[2023年10月30日] OmniStudio-Developer PDF問題集にはあなたに不可欠なOmniStudio-Developer試験解答を合格に繋ぐ！
OmniStudio-DeveloperPDF解答で完璧な予見OmniStudio-Developer練習試験問題
Salesforce Omnistudio-Developer試験は、SalesforceプラットフォームとOmnistudioを確実に理解する必要がある挑戦的な認証です。この試験は、105分以内に完了する必要がある60の複数選択質問で構成されています。この質問は、Apexプログラミング、データモデリング、ユーザーインターフェイス設計など、Salesforce開発のさまざまな側面に関する候補者の理解をテストするように設計されています。
Salesforce OmniStudio Developer認定試験は、Salesforceプラットフォームを使用して統合された、拡張性の高い、効率的なソリューションを構築するために必要なスキルと知識を検証するために設計されています。認定試験は、Salesforce OmniStudioプラットフォームを使用してカスタムアプリケーションを構築、設定、展開し、データセキュリティと業界標準のコンプライアンスを確保する候補者の熟練度をテストします。Salesforce OmniStudio Developer認定は、Salesforceプラットフォームで作業する開発者、アーキテクト、コンサルタントに最適であり、エンドツーエンドのソリューション構築のスキルを向上させたい人に適しています。
質問 # 46
A company wants to allow agents to send customers a quote for signature. The quote is a documents created using a DocuSign template that has been prefilled with all of the quote details. The document will be emailed to one or more recipients for signature.
How should a developer configure this functionality in an OmniScript?
- A. Email Action
- B. DocuSign Envelope Action
- C. DocuSign Signature Action
- D. PDF Acwm
正解：C
質問 # 47
An integration procedure contains a Remote Action element that calls a method of an APEX class. The method requires two fields are input: Accountid and ProductId. The integration Procedure data JSON contains the following nodes:
How should the Remote Action element be configured to pass the data correctly to the method?
- A. Check the DataRaptor Transform checkbox, and add the following Key/Value pairs to Output JSON Path:
- B. Set Return Only Additional Output to true, and add the following Key/Value pairs to additional input.
- C. Check the Send Only Additional Input checkbox, and the following/ value pairs to Additional input:
- D. Add the following to Send JSON Path: accountId: %Accountd% ProductId% Details Products%
正解：B
質問 # 48
On a FlexCard canvas, several fields display with Salesforce data, but one of the fields shows only the label.
What could cause this?
- A. There are No test Data test Parameters configured.
- B. The field name in the FlexCard state does not match the DataRaptorExtract's Output JSON Path name.
- C. In the Setup Pabel, {recordId} is misspelled in the Data Source Input Map.
- D. In the FlexCard state, the Field type for the field does not match the type in the Salesforce record.
正解：B
解説：
Explanation
According to the FlexCard Designer Overview page, one possible cause of a field showing only the label is that "the field name in the FlexCard state does not match the DataRaptor Extract's Output JSON Path name".
質問 # 49
What two advantages does a DataRaptor Turbo Extract have over a standard DataRaptor Extract?
Choose 2 answers
- A. It has better performance at runtime
- B. It supports complex field mappings
- C. It is easier to configure
- D. It populates data in PDF and DocuSign format
正解：A、C
質問 # 50
Which context variable is set in the card designer and allows access to any property in scope plus the {{payload}} variable?
- A. Attributes {{attrs}}
- B. Session variables {{session}}
- C. Object {{objj}}
- D. Page parameters {{params}}
正解：B
質問 # 51
Refer to the exhibit below. What JSON from the DRGetContactDeteils action would display all six values correctly in the shown? BlkCases is a Repeat Block, and the names of the elements are the same as the label names without spaces.
A)
B)
C)
D)
- A. Option A
- B. Option B
- C. Option D
- D. Option C
正解：A
質問 # 52
How can a Card Layout be embedded within another Card?
- A. Use a card state with a Layout condition
- B. Use an angular filter in a specific field in a card state
- C. Use the Add Layout button in zone layout
- D. Use a session variable on a Card
正解：C
質問 # 53
A developer creates an Integration Procedure with a Set Values and a DataRaptor Extract Action that requires AccountId as a key. When the developer previews the Integration Procedure, thedeveloper enters the AccountId correctly and execute the Preview. The developer sees the data extract by the DataRaptor in the Debug Log, but the response is empty.
What is the likely cause of this issue?
- A. The DataRaptor Action did not have the add response Ro Response JSON property set to true.
- B. The Response cannot be previewed directly.
- C. A Response Action was not added to the integration Procedure.
- D. The AccountId used for the preview is invalid.
正解：C
解説：
Explanation
According to the OmniStudio Developer Guide, "To return a response from an Integration Procedure, add a Response action as the last action in your Integration Procedure." Therefore, the correct answer is C.
質問 # 54
A company wants to allow agents to send customers a quote for signature. The quote is adocument createdusing a DocuSign template that has been prefilled with all of the quote details. The document will be emailed to one or more recipients for signature.
How should a developer configure this functionality in OmniScript?
- A. Email Action
- B. DocuSign Signature Action
- C. DocuSign Envelope Action
- D. PDF Acwm
正解：C
解説：
Explanation
A DocuSign Envelope Action can be used to create and send a document for signature using a DocuSign template. The developer can specify the template ID, recipient details, and prefill data in the action configuration
質問 # 55
Refer to the exhibit.
What JSON code correct represent the step in the OmniScript Structure panel shown?
A)
B)
C)
D)
- A. Option B
- B. Option D
- C. Option A
- D. Option C
正解：D
質問 # 56
In an OmnoScript, a developer needs to configure a Disclosure element to require user input only if the user already checked a Non-Disclosure Agreement Checkbox.
How should the developer configure the conditional view to meet this requirement?
- A. Show element if true
- B. Disable read only if true
- C. Set element to optional if false
- D. Set element to require if true
正解：B
質問 # 57
Refer to the exhibit below. A developer has configured an integration Procedure element with Additional input.
Alternatively, how could the developer configure SEND/RESPONSE TRNSFORMATION to send exactly the same data? Assume the developer has un-checked Send Only Additional input.
- A.
- B.
- C.
- D.
正解：C
質問 # 58
Refer to the exhibit.
The card layout uses an integration Procedure as a data source. The cards use the layout data source.
Which JSON data structure supports this card layout and follows best practices?
A)
B)
C)
- A. Option B
- B. Option A
- C. Option C
正解：C
質問 # 59
A developer is creating an OmniScript that provisions trail orgs to their customers. The following text block in the Omniscript uses a merge code to display the ID for the new trail org:
- A. To %sDetails: Customer|0: ID$
- B. To %Details: Customer|n: ID%
- C. To %%sDetails: Customer|0: ID%%
- D. To %Details: Customer|1: ID%
正解：D
質問 # 60
While using the Lightning App Builder, you add a Custom Component to the console, but the component you want to add does not appearin the dropdown list.
What could cause this?
- A. The FlexCard has a recordid that is for the wrong record type.
- B. The FlexCard does not have an active version.
- C. The record displayed in the Lightning App Builder preview has no data for the record displayed.
- D. The data source for the FlexCard is not active.
正解：B
質問 # 61
......
OmniStudio-Developerリアル試験問題と正確なSalesforce Certified OmniStudio DeveloperPDF解答：https://www.jpntest.com/shiken/OmniStudio-Developer-mondaishu
リアルSalesforce試験の素晴らしい練習問題集でOmniStudio-Developer試験：https://drive.google.com/open?id=1jmL-NF-BtQhfze9GMJxyjI3lgfdR8NOh