[2024年08月15日]C_S43_2022認定ガイド問題と解答トレーニング
C_S43_2022認定お試しセット最新C_S43_2022のPDF問題集
SAP C_S43_2022 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
質問 # 42
You want to set up a general maintenance task list for inspection rounds using the overall time confirmation as a simplified way to record measurement documents. What do you need to do? Note: There are 2 correct answers to this question
- A. Assign a piece of equipment with an allocated measuring point to a task list operation
- B. Assign an inspection lot to the task list header
- C. Assign a measuring point as a production resources/tools (PRT) to a task list operation.
- D. Assign an inspection document as a PRT to the task list operation.
正解：A、C
解説：
Explanation
To set up a general maintenance task list for inspection rounds using the overall time confirmation as a simplified way to record measurement documents, you need to do the following steps:
Assign a piece of equipment with an allocated measuring point to a task list operation. This will allow you to inspect the equipment and record the measurement readings for the measuring point during the inspection round. You can assign the equipment either manually or automatically using the object list in the task list header1.
Assign a measuring point as a production resources/tools (PRT) to a task list operation. This will allow you to inspect the measuring point and record the measurement readings for it during the inspection round. You can assign the measuring point either manually or automatically using the PRT category
0010 (Measuring Point) in the task list operation1.
You do not need to assign an inspection lot to the task list header, as this is not required for inspection rounds. Inspection lots are used for quality inspections that are triggered by events such as goods receipt, production order, or sales order2.
You do not need to assign an inspection document as a PRT to the task list operation, as this is not supported for inspection rounds. Inspection documents are used for quality inspections that are based on inspection plans and inspection characteristics2. References: PM - General maintenance task list and Set up your SAP S/4HANA system for EAM Inspection Checklists in SAP Help Portal.
質問 # 43
You want to set up a general maintenance task list for inspection rounds using the overall time confirmation as a simplified way to record measurement documents. What do you need to do? Note: There are 2 correct answers to this question
- A. Assign a piece of equipment with an allocated measuring point to a task list operation
- B. Assign an inspection lot to the task list header
- C. Assign a measuring point as a production resources/tools (PRT) to a task list operation.
- D. Assign an inspection document as a PRT to the task list operation.
正解：A、C
解説：
To set up a general maintenance task list for inspection rounds using the overall time confirmation as a simplified way to record measurement documents, you need to do the following steps:
Assign a piece of equipment with an allocated measuring point to a task list operation. This will allow you to inspect the equipment and record the measurement readings for the measuring point during the inspection round. You can assign the equipment either manually or automatically using the object list in the task list header1.
Assign a measuring point as a production resources/tools (PRT) to a task list operation. This will allow you to inspect the measuring point and record the measurement readings for it during the inspection round. You can assign the measuring point either manually or automatically using the PRT category 0010 (Measuring Point) in the task list operation1.
You do not need to assign an inspection lot to the task list header, as this is not required for inspection rounds. Inspection lots are used for quality inspections that are triggered by events such as goods receipt, production order, or sales order2.
You do not need to assign an inspection document as a PRT to the task list operation, as this is not supported for inspection rounds. Inspection documents are used for quality inspections that are based on inspection plans and inspection characteristics2. References: PM - General maintenance task list and Set up your SAP S/4HANA system for EAM Inspection Checklists in SAP Help Portal.
質問 # 44
You want to have several plan dates calculated in a maintenance plan.Which scheduling parameter do you use?
- A. Scheduling indicator
- B. Scheduling period
- C. End Date for Scheduling
- D. Call horizon
正解：B
解説：
To have several plan dates calculated in a maintenance plan, you use the scheduling period parameter. The scheduling period defines the time interval for which the system calculates the planned dates for the maintenance plan. For example, if you enter 12 months as the scheduling period, the system calculates the planned dates for the next 12 months from the current date. You can also specify the end date for scheduling, which is the last date for which the system calculates the planned dates. The scheduling indicator determines how the system calculates the planned dates based on the cycle, the shift factor, and the tolerance. The call horizon defines the percentage of the cycle that must be expired before the system generates a call object (such as a maintenance order or notification) for the planned date.
