[2024年11月09日] 合格させるEMC D-PDD-DY-23試験情報と無料練習テスト
D-PDD-DY-23試験問題集PDF更新された問題集にはJPNTest試験合格保証付き
質問 # 88
When the PowerProtect DD system boots up for the first time, the CLI configuration wizard script does not start automatically.
Which command can be used to start the script manually?
- A. configure terminal
- B. config wizard
- C. setup config
- D. config setup
正解：D
質問 # 89
What happens to the data when it is moved from the active tier to cloud tier?
- A. It is compressed and stored as object storage in a new format
- B. It is deduplicated and stored in object storage the native format
- C. It is compressed and stored in block storage in a new format
- D. It is deduplicated and stored in a file system in the native format
正解：B
質問 # 90
When following Dell recommendations what adjustments should a customer make on the Microsoft Windows client when using CIFS on a PowerProtect DD appliance?
- A. Adjust session timeout values and TCP/IP parameters.
- B. Adjust NTP parameters and SNMP parameters.
- C. Adjust SNMP parameters and TCP/IP parameters.
- D. Adjust session timeout values and SNMP parameters.
正解：A
質問 # 91
What are some possible network bottlenecks for a PowerProtect DD?
- A. Routing protocols, switches and routers, and wire speeds
- B. Configuration, wire speeds, switches and routers
- C. Connectivity, routing protocols, and configuration
- D. Connectivity, firewalls, and routing protocols
正解：A
質問 # 92
In PowerProtect DD, in which folder are core files, logfiles, and upgrade packages located?
- A. /backup
- B. /var
- C. /data/col1
- D. /ddvar
正解：D
質問 # 93
With DSP enabled on a PowerProtect DD appliance, which functions are performed on the backup host?
- A. Segmenting fingerprinting, and sending the fingerprints
- B. Sending the data, segmenting, and compressing
- C. Recording references to previous data and segmenting
- D. Compressing segmenting, and fingerprinting
正解：A
質問 # 94
Which types of replication are supported in a PowerProtect DD appliance?
- A. Collection, Directory, MTree, Pool, and Managed File
- B. Synchronous, Collection, MTree, Managed File, and Directory
- C. MTree, Collection, and Directory only
- D. Asynchronous, Collection, Directory, and MTree
正解：C
質問 # 95
Where can the serial number on a PowerProtect DD appliance be found?
- A. Label on the top of the chassis
- B. PSNT tag at the rear of the system
- C. Label attached to the bezel
- D. Right side of the chassis
正解：B
質問 # 96
Which two applications use the client direct feature? (Select 2)
- A. Avamar
- B. IBM Spectrum Protect
- C. Dell NetWorker
- D. Veritas Backup Exec
正解：A、C
質問 # 97
What type of replication does DDVE support?
- A. Collection, Managed File, and MTree
- B. Managed File and MTree
- C. Directory and Managed File
- D. MTree, Directory, and Managed File
正解：B
質問 # 98
A PowerProtect DD appliance with two expansion shelves is being installed in a customer-provided rack.
When cabling the controller to the shelves, what is connected to the host port on the last shelf in the chain?
- A. Expansion port of the controller
- B. Host port of the downstream shelf
- C. Host port of the controller
- D. Expansion port of the upstream shelf
正解：D
質問 # 99
What are the terminal emulation settings that are used to establish serial communication with a PowerProtect DD system?
- A. BAUD Rate: 115200
Data Bits: 1
Stop Bits: 2
Parity: None
Flow Control: None - B. BAUD Rate: 116200
Data Bits: 1
Stop Bits: 2
Parity: Odd
Flow Control: Xon/XOFF - C. BAUD Rate: 115200
Data Bits: 8
Stop Bits: 1
Parity: None
Flow Control: None - D. BAUD Rate: 116200
Data Bits: 8
Stop Bits: 1
Parity: Even
Flow Control: Xon/XOFF
正解：C
質問 # 100
What does the system setup wizard require to set up a VTL on a PowerProtect DD system?
- A. WWPNs
- B. Gateway IP
- C. HBA
- D. DHCP
正解：A
質問 # 101
An administrator is configuring an Azure cloud unit on their DD6900.
Which certificate must be imported before adding the cloud unit?
- A. S3 Flexible
- B. GlobalSign Root R1
- C. Baltimore CyberTrust Root CA
- D. GlobalSign Root R2
正解：C
質問 # 102
What is the correct order for the DDOS Deduplication process?
- A. Fingerprint, Segment, Filter, and Compress
- B. Segment, Fingerprint, Filter, and Compress
- C. Filter, Compress, Segment, and Fingerprint
- D. Compress, Filter, Fingerprint, and Segment
正解：B
質問 # 103
What is the maximum number of concurrently active virtual tape library instances on each PowerProtect DD appliance?
- A. 0
- B. 1
- C. 2
- D. 3
正解：D
質問 # 104
Which command is used to add storage to either the active or cloud tier?
- A. enclosure add storage
- B. storage add cloud
- C. storage add enclosure
- D. storage add disks
正解：A
質問 # 105
A PowerProtect DD administrator must optimize TCP/IP performance on AIX host, what setting must be used for each NIC interface?
- A. tcp_pmtu_discover to 1
- B. large_send to yes
- C. large_send to no
- D. tcp_pmtu_discover to 0
正解：C
質問 # 106
An administrator is configuring an AWS S3 cloud unit on their DD9400.
Which certificate must be imported before adding the cloud unit?
- A. S3 Flexible
- B. GlobalSign Root R1
- C. Baltimore CyberTrust Root CA
- D. GlobalSign Root R2
正解：C
質問 # 107
An administrator is scaling Cloud Tier for a DD9900 by adding a second cloud unit.
What is the required amount of metadata storage (TB)?
- A. 0
- B. 1
- C. 2
- D. 3
正解：D
質問 # 108
What is the maximum capacity for an on-premises DDVE with no cloud storage?
- A. 96 TB
- B. 64 TB
- C. 128 TB
- D. 256 TB
正解：A
質問 # 109
A systems administrator wants to change encryption.
Which user role is needed to log in, and what command must be run to enable the security policy?
- A. sysadmin user and run authorization policy set security-officer enabled
- B. security officer user and run authentication policy set security-officer enabled
- C. security officer user and run authorization policy set security-officer enabled
- D. sysadmin user and run authentication policy set security-officer enabled
正解：C
質問 # 110
What is the Backup Data packet flow from the Amavar Client to the PowerProtect DD appliance?
- A. Through the Amavar Data Store and then to PowerProtect DD
- B. Through the Storage Node and then to PowerProtect DD
- C. Through the Amavar Server and then to PowerProtect DD
- D. Direct from the client to PowerProtect DD
正解：D
質問 # 111
A PowerProtect DD with two ES40 expansion shelves was just installed. An error message is received.
What is the most likely reason?
- A. The host port on the expansion shelf connects upstream to the controller
- B. The expansion port on the last shelf connects back to the controller
- C. The expansion port on the shelf connects downstream to the host port of the next shelf
- D. The controller HBA port connects to the host port of an expansion shelf
正解：B
質問 # 112
......
あなたを合格させるEMC試験にはD-PDD-DY-23試験問題集：https://www.jpntest.com/shiken/D-PDD-DY-23-mondaishu
D-PDD-DY-23試験問題集でEMC練習テスト問題：https://drive.google.com/open?id=1DqpCfcDLvjHxZXzkYyPWk105VwNG8eXh