ベストな準備プラン5V0-42.21試験2023年最新のVMware SD-WAN Design and Deploy 2021無制限53問題
注目すべき時短になる5V0-42.21オールインワン試験ガイド
質問 20
An administrator has been receiving complaints about their SaaS business collaboration apps.
Which network service should the administrator use to resolve the issue?
- A. Direct
- B. Backhaul
- C. Multi-Path
- D. CoS mapping
正解: A
質問 21
A customer has a hybrid VMware SD-WAN deployment and wants to use the SD-WAN Service Reachable feature on the private WAN.
What is the main dependency that must be met for the feature to work?
- A. Default route learned via dynamic routing
- B. Static mute for gateway IPs on the edge
- C. Internet reachability via the private WAN
- D. Gateway IPs must be routed in the overlay
正解: A
質問 22
Given a VMware SD WAN Branch Edge with Dual Internet links A and B:
* Link A has 50 Mb capacity and latency 10ms
* Link H has 50 Mb capacity and latency 10ms
A database backup of 40Mbps is parted, and the traffic classified as low priority bulk traffic.
Which statement is correct?
- A. Packet duplication will take plant? to ensure both links are optimized.
- B. Packets will be sent nut the highest latency link first as this is low priority bulk traffic
- C. Link Aggregation may take place, and both links could be used.
- D. DMPO will perform pen How load balancing.
正解: C
質問 23
A customer is using Office 365.
How would the VMware SD-WAN recognize this application correctly?
- A. VMware SD-WAN will use SSL inspection to detect Office 365.
- B. Office 365 has to be added as part of customizing the Application Map by TCP/UDP port and subnet ranges.
- C. Top SaaS Apps (TLS encrypted) are identified using put. IP and port ranges Other TLS traffic can be identified based on the certificate information.
- D. The VCE supports prioritization and QoS. Each application is assigned one of the three Service Classes and three Business Priorities.
正解: A
質問 24
During a VMware SD-WAN design session for a core business application, a customer expressed the following requirements:
* Allow business abstraction so that similar policies can be applied across different hardware types.
* Eliminate the need for the operations team to know the type of physical connectivity or the WAN carrier.
* Maintain SLA for real-time application.
Which design should be taken in terms of Link Steering?
- A. Deselect Error Correct before Steering Defaults.
- B. Select Transport Group, and then select Preferred option.
- C. Select Error Correct Before Steering with % definition
- D. Select WAN Link, and then define the DSCP tagging
正解: D
質問 25
Which deployment model ensures that management and control plane is cloud-delivered while data continues to flow on-premises between VMware SD-WAN nodes that remain on-premises?
- A. Hosted SD-WAN Orchestrator/Controller
- B. All on-premises
- C. Partially on-premises
- D. On-premises SD-WAN Orchestrator/Controller
正解: B
質問 26
A service provider needs to ensure that the NOC is notified proactively in the event that an Edge interface loses connectivity to its WAN provider.
Which three methods are available for generating these alerts? (Choose three.)
- A. Push notification via the VMware SD WAN mobile app
- B. Dyinq Gasp
- C. Text/SMS
- D. Webhook
- E. SNMP Trap
- F. Slack notification
正解: A,B,C
質問 27
A customer is migrating a branch site with a VMware SD-WAN Edge coexisting with the CE. The Edge will be connected to internet link directly while connecting to the CE via a Layer 3 LAN switch.
MPLS underlay is the preferred path for communication from this site to branch sites that have no VMware SD-WAN Edges. Communication from this site to branch sites that have VMware SD-WAN Edges should go through overlay.
- A. Use BGP as the routing protocol on the Edge and flag its HGP neighbor to PE as Uplink.
- B. Use BGP as the rout.ng protocol on UK Edge and flag its BGP neighbor to the Layer 3 LAN switch as Uplink.
- C. Use BGP as the routine, protocol on the Edge and flag its BGP neighbor to GE as Uplink.
- D. Use BGP as the routing protocol on the Edge and filter prefixes from CE using Uplink Community
正解: A
質問 28
A customer is looking to have Quality of Service (QoS), resource allocations, link/path steering, and error correction applied automatically based on applications.
