2025年最新のに更新された検証済みの合格させるFCSS_NST_SE-7.4リアル試験問題と解答
問題集返金保証付きのFCSS_NST_SE-7.4問題集公式問題集
Fortinet FCSS_NST_SE-7.4 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
質問 # 15
Refer to the exhibit.
Assuming a default configuration, which three statements are true? (Choose three.)
- A. User C: Fail. There is no route to 10.0.4.63 using port1 in the touting table.
- B. User A: Pass. The default static route through wan1 passes the RPF check regardless of the source IP address.
- C. User B: Pass. FortiGate will use asymmetric routing using wan1 to reply to traffic for 95.56.234.24.
- D. User B: Fail. There is no route to 95.56.234.24 using wan2 in the routing table.
- E. Strict RPF is enabled by default.
正解：A、C、D
質問 # 16
Exhibit 1.
Exhibit 2.
Refer to the exhibits, which show the configuration on FortiGate and partial internet session information from a user on the internal network.
An administrator would like to lest session failover between the two service provider connections.
Which two changes must the administrator make to force this existing session to immediately start using the other interface? (Choose two.)
- A. Configure unsetsnat-route-change to return it to the default setting.
- B. Change the priority of the port! static route to 11.
- C. Change the priority of the port2 static route to 5.
- D. Configure setsnat-route-change enable.
正解：B、D
質問 # 17
Consider the scenario where the server name indication (SNI) does not match either the common name (CN) or any of the subject alternative names (SAN) in the server certificate.
Which action will FortiGate take when using the default settings for SSL certificate inspection?
- A. FortiGate closes the connection because this represents an invalid SSL/TLS configuration.
- B. FortiGate uses the SNI from the user's web browser.
- C. FortiGate uses the ZN information from the Subject field in the server certificate.
- D. FortiGate uses the first entry listed in the SAN field in the server certificate.
正解：D
質問 # 18
Exhibit.
Refer to the exhibit, which shows the output of diagnose automation test.
What can you observe from the output? (Choose two.)
- A. An HA failover occurred.
- B. The automation stitch test failed but the HA failover was successful.
- C. The automation stitch test is not being logged.
- D. The test was unsuccessful.
正解：C、D
質問 # 19
Refer to the exhibits.
An administrator Is expecting to receive advertised route 8.8.8.8/32 from FGT-A. On FGT-B, they confirm that the route is being advertised and received, however, the route is not being injected into the routing table.
What is the most likely cause of this issue?
- A. A batter route to the 8.8.8.8/32 network exists in the routing table.
- B. The administrator has misconfigured redistribution of routes on FGT-A.
- C. FGT-8 is configured with a distribution list denying the 8.8.8.8/32 network to be injected into the routing table.
- D. FGT-B is configured with a prefix list denying the 8.8.8.8/32 network to be injected into the routing table.
正解：D
質問 # 20
Exhibit.
Refer to the exhibit, which shows the output of a session. Which two statements are true? (Choose Iwo.)
- A. The session is being inspected using flow inspection.
- B. The session is being offloaded.
- C. The session was initiated from an authenticated user.
- D. The TCP session has been successfully established.
正解：C、D
質問 # 21
Which two statements about conserve mode are true? (Choose two.)
- A. FortiGate starts dropping all new sessions when the system memory reaches the configured red threshold.
- B. FortiGate enters conserve mode when the system memory reaches the configured extreme threshold.
- C. FortiGate exits conserve mode when the system memory goes below the configured green threshold.
- D. FortiGate starts taking the configured action for new sessions requiring content inspection when the system memory reaches the configured red threshold.
正解：C、D
質問 # 22
Exhibit.
Refer to the exhibit, which shows two entries that were generated in theFSSO collectoragent logs.
What three conclusions can you draw from these log entries? {Choose three.)
- A. DNS resolution is unable to resolve the workstation name.
- B. Remote registry is not running on the workstation.
- C. The FortiGate firmware version is not compatible with that of the collector agent.
