>
- B. SHOULD_LINEMERGE = false
- C. BREAK_ONLY_BEFORE_DATE = true
- D. SHOULD_LINEMERGE = true
正解：A
質問 # 49
What conf file needs to be edited to set up distributed search groups?
- A. search.conf
- B. distibutedsearch.conf
- C. distsearch.conf
- D. props.conf
正解：C
解説：
Explanation
"You can group your search peers to facilitate searching on a subset of them. Groups of search peers are known as "distributed search groups." You specify distributed search groups in the distsearch.conf file"
質問 # 50
Where should apps be located on the deployment server that the clients pull from?
- A. $SFLUNK_KOME/etc/apps
- B. $SPLUNK_HCME/etc/master-apps
- C. $SPLUNK_HCME/etc/sear:ch
- D. $SPLUNK HCME/etc/deployment-apps
正解：D
解説：
Explanation
After an app is downloaded, it resides under $SPLUNK_HOME/etc/apps on the deployment clients. But it resided in the $SPLUNK_HOME/etc/deployment-apps location in the deployment server.
質問 # 51
In inputs. conf, which stanza would mean Splunk was only reading one local file?
- A. [monitor::/ opt/log/crashlog/Jan27crash.txt]
- B. [monitor:/// opt/log/ crashlog/Jan27crash.txt]
- C. [monitor:/// opt/log/]
- D. [read://opt/log/crashlog/Jan27crash.txt]
正解：A
解説：
Explanation
[monitor::/opt/log/crashlog/Jan27crash.txt]. This stanza means that Splunk is monitoring a single local file named Jan27crash.txt in the /opt/log/crashlog/ directory1. The monitor input type is used to monitor files and directories for changes and index any new data that is added2.
質問 # 52
Which data pipeline phase is the last opportunity for defining event boundaries?
- A. Indexing phase
- B. Parsing phase
- C. Search phase
- D. Input phase
正解：B
解説：
Reference https://docs.splunk.com/Documentation/Splunk/8.2.3/Admin/Configurationparametersandthedatapipeline The parsing phase is the process of extracting fields and values from raw data. The parsing phase respects LINE_BREAKER, SHOULD_LINEMERGE, BREAK_ONLY_BEFORE_DATE, and all other line merging settings in props.conf. These settings determine how Splunk breaks the data into events based on certain criteria, such as timestamps or regular expressions. The event boundaries are defined by the props.conf file, which can be modified by the administrator. Therefore, the parsing phase is the last opportunity for defining event boundaries.
質問 # 53
After how many warnings within a rolling 30-day period will a license violation occur with an enforced Enterprise license?
- A. 0
- B. 1
- C. 2
- D. 3
正解：D
解説：
Explanation/Reference: https://docs.splunk.com/Documentation/Splunk/8.0.5/Admin/Aboutlicenseviolations
質問 # 54
Which configuration files are used to transform raw data ingested by Splunk? (Choose all that apply.)
- A. inputs.conf
- B. transforms.conf
- C. rawdata.conf
- D. props.conf
正解：B、D
解説：
https://docs.splunk.com/Documentation/Splunk/8.1.1/Knowledge/Configureadvancedextractionswithfieldtransforms use transformations with props.conf and transforms.conf to:
- Mask or delete raw data as it is being indexed
-Override sourcetype or host based upon event values
- Route events to specific indexes based on event content
- Prevent unwanted events from being indexed
質問 # 55
What options are available when creating custom roles? (select all that apply)
- A. Allow or restrict indexes that can be searched.
- B. Whitelist search terms
- C. Restrict search terms
- D. Limit the number of concurrent search jobs
正解：A
質問 # 56
What happens when there are conflicting settings within two or more configuration files?
- A. The setting with the lowest precedence is used.
- B. The setting is ignored until conflict is resolved.
- C. The setting for both values will be used together.
- D. The setting with the highest precedence is used.
正解：D
解説：
When there are conflicting settings within two or more configuration files, the setting with the highest precedence is used. The precedence of configuration files is determined by a combination of the file type, the directory location, and the alphabetical order of the file names.
質問 # 57
What is the correct order of steps in Duo Multifactor Authentication?
- A. 1 Request Login 2 Duo MFA
3. Check authentication / group mapping
4 Create User session
5. Authentication Granted
6 Log into Splunk - B. 1 Request Login
2. Connect to SAML server
3 Duo MFA
4 Create User session
5 Authentication Granted 6. Log into Splunk - C. 1. Request Login 2 Duo MFA
3. Authentication Granted 4 Connect to SAML server
5. Log into Splunk
6. Create User session - D. 1 Request Login
2 Check authentication / group mapping
3 Authentication Granted
4. Duo MFA
5. Create User session
6. Log into Splunk
正解：D
解説：
Explanation
Using the provided DUO/Splunk reference URL https://duo.com/docs/splunk Scroll down to the Network Diagram section and note the following 6 similar steps
1 - SPlunk connection initiated
2 - Primary authentication
3 - Splunk connection established to Duo Security over TCP port 443
4 - Secondary authentication via Duo Security's service
5 - Splunk receives authentication response
6 - Splunk session logged in.
質問 # 58
Which optional configuration setting in inputs .conf allows you to selectively forward the data to specific indexer(s)?
