[2023年05月] 問題集練習試験問題学習ガイドはNSE5_FCT-7.0試験合格させます
NSE5_FCT-7.0問題集には練習試験問題解答
NSE5_FCT-7.0試験に合格するためには、FortiClient EMSの展開、ポリシーおよびプロファイルの構成、エンドポイントの管理、および問題のトラブルシューティングなど、さまざまな領域での知識とスキルを証明する必要があります。この試験に合格することで、認定されたフォーティネットNSE 5 - FortiClient EMS 7.0のプロフェッショナルとなります。
質問 # 18
Which two VPN types can a FortiClient endpoint user inmate from the Windows command prompt? (Choose two)
- A. L2TP
- B. PPTP
- C. SSL VPN
- D. IPSec
正解：C、D
質問 # 19
Which two benefits are benefits of using multi-tenancy mode on FortiClient EMS? (Choose two.)
- A. It provides granular access and segmentation.
- B. Licenses are shared among sites.
- C. Separate host servers manage each site.
- D. The fabric connector must use an IP address to connect to FortiClient EMS
正解：A、C
質問 # 20
Which component or device shares device status information through ZTNA telemetry?
- A. FortiGate
- B. FortiGate Access Proxy
- C. FortiClient EMS
- D. FortiClient
正解：D
解説：
FortiClient communicates directly with FortiClient EMS to continuously share device status information through ZTNA telemetry.
質問 # 21
An administrator needs to connect FortiClient EMS as a fabric connector to FortiGate. What is the prerequisite to get FortiClient EMS to connect to FortiGate successfully?
- A. Import and verify the FortiClient client certificate on FortiGate.
- B. Import and verify the FortiClient EMS root CA certificate on FortiGate
- C. Revoke and update the FortiClient client certificate on EMS.
- D. Revoke and update the FortiClient EMS root CA.
正解：A
質問 # 22
Refer to the exhibit.
Based on the settings shown in the exhibit, which action will FortiClient take when users try to access www.facebook.com?
- A. FortiClient will allow access to Facebook
- B. FortiClient will block access to Facebook and its subdomains.
- C. FortiClient will monitor only the user's web access to the Facebook website
- D. FortiClient will prompt a warning message to warn the user before they can access the Facebook website
正解：A
質問 # 23
Refer to the exhibit.
An administrator has restored the modified XML configuration file to FortiClient and sees the error shown in the exhibit.
Based on the XML settings shown in the exhibit, what must the administrator do to resolve the issue with the XML configuration file?
- A. The administrator must save the file as FortiClient-config conf.
- B. The administrator must change the file size
- C. The administrator must resolve the XML syntax error.
- D. The administrator must use a password to decrypt the file
正解：C
質問 # 24
Refer to the exhibit.
An administrator has restored the modified XML configuration file to FortiClient and sees the error shown in the exhibit.
Based on the XML settings shown in the exhibit, what must the administrator do to resolve the issue with the XML configuration file?
- A. The administrator must save the file as FortiClient-config conf.
- B. The administrator must change the file size
- C. The administrator must resolve the XML syntax error.
- D. The administrator must use a password to decrypt the file
正解：C
質問 # 25
Refer to the exhibits.
Based on the FortiGate Security Fabric settings shown in the exhibits, what must an administrator do on the EMS server to successfully quarantine an endpoint. when it is detected as a compromised host (loC)?
- A. The administrator must enable FQDN on EMS.
- B. The administrator must enable remote HTTPS access to EMS.
- C. The administrator must authorize FortiGate on FortiAnalyzer.
- D. The administrator must enable SSH access to EMS.
正解：B
質問 # 26
Refer to the exhibit.
Based on the FortiClient logs shown in the exhibit which application is blocked by the application firewall?
- A. Twitter
- B. Facebook
- C. Internet Explorer
- D. Firefox
正解：D
質問 # 27
Refer to the exhibit.
Which shows multiple endpoint policies on FortiClient EMS.
Which policy is applied to the endpoint in the AD group trainingAD?
- A. Both the Sales and Training policies because their priority is higher than the Default policy
- B. The Training policy
- C. The Default policy because it has the highest priority
- D. The Sales policy
正解：B
質問 # 28
Refer to the exhibits.
Which show the Zero Trust Tag Monitor and the FortiClient GUI status.
Remote-Client is tagged as Remote-Users on the FortiClient EMS Zero Trust Tag Monitor.
What must an administrator do to show the tag on the FortiClient GUI?
- A. Change the FortiClient system settings to enable tag visibility
- B. Change the user identity settings to enable tag visibility
- C. Update tagging rule logic to enable tag visibility
- D. Change the endpoint control setting to enable tag visibility
正解：D
質問 # 29
Refer to the exhibit.
Based on the FortiClient log details shown in the exhibit, which two statements are true? (Choose two.)