- D. The user's status shows as "not verified" in the collector agent.
- E. A firewall is blocking traffic to port 139 and 445.
正解：B、D、E
質問 # 23
What are two reasons you might see iprope_in_check() check failed, drop when using the debug flow?
(Choose two.)
- A. Packet was dropped because of policy route misconfiguration.
- B. Packet was dropped because of traffic shaping.
- C. VIP or IP pool misconfiguration.
- D. Trusted host list misconfiguration.
正解：C、D
質問 # 24
Exhibit.
Refer to the exhibit, which contains partial output from an IKE real-time debug.
Which two statements about this debug output are correct? (Choose two.)
- A. The initiator provided remote as its IPsec peer ID.
- B. Perfect Forward Secrecy (PFS) is enabled in the configuration.
- C. The local gateway IP address is 10.0.0.1.
- D. It shows a phase 2 negotiation.
正解：A、D
質問 # 25
Refer to the exhibit, which shows the output of get router info bgp summary.
Which two statements are true? (Choose two.)
- A. The local FortiGate is still calculating the prefixes received from BGP neighbor 100.64.2.264
- B. The TCP connection with BGP neighbor 100.64.2.254 was successful.
- C. The local ForliGate has received one prefix from BGP neighbor 100.64.1.254.
- D. The local FortiGate has received 18 packets from a BGP neighbor.
正解：C、D
質問 # 26
An administrator wants to capture encrypted phase 2 traffic between two FotiGate devices using the built-in sniffer.
If the administrator knows that there Is no NAT device located between both FortiGate devices, which command should the administrator run?
- A. diagnose sniffer packet any 'udp port 4500'
- B. diagnose sniffer packet any 'ah'
- C. diagnose sniffer packet any 'udp port 500'
- D. diagnose sniffer packet any 'lp proto 50'
正解：D
質問 # 27
Refer to the exhibit, which shows the output o! the BGP database.
Which two statements are correct? (Choose two.)
- A. The advertised prefix of 10.20.30.0'24 is being advertised through the redistribution of another routing protocol.
- B. The advertised prefix of 10.20.30.0'24 was configured using the network command.
- C. The first four prefixes are being advertised using a legacy route advertisement.
- D. The output shows all prefixes advertised by all neighbors as well as the local router.
正解：B、D
質問 # 28
Exhibit.
Refer to the exhibit, which shows a partial web fillet profile configuration.
Which action does FortiGate lake if a user attempts to access www. dropbox. com, which is categorized as File Sharing and Storage?
- A. FortiGate blocks the connection as an invalid URL.
- B. FortiGate blocks the connection, based on the FortiGuard category based filter configuration.
- C. FortiGate allows the connection, based on the URL Filter configuration.
- D. FortiGate exempts the connection, based on the Web Content Filter configuration.
正解：B
質問 # 29
Refer to the exhibit, which shows the output of a policy route table entry.
Which type of policy route does the output show?
- A. AnSD-WAN rule
- B. A regular policy route
- C. An ISDB route
- D. A regular policy route, which is associated with an active static route in the FIB
正解：C
質問 # 30
Refer to the exhibit, which shows partial outputs from two routing debug commands.
Which change must an administrator make on FortiGate to route web traffic from internal users to the internet, using ECMP?
- A. Set the priority of the static default route using port2 to 1.
- B. Set snat-route-change to enable.
- C. Set the priority of the static default route using port1 to 10.
- D. Set preserve-session-route to enable.
正解：C
質問 # 31
......
更新されたPDF（2025年最新）実際にあるFortinet FCSS_NST_SE-7.4試験問題：https://www.jpntest.com/shiken/FCSS_NST_SE-7.4-mondaishu
検証済みのFCSS_NST_SE-7.4試験問題集PDF[2025年最新] 成功の秘訣はJPNTest：https://drive.google.com/open?id=1V6BKY-QB6VEGfhbtf2JL0BmrHGXug_fk