無料更新されたNutanix NCP-MCI-5.15テストエンジン問題には224問あります
ベストな問題集を使おうNutanix Certified Professional (NCP) NCP-MCI-5.15専門試験問題
質問 48
Which node type does not deploy a Nutanix Controller VM?
- A. Compute Only
- B. Hyper Converged
- C. Storage Only
- D. All Flash
正解: D
質問 49
which cli is used to run this command? (cluster version)
- A. ncli
- B. ecli
- C. bash shell
- D. acli
正解: A
質問 50
An administrator wants to use Volumes to connect to physical servers that are not able to be virtualized.
Which three things must be configured for Volumes to support iSCSI clients? (Choose three)
- A. Data Services IP address
- B. iSCSI Multipathing I/O
- C. Enable external client access
- D. Cluster Virtual IP address
- E. Client OS iSCSI initiator
正解: A,B,E
解説:
https://portal.nutanix.com/page/documents/details/?targetId=Web-Console-Guide-Prism-v51:wc-block-services-c.html
質問 51
An administrator is migrating ESXi VMs to a Nutanix AHV cluster. The VM data is available to the AHV system.
Which process must the administrator complete below AHV VMs can be create?
- A. Import the VMs .vmx file using the Image Service
- B. Import the VM's -flad.vmdk files using the Image Service
- C. Import the VM's .nvram file using the Image Service
- D. Rename the -flat.vmdk files for the VM based on the VM UUID
正解: B
質問 52
An Engineer logs into a CVM to troubleshoot connectivity loss between two CVMs and find the following interfaces subnets and WLANs configured.
-eth0 - VLAN10-10.1.10.0/24
eth01-No VLAN-192.168.5.0/24
eth2 - LAN20-10.1.20.0/24
Which two Nutanix networking features are being utilized? (Choose two)
- A. Backplane LAN
- B. Internal vSwitch
- C. IP address management (IPAM)
- D. Network Load balancing
正解: A,B
質問 53
Which configuration should an administrator make in Prism to receive a summary of the alerts every 24 hours?
- A. Individual Alerts
- B. Syslog
- C. Email Digest
- D. SNMP
正解: C
解説:
https://portal.nutanix.com/page/documents/details/?targetId=Prism_Central_Guide-Acr_v4_6:mul_alerts_management_pc_c.html Prism Central allows you to configure the alert messages sent by Prism Central. To configure alert settings, reporting rules, and message templates, do the following:
Note: Alert emails sent by Prism Central are in addition to any alert emails you might have configured on individual clusters through the Prism web console. You will receive email from both entities in this case. Prism Central alert emailing is not enabled by default; you must explicitly enable it and specify the recipients (Nutanix customer support and/or supplied email addresses).
* Do one of the following:
* In the gear icon pull-down list of the main menu, select Alert Email Configuration.
* In the Alerts dashboard, click the Email Configuration button.
The Alert Email Configuration window appears.
* Click the Settings tab and do the following:
* Enable Prism Central to sent alert emails.
* Check the Email Every Alert box to send an email whenever the event occurs.
* Check the Email Daily Digest box to send a cumulative (24 hour) list of alerts once a day.
You can check one or both boxes. If neither box is checked, no alert emails are sent by Prism Central.
* Check the Nutanix Support box to send alert notification to Nutanix customer support.
* To send alert notifications to others, enter their email addresses in a comma separate list in the field below the Nutanix Support box.
* Click the Apply button to apply the changes and continue the configuration (or click the Save button to apply the changes and close the window).
The Connection Status section displays mail transport status information. In this example, an SMTP server is configured for mail service. Clicking the Details link opens the SMTP server settings window
質問 54
What is the expected operation during node addition when the new node has a different AOS version?
- A. The entire cluster is upgraded to the latest one-click release.
- B. The node is automatically re-imaged using the software currently running in the cluster.
- C. The node is added and a separate upgrade operation must be performed.
- D. The addition fails and forces the administrator to image using standalone Foundation.
正解: B
質問 55
An administrator has an existing Nutanix cluster that is configured to protect VMs using. Time Stream. The administrator now needs to add support for protecting these VMs in AWs.
Which two changes must be made to the cluster to meet this requirement? (Choose two)
- A. Deploy a remote site for another cluster.
