[2023年07月31日] 有効なH35-460-ENUテスト解答とHuawei H35-460-ENU試験PDF問題を試そう
実際に出るH35-460-ENU試験問題集には正確で更新された問題
質問 # 96
In the NSA Networking Option 3 series scenario, gNodeB needs to configure the S1-C interface.
- A. True
- B. False
正解：B
質問 # 97
Compared with the NSA architecture, the advantage of the SA architecture is that it can better focus on which businesses
- A. uRLLC business
- B. mMTC business
- C. Network slicing services
- D. eMBB business
正解：A、B、C
質問 # 98
On the NSA network, which of the following commands can be used to check whether the S1-U interface is normal?
- A. DSP GTPUECHO
- B. DSP SCTPLNK
- C. DSP S1INTERFACE
- D. DSP IPPATH
正解：A
質問 # 99
The DCDU-12B provides DC input to various components within the cabinet. When the number of configured RFUs exceeds the number, two DCDU-12Bs need to be configured.
- A. 0
- B. 1
- C. 2
- D. 1 pcs
正解：C
質問 # 100
Log in to the CPE Pro management page, and directly use the "Delete" function to delete the currently activated APN on the "APN Management" management interface
- A. Correct
- B. Errors
正解：B
質問 # 101
Before using U2020 remote NR base station commissioning, which of the following tasks must be prepared?
- A. The physical transport network is in place
- B. The plug and play function of U2020 is turned on
- C. Base station DHCP service is enabled
- D. Manually configure the IP address of the base station
正解：A、B、C
質問 # 102
The next board supports software reset?
- A. FAN
- B. UPEU
- C. GDP
- D. USCU
正解：C
質問 # 103
The gNodeB alarm level includes emergency alarms, important alarms, secondary alarms, and prompt alarms. The alarm level cannot be changed.
- A. True
- B. False
正解：B
質問 # 104
Which of the following is not a BBU veneer?
- A. UPEUe
- B. CMUH
- C. UBBPfw1
- D. URI Ub
正解：D
質問 # 105
In the NSA network test using Probe, it was found that the MAC layer rate of LTE upstream is 20Mbps, but the PDCP layer rate is 0
- A. Tool statistical anomalies
- B. The bit error is too high, and the data is heavy
- C. PDCP layer failure
- D. LTE data is aggregated into the PDCP layer of NR
正解：D
質問 # 106
UMPT single board completes signaling processing, operation and maintenance, transmission clock extraction, channel coding and other functions.
- A. True
- B. False
正解：B
質問 # 107
When the gNodeB is planned to have multiple IP addresses and the next hop address is different, which of the following routing configurations is more suitable?
- A. Destination address routing configuration
- B. Direct routing configuration
- C. Source address routing configuration
正解：A
質問 # 108
The CPE Pro admin page supports multiple users logging in at the same time.
- A. Errors
- B. Correct
正解：B
質問 # 109
AAU/RRU and BBU fronthaul fiber is less than 100 meters, mostly used in CRAN centralized site solutions.
- A. Correct
- B. Errors
正解：B
質問 # 110
Which is the largest MIMO method supported by the 5G Indoor CPE design?
- A. 4T8R
- B. 2T2R
- C. 4T4R
- D. 2T4R
正解：C
質問 # 111
Which of the following two cells has a large interference from PBCH?
- A. PCI0 and PCI3
- B. PCI0 and PCI2
- C. PCI0 and PCI4
- D. PCI0 and PCI1
正解：C
質問 # 112
Which device makes the judgment on the change of auxiliary station under the NSA architecture?
- A. MRS
- B. T-SgNodeB
- C. MeNodeB
- D. S-SgNodeB
正解：D
質問 # 113
What configuration modules does the gNodeB wireless data configuration include? (Multiple choice)
- A. Configure the neighboring area
- B. Configure the community
- C. Configure the sector
- D. Configure the antenna
正解：A、B、C
質問 # 114
Which of the following command objects must be configured in the 5G RAN2.0 gNodeB Wireless Data Module?
- A. SECTOREQM
- B. NRDUCELL
- C. NRCELL
- D. GNBDU
正解：A、B、C
質問 # 115
Which entity is the RLC layer used for detection and error correction?
- A. UM entity
- B. TM entity
- C. AM entity
- D. MAC entity
正解：C
質問 # 116
What data configuration tools can gNodeb use to complete the site opening?
- A. LMT
- B. US
- C. CME
- D. MaOS
正解：A、B、C
質問 # 117
......
H35-460-ENU試験問題集でPDF問題とテストエンジン：https://www.jpntest.com/shiken/H35-460-ENU-mondaishu
H35-460-ENU問題集で必ず合格させる試験：https://drive.google.com/open?id=1zMLFmd2mpX9v3TNHB3TtUOmHksSGtQGs