2022年最新の更新のNetApp Certifiedが有効なNS0-519問題集を無料提供しています
最新のJPNTest NS0-519PDF問題集をダウンロードしちゃおう：https://www.jpntest.com/shiken/NS0-519-mondaishu（60問題と解答)
質問 10
Click the Exhibit button.
You have an existing legacy Fibre Channel SAN environment and have deployed an ONTAP AFF A800 cluster. You are planning to migrate a NetApp Foreign LUN Import using the existing SAN environment.
Referring to the exhibit, how must the UTA2 ports be configured?
- A. Configure the FCP to initiator mode.
- B. Configure the CNA to target mode.
- C. Configure the FCP to target mode.
- D. Configure the CNA to initiator mode.
正解: A
質問 11
Click the Exhibit button.
Referring to the exhibit, which two configuration elements are required to configure an SVM to support NVMe on Red Hat Enterprise Linux? (Choose two.)
- A. In Data Protocols, choose only the NVMe protocol.
- B. Set the security style to UNIX.
- C. Set the security style to Mixed (UNIX and NTFS).
- D. In Data Protocols, choose both FC/FCoE and NVMe protocols.
正解: B,D
質問 12
An administrator added the FCP protocol to an SVM and created a LUN for a Windows Server 2019 server. After a rescan, the LUN is not visible on the host.
Which two statements describe how to solve this problem? (Choose two.)
- A. Perform takeover and giveback of both controllers.
- B. Disable and enable the FC port with the attached host, causing a FLOGI.
- C. Create an igroup, add the WWPN of the host initiator, and then map the igroup to the LUN.
- D. Create a zone with a single initiator and the target LIF's WWPN.
正解: C,D
質問 13
Click the Exhibit button.
Referring to the exhibit, how many LUNs should the server administrator see on the Windows 2016 host?
- A. 0
- B. 1
- C. 2
- D. 3
正解: D
質問 14
Click the Exhibit button.
Referring to the dual-fabric cabling diagram shown in the exhibit, which scenario explains why the customer's iSCSI host experienced a SAN outage with a LUN on Node 2?
- A. iSCSI LIFs were configured on all nodes, the SLM reporting nodes list included Node 1 and Node 2, and Node 1 went down.
- B. iSCSI LIFs were configured on Node 1 and Node 2 only, the SLM reporting nodes list included Node 1 and Node 2, and Switch 1 went down.
- C. iSCSI LIFs were configured on all nodes, the SLM reporting nodes list included all nodes, and Node 1 and Node 2 went down.
- D. iSCSI LIFs were configured on Node 2 only, the SLM reporting nodes list included Node 1 and Node 2, and the cable connecting the host to Switch 1 went bad.
正解: C
質問 15
Click the Exhibit button.
Referring to the exhibit, which switch in the fabric is the principal switch?
- A. sw4
- B. sw5
- C. sw6
- D. sw10
正解: C
質問 16
Click the Exhibit button.
A customer is troubleshooting an AFF A700 2-node cluster that is running out of space. They need to add two additional shelves, one shelf to stack-1, and a shelf to stack-2.
Referring to the exhibit, how many cables are required?
- A. 0
- B. 1
- C. 2
- D. 3
正解: C
質問 17
You plan to use Foreign LUN Import (FLI) to migrate data from an older storage array to an ONTAP cluster. You have properly cabled the storage array and the NetApp nodes to your dual-fabric SAN.
Which two steps are required for this migration and cutover? (Choose two.)
- A. Create two zones that contain NetApp initiator ports and the source storage target ports, one for each fabric.
- B. Create two zones that contain the NetApp target ports and the host initiators ports, one for each fabric.
- C. Add NetApp WWN target ports to the existing zones so that your hosts can access both storage arrays.
- D. Add NetApp WWN initiator ports to the existing zones.
正解: B,C
質問 18
You need to guarantee that SAN protocols are used in a new storage virtual machine (SVM).
In this scenario, which LIF service policy is required?
- A. default-cluster
- B. default-management
- C. default-data-files
- D. default-data-blocks
正解: D
質問 19
Which protocol provides multipathing and path management for both path and target failover for NVMe over Fibre Channel (NVMe/FC)?
- A. N_Port ID virtualization (NPIV)
- B. Asymmetric Logical Unit Access (ALUA)
- C. NVMe namespaces
- D. Asynchronous Namespace Access (ANA)
正解: D
質問 20
An administrator has taken over managing an AFF A320 4-node SAN environment with several attached hosts. The administrator is asked to inventory the environment before performing firmware updates.
In this scenario, which two tools would satisfy the requirement? (Choose two.)
- A. Brocade SAN Health Check
- B. Upgrade Advisor
- C. Active IQ OneCollect
- D. Active IQ
正解: B,C
質問 21
You are adding a new AFF A220 FIA pair to an existing FlexPod infrastructure that is using a pair of Nexus 9332PX switches. Due to rack space constraints, the AFF A220 is to be installed in an adjoining rack, and the distance from the back of the AFF A220 to the Nexus 9332PX switches is nine meters.
In this scenario, which 10Gbe cabling solution would you use to connect the AFF A220 to the Nexus 9332PX switches?
- A. passive Twinax
- B. LC/LC OM4 optical
- C. active Twinax
- D. mini SAS
正解: C
質問 22
You have a 2-node AFF A400 serving FC LUNs. You are asked to make an instant-writable copy of a LUN in a deduplicated volume. The writable copy must not take additional space.
In this scenario, which two ONTAP features would be used? (Choose two.)
- A. clone split
- B. file clone
- C. volume clone
- D. LUN move
正解: B,C
質問 23
An administrator enabled the iSCSI protocol on an SVM and created a LUN for a VMware ESXi server.
After the administrator performs a rescan, the LUN is not visible on the host.
Which statement describes how to solve this problem?
- A. Enable ALUA support on the VMware host.
- B. Create an igroup, add the iSCSI IQN, then map the LUN to the igroup.
- C. Create an igroup, add the WWPN of the host initiator, then map the LUN to the igroup.
- D. Perform a takeover/giveback of the controller that is hosting the LUN.
正解: B
質問 24
An administrator is testing a newly deployed SAN configuration and wants to simulate a node failure by administratively taking all FC physical ports down on a node that is serving data.
In this scenario, what should the administrator observe?
- A. ANA path states change to use the direct paths of the HA partner to serve data.
- B. Host multipath drivers use any indirect path on the cluster to serve data.
- C. Host multipath drivers use the HA partner's direct paths to serve data.
- D. ALUA path states change to use the direct paths of the HA partner to serve data.
正解: B
質問 25
......
実験された試験材料はNS0-519：https://www.jpntest.com/shiken/NS0-519-mondaishu