- A. The file status is Quarantined
- B. The filename is Unconfirmed 899290 .crdownload.
- C. The file location IS \??\D:\Users\.
- D. The filename is sent to ForuSandbox for further inspection.
正解：A、B
質問 # 30
In a FortiSandbox integration, what does the remediation option do?
- A. Exclude specified files
- B. Wait for FortiSandbox results before allowing files
- C. Alert and notify only
- D. Deny access to a file when it sees no results
正解：C
質問 # 31
Which component or device shares ZTNA tag information through Security Fabric integration?
- A. FortiClient
- B. FortiGate
- C. FortiGate Access Proxy
- D. FortiClient EMS
正解：D
質問 # 32
Refer to the exhibit.
Based on the logs shown in the exhibit, why did FortiClient EMS fail to install FortiClient on the endpoint?
- A. The remote registry service is not running
- B. The FortiClient antivirus service is not running
- C. The Windows installer service is not running
- D. The task scheduler service is not running.
正解：D
質問 # 33
Which two benefits are benefits of using multi-tenancy mode on FortiClient EMS? (Choose two.)
- A. It provides granular access and segmentation.
- B. Licenses are shared among sites.
- C. Separate host servers manage each site.
- D. The fabric connector must use an IP address to connect to FortiClient EMS
正解：A、C
解説：
FCT-EMS 7,0 Page 101 : You would use multi-tenancy in an MSSP environment to conserve resources and use the same license (the total number of FortiClient licenses are shared between sites)
質問 # 34
Refer to the exhibit.
Based on the settings shown in the exhibit, which two actions must the administrator take to make the endpoint compliant? (Choose two.)
- A. Patch applications that have vulnerability rated as high or above
- B. Enable the webfilter profile
- C. Run Calculator application on the endpoint
- D. Integrate FortiSandbox for infected file analysis
正解：A、C
質問 # 35
An administrator is required to maintain a software inventory on the endpoints. without showing the feature on the FortiClient dashboard What must the administrator do to achieve this requirement?
- A. The administrator must click the hide icon on the vulnerability scan tab
- B. The administrator must select the vulnerability scan feature in the deployment package, but disable the feature on the endpoint profile
- C. The administrator must not select the vulnerability scan feature in the deployment package.
- D. The administrator must use default endpoint profile
正解：B
質問 # 36
Refer to the exhibit.
Which shows multiple endpoint policies on FortiClient EMS.
Which policy is applied to the endpoint in the AD group trainingAD?
- A. Both the Sales and Training policies because their priority is higher than the Default policy
- B. The Training policy
- C. The Default policy because it has the highest priority
- D. The Sales policy
正解：B
質問 # 37
What does FortiClient do as a fabric agent? (Choose two.)
- A. Creates dynamic policies
- B. Automates Responses
- C. Provides IOC verdicts
- D. Provides application inventory
正解：B、D
質問 # 38
Refer to the exhibits.
Which show the Zero Trust Tag Monitor and the FortiClient GUI status.
Remote-Client is tagged as Remote-Users on the FortiClient EMS Zero Trust Tag Monitor.
What must an administrator do to show the tag on the FortiClient GUI?
- A. Change the endpoint control setting to enable tag visibility
- B. Change the user identity settings to enable tag visibility
- C. Update tagging rule logic to enable tag visibility
- D. Change the FortiClient system settings to enable tag visibility
正解：D
質問 # 39
What is the function of the quick scan option on FortiClient?
- A. It performs a full system scan including all files, executable files, DLLs, and drivers for threats.
- B. It scans programs and drivers that are currently running, for threats.
- C. It scans executable files, DLLs, and drivers that are currently running, for threats.
- D. It allows users to select a specific file folder on their local hard disk drive (HDD), to scan for threats.
正解：B
質問 # 40
Which statement about FortiClient enterprise management server is true?
- A. It provides centralized management of FortiClient Android endpoints only.
- B. It provides centralized management of Chromebooks running real-time protection
- C. lt provides centralized management of multiple endpoints running FortiClient software.
- D. It provides centralized management of FortiGate devices.
正解：C
質問 # 41
......
Fortinet NSE5_FCT-7.0（Fortinet NSE 5 - FortiClient EMS 7.0）認定試験は、FortiClient EMS 7.0 ソリューションを実装および管理する知識とスキルを検証することに興味がある IT プロフェッショナル向けに設計されています。FortiClient EMS 7.0 は、組織のネットワーク内のエンドポイントに対する集中的な可視性と制御を提供する強力なエンドポイント管理システムです。この認定試験は、候補者が FortiClient EMS 7.0 を構成および展開し、その機能と機能性をトラブルシューティングおよび管理する能力をテストします。
無料NSE 5 Network Security Analyst NSE5_FCT-7.0試験問題：https://www.jpntest.com/shiken/NSE5_FCT-7.0-mondaishu