無料でゲット！最新の2023年最新の有効な練習MTCNA - MikroTik Training MTCNA問題と解答でテストエンジン
MTCNA問題集PDFで100%合格保証付き
MikroTik MTCNA 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
| トピック 6 |
|
| トピック 7 |
|
| トピック 8 |
|
| トピック 9 |
|
| トピック 10 |
|
| トピック 11 |
|
質問 124
Evaluate the following information:
Access Point configuration:
-- wlan1 is in 'AP-Bridge' mode
-- Bridge1 has wlan1 and ether1 as ports
CPE configuration:
-- wlan1 is in 'Station-Bridge' mode
-- Bridge1 has wlan1 and ether1 as ports
Select protocols that will pass from ether1 on the CPE to ether1 on the Access Point.
- A. Firewire
- B. DHCP
- C. ARP
- D. IPv6
- E. IPv4
- F. PPPoE
- G. BGP
- H. USB
正解: B,C,D,E,F
質問 125
In a network with dozens of switches, how many root bridges would you have?
- A. 0
- B. 1
- C. 2
- D. 3
正解: D
質問 126
Is ARP used in the IPv6 protocol?
- A. False
- B. True
正解: A
質問 127
Which of the following allows a router to respond to an ARP request that is intended for a remote host?
- A. Inverse ARP (IARP)
- B. Reverse ARP (RARP)
- C. Proxy ARP
- D. Gateway DP
正解: C
質問 128
Which one of the following is true regarding VLANs?
- A. VTP is used to send VLAN information to switches in a configured VTP domain.
- B. VLANs only work if you have a complete Cisco switched internetwork. No off-brand switches are allowed.
- C. Two VLANs are configured by default on all Cisco switches.
- D. You should not have more than 10 switches in the same VTP domain.
正解: A
質問 129
You want to use PCQ and allow 256k maximum download and upload for each client. Choose correct argument values for the required queue.
- A. kind=pcq pcq-rate=256000 pcq-classifier=src-address
- B. kind=pcq pcq-rate=1256000 pcq-classifier=dst-address
- C. kind=pcq pcq-rate=5000000 pcq-classifier=dst-address
- D. kind=pcq pcq-rate=5000000 pcq-classifier=src-address
- E. kind=pcq pcq-rate=256000 pcq-classifier=dst-address
正解: A,E
質問 130
A client uses a RouterBOARD1000. The clock is configured in '/system clock'. The clock resets to default after each reboot.
Select the best solution for the problem.
- A. Write a script in '/system script' to set the clock
- B. Configure '/system ntp server' and set a valid and reachable NTP client address.
- C. Configure '/system ntp client' and set a valid and reachable NTP server address.
- D. Open the router and ensure the CMOS battery is fine.
正解: C
質問 131
You would like to allow multiple logins with one user name on a Hot-Spot server. How should this be configured?
- A. Set "Shared Users" option at /ip Hot-Spot
- B. It's not possible
- C. Set "Shared Users" option at /ip Hot-Spot user profile
- D. Set "only-one=no' at /ip Hot-Spot
正解: C
質問 132
Why is it useful to set a Radio Name on the radio interface?
- A. To identify a station in a list of connected clients
- B. To identify a station in Neighbor discovery
- C. To identify a station in the Access List:
正解: C
質問 133
Which of the following Routes statuses are possible?
- A. D = Drop
- B. A = Active
- C. C = Connected
- D. S = Static
正解: B,C,D
質問 134
Which firewall chain would be used to block a client's MSN traffic on a router?
- A. input
- B. static
- C. output
- D. forward
正解: D
質問 135
Why is it useful to set a Radio Name on the radio interface?
- A. To identify a station in a list of connected clients
- B. To identify a station in the Access List
- C. To identify a station in Neighbor discovery
正解: C
質問 136
Select valid MACaddress
- A. G2:60:CF:21:99:H0
- B. 00:00:5E:80:EE:B0
- C. AEC8:21F1:AA44:54FF:1111:DDAE:0212:1201
- D. 192.168.0.0/16
正解: B
質問 137
Which firewall chain should you use to filter ICMP packets from the router itself?
- A. input
- B. postrouting
- C. output
- D. forward
正解: A
質問 138
It is possible to create a configuration where VLAN and PPTP interfaces are bridged together.
- A. FALSE
- B. TRUE
正解: A
質問 139
Which statements are true regarding ICMP packets?
ICMP guarantees datagram delivery.
ICMP can provide hosts with information about network problems.
ICMP is encapsulated within IP datagrams.
ICMP is encapsulated within UDP datagrams.
- A. 1 and 4
- B. 2 and 3
- C. All of the above
- D. 1 only
正解: B
質問 140
It is possible to create an encrypted PPPoE tunnel in RouterOS:
- A. true
- B. false
正解: A
質問 141
What is necessary for PPPoE client configuration?
- A. ip firewall nat masquerade rule
- B. Interface (on which PPPoE client is going to work)
- C. Static IP address on PPPoE client interface
正解: B
質問 142
What does this simple queue do (check the image)?
- A. Queue limits host 192.168.1.10 download data rate to one megabit per second.
- B. Queue guarantees upload data rate of one megabit per second for host 192.168.1.10
- C. Queue limits host 192.168.1.10 upload data rate to one megabit per second.
- D. Queue guarantees download data rate of one megabit per second for host 192.168.1.10
正解: C
質問 143
Which default route will be active?
/ip route
add disabled=no distance=10 dst-address=0.0.0.0/0 gateway=1.1.1.1
add disabled=no distance=5 dst-address=0.0.0.0/0 gateway=2.2.2.2
- A. Route via gateway 2.2.2.2
- B. Route via gateway 1.1.1.1
正解: A
質問 144
......
MTCNAブレーン問題集リアル試験最新問題2023年02月16日には216問題：https://www.jpntest.com/shiken/MTCNA-mondaishu