初心者向けのHPE6-A73試験 [2023] 問題集でHPのPDF問題
HPE6-A73プレミアム試験エンジンPDFをダウンロード
HP HPE6-A73試験は、90分以内に60の多肢選択問題に回答する必要があります。この試験は監督付きの環境で実施され、対面またはリモートで受験することができます。合格基準は70%であり、試験に合格した候補者は、Aruba Certified Switching Professional（ACSP）認定を受け取ります。
質問 # 61
An administrator will be implementing tunneling between AOS-CX switches and Aruba gateways. Which list of protocols must minimally be allowed by an intermediate firewall between two sets of devices?
- A. UDP 4500 and IP protocol 47
- B. UDP 8211 and IP protocol 47
- C. IP protocol 50 and UDP 8209
- D. UDP 4500 and UDP 8209
正解：B
解説：
ACSP Study Guide Page 788 - Allow the following protocols/ports
- PAPI: UDP 8211
- GRE: Protocoll 47
質問 # 62
What must a network administrator implement in order to run an NAE script on an AOS-CX switch?
- A. Schedule
- B. Plan
- C. Deployment
- D. Agent
正解：D
質問 # 63
A company has an existing wireless solution involving Aruba APs and Mobility controllers running 8.4 code.
The solution leverages a third-party AAA solution. The company is replacing existing access switches withAOS-CX 6300 and 6400 switches. The company wants to leverage the same security and firewall policies forboth wired and wireless traffic.
Which solution should the company implement?
- A. User-based tunneling
- B. Downloadable user roles
- C. RADIUS dynamic authorization
- D. IPSec
正解：C
質問 # 64
A network administrator is implementing a configuration plan in NetEdit The administrator used NetEdit to push the configuration plan to the switch. Which option in the NetEdit planning section should the administrator select to save the configuration running on the switch to the startup-config?
- A. COMMIT
- B. EDIT
- C. VALIDATE
- D. DEPLOY
正解：A
質問 # 65
The two PCs are located in VLAN 11 (10 1 11 0/24} Which example defines how to implement active gateway on the vsx core for VLAN 11?
A)
B)
C)
D)
- A. Option
- B. Option
- C. Option
- D. Option
正解：D
質問 # 66
A company requires access by all users, guests, and employees to be authenticated. Employees will be authenticated using 802.1X, whereas guests will be authenticated using captive portal. Which type of authentication must be configured on an AOS-CX switch ports where both guests and employees connect?
- A. Both 802.1X and captive portal
- B. 802.1X, captive portal, and MAC-Auth
- C. Both 802.1X and MAC-Auth
- D. 802.1X only
正解：C
質問 # 67
An administrator is replacing the current access switches with AOS-CX switches. The access layer switches must authenticate user and networking devices connecting to them. Some devices support no form of authentication, and some support 802.1X. Some ports have a VoIP phone and a PC connected to the same port, where the PC is connected to the data port of the phone and the phone's LAN port is connected to the switch.
Which statement is correct about this situation?
- A. Device fingerprinting is required for authentication
- B. The client-limit setting for port access needs to be changed
- C. Device mode should be implemented
- D. 802.1X must be configured to work in fallback mode
正解：B
解説：
fallback mode if for the radius part; client limit is for multiple authent on one port (ie phone + pc) From doc :
aaa port-access authenticator <port-list> client-limit <1-32>
Used after executing aaa port-access authenticator <port-list> to convert authentication from port-based to user-based. Specifies user-based 802.1X authentication and the maximum number of 802.1X-authenticated client sessions allowed on each of the ports in <port-list>. If a port currently has no authenticated client sessions, the next authenticated client session the port accepts determines the untagged VLAN membership to which the port is assigned during the session. If another client session begins later on the same port while an earlier session is active, the later session will be on the same untagged VLAN membership as the earlier session.
質問 # 68
A network engineer is examining NAE graphs from the Dashboard but notices that the time shown in the graph does not represent the current time The engineer verifies that the AOS-CX switch is configured for NTP and is successfully synchronized. What should be done to fix this issue?
- A. Ensure NetEdit and the AOS-CX switch are synchronized to the same NTP server.
- B. Enable trust settings for the AOS-CX switch's SSL certificate
- C. Ensure the engineers web browser is configured for the same timezone as the AOS-CX switch
- D. Ensure the engineers PC is synchronized to the same NTP server as the AOS-CX switch
正解：D
質問 # 69
A company has recently purchased a ClearPass AAA solution. Their network consists of AOS-CX switches at the access layer. The company is implementing a rollout of IoT devices for smart building management to control the lighting and HVAC systems. The network administrator is concerned about allowing secure access to these devices since they only support MAC-Auth.
Which ClearPass feature should the administrator leverage to help determine that MAC address spoofing is not occurring for this group of devices?