質問 # 45
Which steps are available for the maintenance technician when using the Report Malfunction bile? Note:
There are 3 correct answers to this question.
- A. Select and print the maintenance order shop papers
- B. Input estimated costs for repair malfunction
- C. Display the current location of the technical object
- D. Add a URL to provide further information
- E. View details of the technical object by navigating to the Asset Viewer
正解：C、D、E
解説：
Explanation
The Report Malfunction app allows the maintenance technician to perform the following steps when reporting a malfunction of a technical object:
Display the current location of the technical object. The app shows the geographical location of the technical object on a map, if the Geographical Enablement Framework is activated. This helps the technician to locate the technical object and plan the travel route1 Add a URL to provide further information. The app allows the technician to attach a URL to the malfunction report, such as a link to a video or a website that shows the problem orthe solution. This helps the technician to provide additional information and documentation for the malfunction1 View details of the technical object by navigating to the Asset Viewer. The app allows the technician to access the Asset Viewer app from the malfunction report, where they can view the technical object details, such as the structure, documents, history, and measurements. This helps the technician to gather information about the technical object and its condition1 The Report Malfunction app does not allow the maintenance technician to perform the following steps when reporting a malfunction of a technical object:
Select and print the maintenance order shop papers. The app does not provide the option to select and print the maintenance order shop papers. The technician can use a different app, such as "Manage Maintenance Orders", to print the shop papers2 Input estimated costs for repair malfunction. The app does not provide the option to input estimated costs for repair malfunction. The technician can use a different app, such as "Manage Maintenance Orders", to enter the planned costs for the maintenance order2 References: 1: Report and Repair Malfunction | SAP Help Portal 2: Manage Maintenance Orders | SAP Help Portal
質問 # 46
Which SAP UI technology is used for the Report and Repair Malfunction app?
- A. SAP GUI for HTML
- B. Business Server Pages
- C. SAPUI5
- D. Web Dynpro
正解：C
質問 # 47
What is a characteristic of the SAP Fiori tile group? Note: There are 2 correct answers to this question?
- A. It is based on an SAP Fiori tile catalog.
- B. It can be assigned directly to the user via personalization
- C. It provides only HTML5-based apps
- D. It is assigned via a portal role.
正解：A、B
解説：
A SAP Fiori tile group is a subset of apps from one or more catalogs that are displayed on the user's entry page of the SAP Fiori launchpad1. A tile group has the following characteristics:
It is based on an SAP Fiori tile catalog. A catalog is a logical group of apps or tiles that defines the set of all tiles that users can use to personalize the home page2. A group can contain apps from different catalogs, depending on the user's role and authorization1.
It can be assigned directly to the user via personalization. The user can personalize the entry page by adding or removing apps to pre-delivered groups or self-defined groups2. The user can also reorder the groups and tiles according to their preference1.
It does not provide only HTML5-based apps. A tile group can contain apps that are based on different technologies, such as SAPUI5, Web Dynpro ABAP, or SAP GUI transactions1.
It is not assigned via a portal role. A tile group is assigned to the user's role via the SAP Role Maintenance transaction PFCG2. A portal role is a different concept that is used in the SAP Enterprise Portal to define the access rights and content for portal users.
References: Configure the Fiori Launchpad Tiles using Catalogs & Groups, Setup of Catalogs, Groups, and Roles in the SAP Fiori Launchpad, [Portal Roles]
質問 # 48
Which of the following are components of cloud-based SAP Intelligent Asset Management? Note: There are 2 correct answers to this question
- A. Worker Safety applications
- B. SAP Asset Performance Management
- C. SAP Work Manager
- D. SAP Service and Asset Manager (formerly SAP Asset Manager)
正解：B、D
解説：
SAP Intelligent Asset Management is a cloud-based solution that comprises of five components1:
SAP Asset Intelligence Network: A central repository for asset information that facilitates collaborative asset management and leverages the Internet of Things (IoT).