- B. Add the remote site to the existing protection domains.
- C. Configure protection domains with a 15-minute schedule.
- D. Configure a remote site.
正解: A,D
解説:
https://portal.nutanix.com/page/documents/details/?targetId=Web-Console-Guide-Prism-v55:wc-dr-management-wc-c.html
質問 56
Which Mechanism that works by data striping and parity calculation?
- A. Deduplication
- B. Compression
- C. Erasure Coding
正解: C
質問 57
An administrator wants to create a trunked interface on a VM on AOS 5.15x.
Which two steps should the administrator take first to achieve this? (Choose two)
- A. Log in over PE web UI.
- B. Use acli
- C. Update VM dialog.
- D. SSH to CVM.
正解: B,D
解説:
Reference:
https://vmwaremine.com/2019/05/09/enable-vlan-trunking-on-nutanix-ahv-vm/
#sthash.3uIAHeXZ.dpbs
質問 58
A VM user permanently deletes a directory on a guest VM. The Nutanix administrator has enabled Self-Services for this VM.
Which three steps must the administrator perform to restore the directory? (Choose Three)
- A. Select and mount the snapshot that contains the deleted directory
- B. Launch the Nutanix SSR utility on the VM
- C. Connect to the cloned VM and copy the directory to the source VM
- D. Copy the directory from the snapshot disk to the original VM disk
- E. Create a clone of the VM from a previous snapshot and replace the original VM
正解: A,B,D
質問 59
What is the proper sequence to perform a one-click upgrade to a Nutanix cluster?
Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements. Not all procedures are valid. Identify any invalid procedures using the drop-down option.
正解:
解説:
質問 60
An administrator needs to boot a VM to a bootable CD. The administrator tries to configure the VM to boot to it, select to add disk, and goes to the images available. The image for the bootable CD is unavailable.
What is the Likely issue?
- A. The administrator selected a disk attached before it can boot to a CD.
- B. The bootable CD image is corrupted during creation.
- C. The CD-ROM interface is too slow.
- D. The VM needs to have a standard disk attached before it can boot to a CD.
正解: A
解説:
Reference:
https://next.nutanix.com/prism-infrastructure-management-26/booting-vm-to-cd-no-drives-present-31800
質問 61
An administrator's cluster experiences a CVM failure. However, VMs on the nodes continue to produce I/O.
Which Distributed Storage Fabric can be attributed to this behavior?
- A. Scalable Cassandra Database
- B. VM Snapshotting and Cloning
- C. Data Path Redundancy
- D. Information Lifecycle Management
正解: C
質問 62
The feature that enables you to back up and restore copies of virtual machines and files to and from an on-prem cluster and a Nutanix Controller VM on the Amazon Web Service (AWS) or Microsoft Azure cloud.
- A. XI-Leap
- B. Acropolis Block Service
- C. Cloud Connect
正解: C
解説:
https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v55%3Awc-remote-site-configuration-c.html
質問 63
A cluster has RF2. The cluster loses two drives on different nodes in the same storage tier.
What is the effect on the replicas of the VMs?
- A. Some VM data may be lost
- B. No VMs lose data if the node has two or more SSDs
- C. Some VMs may reboot and gain access to data
- D. No VMs lose data because of RF2
正解: A
解説:
Reference:
https://next.nutanix.com/how-it-works-22/disk-fault-tollerance-8822
質問 64
what command is used to run the nutanix cluster checks from the CVM CLI?
- A. ncc check_all health_options
- B. ncc run_all_health_check
- C. ncc check_health run_all
- D. ncc health_check run_all
正解: D
質問 65
Which two targets are valid options when selecting a Remote Site in Prism? (Choose two)
- A. Cloud
- B. Tape Library
- C. XI Cloud Services
- D. Network attached storage
- E. Physical Cluster
正解: A,E
質問 66
......
Nutanix NCP-MCI-5.15 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
| トピック 6 |
|
| トピック 7 |
|
| トピック 8 |
|
| トピック 9 |
|
100%の合格率を試そう！更新されたのはNCP-MCI-5.15試験問題 [2022年更新]：https://www.jpntest.com/shiken/NCP-MCI-5.15-mondaishu