Which component of VMware SD-WAN helps the customer achieve this requirement?
- A. High Availability Configuration
- B. Branch Site Topologies
- C. Business Policy Framework
- D. Overlay Flow Control
正解: C
質問 29
An Enterprise customer just acquired a new company, and the Network Enterprise administrator was tasked to integrate over 20 new branches into their existing SD-WAN network. However, these branches have overlapping IPs with the existing branches subnets.
- A. Configure a LAN-side NAT rule at the branchdevice settings, translating its subnets into a new non-overlapping subnet
- B. Configure a NAT hand off rule at the VMware SD WAN gateway assigned to these new blanches, translating the new branch subnets into a new nan-overlappingsubnet
- C. Configure a NAT firewall rule in each branch, translating itssubnets into a new non-overlapping subnet
- D. Configure a policy based NAT tor each branch translating its subnets Into a new non-overlappingsubnet
正解: A
質問 30
A MSP partner needs to setup a Partner Gateway and configure the Handoff Interlace.
Which are the valid configuration options for the Tag type?
- A. None, 802 1q. 802_1ac, and Qin(0x8100) / QinQ(0x9100)
- B. None, 802 1q, 802 3ad, and QinQ(0x8100) / QinQ(0x9100)
- C. None, 802 1d, 802.1ad, and QinQ(0x8100)/ QinQ(0x9100)
- D. None. 802. 1q. 802, 1 ad, arid QinQ(0x8100) / QinQ(0x9100)
正解: D
質問 31
During a security-related discussion, an administrator determines that guest users not be able to access any resources on the corporate network.
Which VMware SD-WAN feature can achieve this goal in the most scalable and manageable way?
- A. Segments
- B. Business Policy
- C. Firewall
- D. VLANs
正解: A
質問 32
Which feature is required to prevent a split-brain condition for a branch in an Enhanced HA
- A. SD-WAN Service Reachable on the private overlay
- B. Cloud VPN
- C. Split Brain Detection
- D. VRRP
正解: A
質問 33
Which statement is correct about VMware SD-WAN Orchestrator user roles and their associate privileges?
- A. Superuser: User can view but cannot create additional admin.
- B. Standard Admin User can view but cannot manage their customer.
- C. Customer Support User can view and manage then company's network
- D. Enterprise read only: User can view but not modify configurations.
正解: C
質問 34
Due to very strict security policies an enterprise customer is looking for an on-premises deployment of the VMware SD-WAN Orchestrator and Controllers. Customer data is not expected to flow through this Controller, however it is desirable that management plane traffic towards the Orchestrator coming from VMware SD-WAN Edges can take the overlay tunnels through this controls.
What are some of the needed steps to achieve the requirements above?
- A. Under gateway configuration -> Configure the Gateway roles as Control-Plane, enable Data Plane and Partner Gateway role and add static host mules with NAT hand off settings pointing to the Orchestrator IPs under Partner Gateway advanced hand off settings
- B. Under gateway configuration -> Configure the Gateway roles as Control Plane, disable Data Plane and enable management plane forward
- C. Under gateway configuration -> Configure the Gateway roles as Control-Plane, enable Data Plant- and Partner Gateway role and add a static default route with NAT hand off settings under Partner Gateway advanced hand oft settings
- D. Under gateway configuration -> Configure the Gateway roles as Control Plane, disable Data Plane and add static host routes with NAT hand off settings porting to the Orchestrator IPs under Partner Gateway advanced hand off settings
正解: A
質問 35
A network administrator is concerned about an Edge that may be approaching its documented limit for the number of simultaneous tunnels. The historical data showing the number of simultaneous tunnels over the time needs to be checked.
Where can this historical data be found?
- A. Use the SNMP manage poll the vcelHealthObject tree in the VELOCLOUD-EDGE-MIB
- B. In the Remote Diagnostics section of the UI, run the ''Total Counts dump'' test.
- C. In the Monitoring section for the Edge in question, navigate to the ''System'' tab.
- D. Connect to the Edge CLI via SSH, and /opt/vc/bin/debug-py- tunnel_count
正解: A
質問 36
......
合格保証付き5V0-42.21問題集：https://www.jpntest.com/shiken/5V0-42.21-mondaishu