SAP Predictive Maintenance and Service: A tool that combines sensor and business data, machine learning, and engineering simulations to optimize asset performance and reduce downtimes.
SAP Asset Strategy and Performance Management: A tool that measures and improves asset performance and enhances maintenance strategies.
SAP Predictive Engineering Insights: A tool that uses digital twin technologies and finite element analysis to monitor asset health and predict failures.
SAP Service and Asset Manager (formerly SAP Asset Manager): A mobile app that provides online and offline access to asset management processes and data.
Among the given options, only B and D are components of SAP Intelligent Asset Management. A and C are not part of the cloud-based solution, but rather standalone applications that can be integrated with SAP S/4HANA Asset Management or other SAP solutions. References: 1: This Article Introduces SAP Intelligent Asset Management
質問 # 49
What are the prerequisites for serializing a piece of equipment? Note: There are 3 correct answers to this question
- A. Assign a serial number profile to the related material master.
- B. Assign a serial number profile to an additional business view for equipment category
- C. Assign a serial number profile to the equipment category
- D. Maintain a serial number for an existing equipment master.
- E. Add a serialized material to the equipment serial data view.
正解：A、C、D
解説：
Serializing a piece of equipment means assigning a unique serial number to identify and track the equipment throughout its lifecycle. The prerequisites for serializing a piece of equipment are:
Assign a serial number profile to the equipment category. This defines the rules for creating and managing serial numbers for the equipment, such as the number range, the check digit, and the serial number usage. The serial number profile is assigned in the Customizing activity Define Equipment Categories under Plant Maintenance and Customer Service -> Master Data in Plant Maintenance and Customer Service -> Technical Objects -> Equipment -> Equipment Categories.
Assign a serial number profile to the related material master. This ensures that the material and the equipment have the same serial number profile and that the serial number is automatically copied from the material to the equipment. The serial number profile is assigned in the material master data in the Plant Data/Stor. 1 view under Serial Number Profile.
Maintain a serial number for an existing equipment master. This can be done either manually or automatically. Manually, you can enter the serial number in the equipment master data in the Serial Data view under Serial Number. Automatically, you can link the equipment with a serialized material and the serial number will be copied from the material to the equipment. This linking can be done either with a goods movement or manually.
The options that are not prerequisites for serializing a piece of equipment are:
Add a serialized material to the equipment serial data view. This is not a prerequisite, but rather a possible way to link the equipment with a serialized material and copy the serial number from the material to the equipment. However, this can only be done if the serial number profile is already assigned to both the equipment category and the material master.
Assign a serial number profile to an additional business view for equipment category. This is not a valid option, as the serial number profile is assigned to the equipment category itself, not to any additional business view.
References:
Serial Number Management
Explaining Refurbishment of Spare Parts
質問 # 50
To which objects can a personnel number be directly assigned? Note: There are 2 correct answers to this question?
- A. Planner group
- B. Business partner
- C. Maintenance plan
- D. Work center
正解：B、D
解説：
A personnel number is a unique identifier for an employee in the SAP system. A personnel number can be directly assigned to the following objects:
C: Work center. A work center is a location where maintenance activities are performed. A work center can have one or more personnel numbers assigned to it, which represent the employees who work at that location. The personnel numbers can be used for capacity planning, scheduling, and confirmation of maintenance orders1.
D: Business partner. A business partner is a person or an organization that has a business relationship with the company. A business partner can have one or more roles, such as customer, vendor, or contact person. A personnel number can be assigned to a business partner role, which allows the system to identify the employee who is responsible for the business partner or who acts as a contact person for the business partner2.A personnel number cannot be directly assigned to the following objects:
A: Planner group. A planner group is a group of employees who are responsible for planning and processing maintenance orders. A planner group is assigned to a maintenance order header, but not to a personnel number. A planner group can have one or more work centers assigned to it, which in turn can have personnel numbers assigned to them3.