- A. _INDEXER_GROUP
- B. _INDEXER_LIST
- C. _INDEXER ROUTING
- D. _TCP_ROUTING
正解：D
質問 # 59
What are the minimum required settings when creating a network input in Splunk?
- A. Protocol, port number
- B. Protocol, username, port
- C. Protocol, port, location
- D. Protocol, IP. port number
正解：A
質問 # 60
What happens when the same username exists in Splunk as well as through LDAP?
- A. Splunk user is automatically deleted from authentication.conf.
- B. LDAP user is automatically deleted from authentication.conf
- C. Splunk settings take precedence.
- D. LDAP settings take precedence.
正解：C
質問 # 61
Which of the following statements describes how distributed search works?
- A. Search results are replicated within the indexer cluster.
- B. Forwarders pull data from the search peers.
- C. The search head dispatches searches to the search peers.
- D. Search heads store a portion of the searchable data.
正解：C
解説：
URL https://docs.splunk.com/Documentation/Splunk/8.2.2/DistSearch/Configuredistributedsearch
"To activate distributed search, you add search peers, or indexers, to a Splunk Enterprise instance that you desingate as a search head. You do this by specifying each search peer manually."
質問 # 62
In this source definition the MAX_TIMESTAMP_LOOKHEAD is missing. Which value would fit best?
Event example:
- A. MAX_TIMESTAMP_LOOKAHEAD - 10
- B. MAX_TIMESTAMP_L0CKAHEAD = 5
- C. MAX TIMESTAMP LOOKAHEAD - 30
- D. MAX_TIMESTAMF_LOOKHEAD = 20
正解：C
質問 # 63
What is a role in Splunk? (select all that apply)
- A. A classification that determines what capabilities a user has.
- B. A classification that determines if a Splunk server can remotely control another Splunk server.
- C. A classification that determines what functions a Splunk server controls.
- D. A classification that determines what indexes a user can search.
正解：A、D
解説：
A role in Splunk is a classification that determines what capabilities and indexes a user has. A capability is a permission to perform a specific action or access a specific feature on the Splunk platform1. An index is a collection of data that Splunk software processes and stores2. By assigning roles to users, you can control what they can do and what data they can access on the Splunk platform.
Therefore, the correct answers are A and D. A role in Splunk determines what capabilities and indexes a user has. Option B is incorrect because Splunk servers do not use roles to remotely control each other. Option C is incorrect because Splunk servers use instances and components to determine what functions they control3.
質問 # 64
Where should apps be located on the deployment server that the clients pull from?
- A. $SFLUNK_KOME/etc/apps
- B. $SPLUNK_HCME/etc/master-apps
- C. $SPLUNK_HCME/etc/sear:ch
- D. $SPLUNK HCME/etc/deployment-apps
正解：D
解説：
After an app is downloaded, it resides under $SPLUNK_HOME/etc/apps on the deployment clients. But it resided in the $SPLUNK_HOME/etc/deployment-apps location in the deployment server.
質問 # 65
When should the Data Preview feature be used?
- A. When extracting fields for ingested data.
- B. When validating the parsing of data.
- C. When previewing the data before searching.
- D. When reviewing data on the source host.
正解：B
解説：
The Data Preview feature should be used when validating the parsing of data. The Data Preview feature allows you to preview how Splunk software will index your data before you commit the data to an index. You can use the Data Preview feature to check the following aspects of data parsing1:
Timestamp recognition: You can verify that Splunk software correctly identifies the timestamps of your events and assigns them to the _time field.
Event breaking: You can verify that Splunk software correctly breaks your data stream into individual events based on the line breaker and should linemerge settings.
Source type assignment: You can verify that Splunk software correctly assigns a source type to your data based on the props.conf file settings. You can also manually override the source type if needed.
Field extraction: You can verify that Splunk software correctly extracts fields from your events based on the transforms.conf file settings. You can also use the Interactive Field Extractor (IFX) to create custom field extractions.
The Data Preview feature is available in Splunk Web under Settings > Data inputs > Data preview. You can access the Data Preview feature when you add a new input or edit an existing input1.
The other options are incorrect because:
A) When extracting fields for ingested data. The Data Preview feature can be used to verify the field extraction for data that has not been ingested yet, but not for data that has already been indexed. To extract fields from ingested data, you can use the IFX or the rex command in the Search app2.
B) When previewing the data before searching. The Data Preview feature does not allow you to search the data, but only to view how it will be indexed. To preview the data before searching, you can use the Search app and specify a time range or a sample ratio.
C) When reviewing data on the source host. The Data Preview feature does not access the data on the source host, but only the data that has been uploaded or monitored by Splunk software. To review data on the source host, you can use the Splunk Universal Forwarder or the Splunk Add-on for Unix and Linux.
質問 # 66
......
Splunk SPLK-1003認定試験は、ITの専門家がSplunk Enterpriseの展開の展開と管理におけるスキルと知識を実証する優れた方法です。この認定は雇用主によって高く評価されており、ITの専門家が競争の激しい雇用市場で際立っているのを助けることができます。あなたがベテランITプロフェッショナルであろうと、キャリアを始めたばかりであろうと、Splunk Enterprise認定管理者認定を獲得することは、専門能力開発への貴重な投資になります。
合格できるSplunk SPLK-1003試験情報と無料練習テスト：https://www.jpntest.com/shiken/SPLK-1003-mondaishu