- A. User-based tunneling
- B. Device fingerprinting
- C. RADIUS change of authorization
- D. Downloadable user roles
正解：B
質問 # 70
Refer to the exhibit.
The ACL configuration defined on Core-1 is as follows:
if telnet was being used which device connection would he permitted and functional in both directions? (Select two }
- A. Server 2 to Client 2
- B. Server 1to Client 1
- C. Client 1 to Client 2
- D. Client 1 to Client 3
- E. Client 3 to Client 2
正解：B、C
質問 # 71
An administrator of a large campus network needs a solution that will provide root cause analytics to quickly identify problems so that they can quickly be fixed.
Which AOS-CX switch feature should the administrator utilize to help with root cause analytics?
- A. NetEdit
- B. NAE
- C. VoQ
- D. VSX
正解：B
質問 # 72
A network administrator is attempting to troubleshoot a connectivity issue between a group of users and a particular server. The administrator needs to examine the packets over a period of time from their desktop; however, the administrator is not directly connected to the AOS-CX switch involved with the traffic flow.
What is correct regarding the ERSPAN session that needs to be established on an AOS-CX switch? (Choose two.)
- A. On the source AOS-CX switch, the destination specified is the switch to which the administrator's desktop is connected
- B. On the source AOS-CX switch, the destination specified is the administrator's desktop
- C. The encapsulation protocol used is GRE
- D. The encapsulation protocol is UDP
- E. The encapsulation protocol used is VXLAN
正解：A、C
解説：
In AOS CX the remote mirroring is done using a tunnel interface, so the Mirror source and destination must be configured on each Switch. On the source Switch, the source interface (from where the traffic is mirrored) and destination interface (the tunnel interface to where the traffic is sent to). In the destination Switch, the source interface (which would be the tunnel interface (receiving the traffic from the source switch tunnel)) and the destination would be the client where Wireshark enabled client is connected.
質問 # 73
What is correct regarding the operation of VSX and multicasting with PIM-SM routing configured?
- A. Each VSX peers runs PIM and builds its own group database. Both VSX peers can forward multicast streams to receivers in a VLAN, achieving load sharing
- B. Each VSX peers runs PIM and creates a shared group database. Both VSX peers can forward multicast streams to receivers in a VLAN, achieving load sharing
- C. Each VSX peers runs PIM and builds its own group database. One of the VSX peers is elected as the designated router (DR) to forward multicast streams to a receiver VLAN
- D. Each VSX peers runs PIM and creates a shared group database. One of the VSX peers is elected as the designated router (DR) to forward multicast streams to a receiver VLAN
正解：C
質問 # 74
A company has a third-party AAA server solution. The campus access layer was just upgraded to AOS-CX switches that perform access control with MAC-Auth and 802.1X. The company has an Aruba Mobility Controller (MC) solution for wireless, and they want to leverage the firewall policies on the controllers for the wired traffic.
What is correct about how the company should implement a security solution where the wired traffic is processed by the MCs?D18912E1457D5D1DDCBD40AB3BF70D5D
- A. Implement standards-based RADIUS VSAs to pass policy information directly to the AOS-CX switches and MCs
- B. Implement local user roles with a gateway role defined on the AOS-CX switches
- C. Implement downloadable user roles with a device role defined on the AOS-CX switches and MCs
- D. Implement downloadable user roles with a gateway role defined on the AOS-CX switches
正解：C
質問 # 75
Which option correctly defines how to identify a VLAN as a voice VLAN on an AOS-CX switch?
- A. Switch(config)# port-access role <role-name>
Switch^config-pa-roieW vlan access <VLAN-ID> - B. Switch(config }# vlan <VLAN-ID>
Switch(config-vtan-<VLAN*lD>)# voice - C. Switch(config)# port-access Jidp-group <LLDP-group-name>
Switch(config-Hdp-group)# vlan <VLAN-ID> - D. Switch(config)# vlan <VLAN-ID> voice
正解：B
質問 # 76
......
HP HPE6-A73試験、またはAruba Certified Switching Professional試験は、ネットワークスイッチングおよびルーティング技術に特化したITプロフェッショナルを対象としています。試験は、Arubaスイッチング製品を使用した複雑なネットワークソリューションの設計、構成、およびトラブルシューティングの知識とスキルを測定します。この試験に合格することで、候補者のArubaスイッチを使用した企業レベルのネットワークの実装と管理能力が検証されます。
あなたを合格させるHP試験にはHPE6-A73試験問題集：https://www.jpntest.com/shiken/HPE6-A73-mondaishu
検証済みHPE6-A73豪華お試しセットリアル試験問題集PDF：https://drive.google.com/open?id=1Qh6vDz3Y3tT5vzqBVpa9V0wOCixrK4W2