B: Maintenance plan. A maintenance plan is a document that defines the frequency and scope of preventive maintenance activities for technical objects. A maintenance plan is assigned to a maintenance item, which contains the technical object and the task list for the maintenance activities. A maintenance plan does not have a direct assignment to a personnel number, but it can have a planner group assigned to it, which can have work centers and personnel numbers assigned to it. References: 1: Work Center 2: Business Partner 3: Planner Group : [Maintenance Plan]
質問 # 51
You want to set up a scenario for regular maintenance. The first event should take place after 1 year, after that, it is a regular cycle of 6 months. Which parameter do you have to use to map this in the system?
- A. Scheduling indicator
- B. Maintenance package offset
- C. Cycle modification factor
- D. Package hierarchy
正解：B
解説：
Explanation
To set up a scenario for regular maintenance, the first event should take place after 1 year, and after that, it is a regular cycle of 6 months, you have to use the maintenance package offset parameter to map this in the system. The maintenance package offset is used to define the time interval between the start of the maintenance plan and the first call date of the maintenance package1. A maintenance package is a set of data that defines the frequency and scope of the maintenance tasks2.
For example, if you want to create a maintenance plan with two maintenance packages, one for annual inspection and one for semi-annual inspection, you can use the following settings:
Maintenance package 1: Cycle length = 12 months, Offset = 0 months, Scheduling indicator = Time-based Maintenance package 2: Cycle length = 6 months, Offset = 12 months, Scheduling indicator = Time-based This means that the first maintenance package will be called at the start of the maintenance plan, and then every 12 months thereafter. The second maintenance package will be called after 12 months from the start of the maintenance plan, and then every 6 months thereafter.
The other parameters that are not relevant for this scenario are:
Package hierarchy: This is used to define the relationship between different maintenance packages within a maintenance plan. It allows you to create nested or parallel maintenance packages that are dependent on each other3.
Scheduling indicator: This is used to define the type of scheduling for the maintenance package, such as time-based, performance-based, or condition-based4.
Cycle modification factor: This is used to modify the cycle length of the maintenance package by a certain percentage or factor5.
References: 1: SAP Help Portal - Maintenance Package Offset 2: SAP Help Portal - Maintenance Package 3: SAP Help Portal - Package Hierarchy 4: SAP Help Portal - Scheduling Indicator 5: SAPHelp Portal - Cycle Modification Factor
質問 # 52
Which are the prerequisites for Inspection Checklist Processing? Note: There are 2 correct answers to this question
- A. Inspection point type assigned to the task list header
- B. QM inspection plan with assigned inspection characteristics
- C. Master inspection characteristics assigned to PM task list operations
- D. Classification data assigned to a technical object
正解：B、D
解説：
This is required to define the inspection scope and the checklist type for the technical object. The inspection plan must be classified with the same class as the technical object and have matching characteristic values1.
Classification data assigned to a technical object: This is required to identify the relevant inspection plan and checklist type for the technical object. The technical object must be classified with the same class as the inspection plan and have matching characteristic values1.
The other options are not correct because:
Inspection point type assigned to the task list header: This is not a prerequisite for inspection checklist processing, but an optional setting that allows the user to define inspection points for the checklist items2.
Master inspection characteristics assigned to PM task list operations: This is not a prerequisite for inspection checklist processing, but an optional setting that allows the user to use master inspection characteristics as checklist items2.
Reference:
1: Explaining Inspection Checklists - SAP Learning 2: Generating Inspection Checklists | SAP Help Portal
質問 # 53
You want to schedule a performance-based maintenance plan. Which parameters are mandatory? Note: There are 2 correct answers to this question
- A. Counter overflow reading
- B. Start counter reading
- C. Scheduling period
- D. Estimated annual performance
正解：B、D
解説：
Explanation
To schedule a performance-based maintenance plan, you need to specify the start counter reading and the estimated annual performance of the equipment or functional location. The start counter reading is the initial value of the counter assigned to the maintenance plan. The estimated annual performance is the expected value of the counter for one year. These parameters are used to calculate the maintenance cycle and the due date for the maintenance plan. The scheduling period and the counter overflow reading are optional
質問 # 54
What do you have to consider when planning maintenance work that is to be carried out by an external company?
- A. In the control key assigned to the order operation, the "Service" indicator must always be activated.
- B. If you assign a control key with indicator "Service" for an external service, you have to enter the actual values via the service entry sheet.
- C. For the maintenance order type, you have to assign the Enhanced Procurement Mode.
- D. If you assign a control key for an external order operation, the actual values must always be entered as a goods receipt in the system.
正解：A
質問 # 55
What are characteristics of the Preparation and Scheduling phase within phase-based maintenance? Note: There are 2 correct answers to this question
- A. If you use the Resource Scheduling apps, you always dispatch orders and operations.
- B. The configuration of the order type decides whether you use Resource Scheduling or not.
- C. Maintenance Planning Buckets give you a list of non-approved notifications
- D. The order moves to the Preparation phase once it is approved and released
正解：B、D
解説：
The Preparation and Scheduling phase within phase-based maintenance is the phase where the maintenance planner divides the maintenance effort into manageable groups, levels out the workload over several weeks, determines the concrete time period for the requested maintenance work, and checks the availability of all the resources, spare parts and services needed1.
Option B (The order moves to the Preparation phase once it is approved and released) is correct, because the approval and release of the order is the last step of the previous phase (Approval phase)2. Once the order is approved and released, it is ready for preparation and scheduling.
Option D (The configuration of the order type decides whether you use Resource Scheduling or not) is also correct, because the order type determines whether the order is relevant for resource scheduling or not2. Resource scheduling is an optional step in the Preparation and Scheduling phase, where the planner can assign and dispatch the orders and operations to the technicians using the Resource Scheduling apps2.
Option A (If you use the Resource Scheduling apps, you always dispatch orders and operations) is incorrect, because the Resource Scheduling apps allow the planner to either dispatch or assign the orders and operations2. Dispatching means that the planner assigns a specific technician and a specific time slot for the order or operation, while assigning means that the planner assigns only a technician or a team, but not a specific time slot2.
Option C (Maintenance Planning Buckets give you a list of non-approved notifications) is also incorrect, because the Maintenance Planning Buckets app gives the planner a list of approved and released orders that are ready for preparation and scheduling2. The non-approved notifications are handled in the previous phase (Screening phase)2.
Reference:
Phase Model for the Maintenance Process
New Phase Model for the Maintenance Processes in S/4HANA Cloud
Explaining the Phase-based Process
Maintenance Process Phases
質問 # 56
How does the work center influence cost calculation in the maintenance order? Note: There are 2 correct answers to this question
- A. Via organizational unit and personal hourly rate
- B. Via cost center and activity type
- C. Via activity type and hourly rate
- D. Via cost center assigned to a personnel number
正解：B、C
質問 # 57
How do you set up the visible tiles for a specific user in SAP Fiori Launchpad? Note: There are 2 correct answers to this question
- A. By assigning a PFCG role with an SAP Fiori catalog
- B. By assigning a PFCG role with an SAP Fiori tile group
- C. By assigning the tiles directly
- D. By assigning a portal role with an SAP Fiori catalog
正解：A、B
解説：
Explanation
The visible tiles for a specific user in SAP Fiori Launchpad are determined by the PFCG roles that are assigned to the user. The PFCG roles contain the SAP Fiori catalogs and tile groups that define the available and visible tiles for the user.
The steps to set up the visible tiles for a specific user are:
Create or use an existing PFCG role in the backend system that contains the SAP Fiori catalogs and tile groups that are relevant for the user. The catalogs and tile groups can be created or copied from the SAP Fiori Launchpad Designer app. The catalogs contain the tiles and target mappings that represent the apps that can be launched from the launchpad. The tile groups are collections of tiles that are displayed on the launchpad home page.
Assign the PFCG role to the user in the backend system. The user can have multiple PFCG roles assigned, depending on their business needs and authorizations.
Log on to the SAP Fiori Launchpad with the user credentials. The user will see the tiles that are assigned to them through the PFCG roles on the launchpad home page. The user can also personalize the launchpad by adding, removing, or rearranging the tiles and groups.
The other options are incorrect because:
Portal roles are not used to assign SAP Fiori catalogs and tile groups. Portal roles are used to assign portal content, such as iViews and pages, to users in the SAP Enterprise Portal.
Assigning the tiles directly to the user is not possible. The tiles are part of the catalogs and tile groups that are assigned to the user through the PFCG roles.
References:
Setting Up Launchpad Content | SAP Help Portal
Creating and Configuring Tiles | SAP Help Portal
SAP Fiori Launchpad Tiles Setup - Go Coding
How to create Fiori Catalog, Group and custom Fiori tiles
質問 # 58
Which of these are necessary steps of the Inspection Checklist process? Note: There are 2 correct answers to this question
- A. Record the usage decision for an Inspection Lot
- B. Generate Inspection Lots assigned to maintenance order headers.
- C. Generate Inspection Lols within the checklists view.
- D. Link PM task list with assigned inspection point type to a maintenance item.
正解：A、B
質問 # 59
Which views can you assign to an equipment category via a view profile? Note: There are 2 correct answers to this question?
- A. Manufacturer data
- B. Serial data
- C. Warranty
- D. Configuration
正解：A、C
解説：
An equipment category defines the technical characteristics of an equipment and the views that are available for it. A view profile is a set of views that can be assigned to an equipment category. The views that can be assigned to an equipment category via a view profile are:
Basic data
Classification
Location
Organization
Partner
Status
Structure
Warranty
Manufacturer data
Measurement document
History
Permits
Documents
User fields
Serial data
Configuration
Object links
Time-dependent data
Linear data
Geographical data
Maintenance plan
Maintenance item
Maintenance task list
Maintenance order
Maintenance notification
Service order
Service notification
Service contract
Service confirmation
Service quotation
Service request
Service plan
Service item
Service task list
Service product
Service product allocation
Service product structure
Service product location
Service product partner
Service product status
Service product classification
Service product documents
Service product permits
Service product user fields
Service product serial data
Service product configuration
Service product object links
Service product time-dependent data
Service product linear data
Service product geographical data
Among these views, the ones that match the options given in the question are Warranty and Manufacturer data. Therefore, the correct answers are A and D.
Reference:
SAP Help Portal - Equipment Category
SAP Help Portal - View Profile
質問 # 60
Which of the below objects can you assign in a notification item? Note: There are 2 correct answers to this question
- A. One or more causes of damage.
- B. Only one object part
- C. Only one cause of damage
- D. One or more object parts
正解：A、D
解説：
A notification item is used to describe a problem, damage, or the activity executed in greater detail. A notification item can be assigned to one or more object parts and one or more causes of damage. An object part is a component of a technical object that is affected by a malfunction or damage. A cause of damage is a factor that leads to a malfunction or damage. You can use catalogs to enter object parts and causes of damage in a coded form. Therefore, the correct answers are B and D.
References:
SAP Help Portal - Notification Item
SAP Help Portal - Object Part
SAP Help Portal - Cause of Damage
[SAP Learning - Creating Notifications]
質問 # 61
What is characteristic for a maintenance order with status REL- if you also consider the capabilities of business functions? Note: There are 3 correct answers to this question.
- A. The planner can change estimated costs only at the header level
- B. Goods receipts for external services can be entered.
- C. The controller can determine actual cost surcharges.
- D. The assignment of the notification to the maintenance order header cannot be deleted.
- E. The planner can change planned costs at the operation level
正解：B、C、E
質問 # 62
......
ベストSAP C_S43_2022学習ガイドと問題集は2024：https://www.jpntest.com/shiken/C_S43_2022-mondaishu
トップクラスSAP C_S43_2022試験最先端学習ガイド！練習問題バージョン：https://drive.google.com/open?id=101e76DjhBxUAL6nwo3BM7Q0-Jd5Pf9-F