2025年最新の実際に出るD-PST-DY-23問題集には試験のコツがあるPDF試験材料
心強いD-PST-DY-23PDF問題集はD-PST-DY-23問題
EMC D-PST-DY-23認定試験は、90分以内に完了する必要がある60の複数選択質問で構成されています。この試験は、コンピューターベースのテストサービスの大手プロバイダーであるPearson Vueによって管理されています。候補者は、世界中のPearson Vueテストセンターで試験を受けることができます。
EMC D-PST-DY-23試験（Dell PowerStore Deploy 2023試験とも呼ばれる）は、IT業界で最も人気のある認定試験の1つです。この試験は、Dell PowerStoreストレージソリューションを展開および管理する責任を持つIT専門家を対象としています。試験では、Dell PowerStoreソリューションのインストール、設定、トラブルシューティングなど、幅広いトピックがカバーされます。
EMC D-PST-DY-23試験に合格すると、候補者がDell EMC Powerstoreシステムを効果的に展開および管理するために必要なスキルと知識を持っていることが示されています。この認定はIT業界で非常に評価されており、候補者がキャリアを進め、収益の可能性を高めるのに役立ちます。さらに、Dell Powerstore Deploy 2023で認定されることは、組織がITの専門家がPowerStoreシステムを効果的に展開および管理するために必要なスキルを備えていることを保証するのに役立ちます。
質問 # 10 
An administrator is setting up a new ESXi cluster using NVMe over TCP. The administrator is given the following parameters:
Volume Details
Name: nvme-ds-01
Category: Virtualization
Application: Containers/Kubernetes
Volume Performance Policy: High
Size: 2 TB
Host Details
Name: ESXi-01
Initiator Type: NVMe
Host Mappings: NVMe
Use the simulator to add the host and the volume and give the host access to the volume using the above parameters.
When you have finished, continue to the next question.
正解：
解説：
See the steps in Explanation.
Explanation:
1. On the simulator, click on theStoragetab on the left sidebar. Then click on theVolumessubtab. You will see a list of existing volumes on the cluster.
2. To create a new volume, click on theCreatebutton on the top right corner. A dialog box will appear where you can enter the volume details.
3. Enter the name of the volume asnvme-ds-01. Select the category asVirtualizationand the application asContainers/Kubernetes. These are optional fields that help you organize and identify your volumes.
4. Select the volume performance policy asHigh. This will optimize the volume for high performance and low latency. You can also customize the policy by clicking on theAdvancedbutton and adjusting the settings.
5. Enter the size of the volume as2 TB. You can also enable thin provisioning, compression, and deduplication if you want to save space and improve efficiency. Click on theCreatebutton to create the volume.
6. You will see a confirmation message that the volume has been created successfully. Click on theClosebutton to exit the dialog box. You will see the new volume in the list of volumes.
7. To add a new host, click on theHostssubtab on the left sidebar. You will see a list of existing hosts on the cluster.
8. To create a new host, click on theCreatebutton on the top right corner. A dialog box will appear where you can enter the host details.
9. Enter the name of the host asESXi-01. Select the initiator type asNVMe. This will enable the host to use the NVMe over TCP protocol to access the volumes.
10. To add the host mappings, click on theAdd Mappingbutton. A dialog box will appear where you can select the volume and the access type.
11. Select the volumenvme-ds-01from the drop-down menu. Select the access type asNVMe. This will map the volume to the host using the NVMe over TCP protocol. Click on theAddbutton to add the mapping.
12. You will see the mapping in the list of host mappings. You can add more mappings if you want to map more volumes to the host. Click on theCreatebutton to create the host.
13. You will see a confirmation message that the host has been created successfully. Click on theClosebutton to exit the dialog box. You will see the new host in the list of hosts.
14. You have completed the task of adding the host and the volume and giving the host access to the volume using the NVMe over TCP protocol. You can verify the configuration by clicking on the host or the volume and checking the details.
質問 # 11
What is a way to verify the data path connectivity between a source VNX2 storage system and the PowerStore system when configuring an import session?
- A. Verify host initiators on PowerStore Manager
- B. Review Server Manager MPIO properties
- C. Examine Fibre Channel zoning
- D. Use the VNX2 SP ping operation
正解：D
質問 # 12
Which storage protocol is commonly used for block-level access in PowerStore environments?
- A. NFS (Network File System)
- B. iSCSI (Internet Small Computer System Interface)
- C. HTTP (Hypertext Transfer Protocol)
- D. SMB (Server Message Block)
正解：B
質問 # 13
A storage administrator has provisioned 10 × 2GB volumes. 400MB of data is written to each of the ten volumes.
What is the Thin Savings ratio for this configuration?
- A. 4:1
- B. 3:1
- C. 5:1
- D. 6:1
正解：C
質問 # 14
Place the steps in order for configuring source and destination vCenters when setting up a vVol replication with SRM.
正解：
解説：
1 - Policy structure - select Enable rules for "Dell EMC PowerStore" storage.
2 - select snapshot protection rule Snap
3 - select replication protection rule vVol
4 - Storage compatibility - verify that the vVol-PowerStore-A container is displayed.
質問 # 15
Which two statements are true regarding host group configurations? (Choose two.)
- A. Maps volumes to all hosts in the host group.
- B. Allows mixed protocol type hosts within the same host group.
- C. Volume-related operations are made across all hosts in the group.
- D. Allows mapping volumes to individual hosts in the host group.
正解：A、C
質問 # 16
During the discovery step of implementation, an unconfigured PowerStore is unavailable.
Which firewall ports must be open for a successful discovery?
- A. TCP port 8443 and UDP port 5353
- B. TCP and UDP ports 443 and 80
- C. TCP port 80 and UDP port 80
- D. TCP port 5353 and UDP port 5353
正解：A
質問 # 17
What is the minimum number of storage drives required for a base enclosure?
- A. 0
- B. 1
- C. 2
- D. 3
正解：B
質問 # 18
What is the default replication interface assigned after initial configuration of a PowerStore 5000T system?
- A. 4PortCard-FEPort1
- B. LACP bond
- C. 10 GbE Optical Port-0 in IOModule-0
- D. 4PortCard-FEPort0
正解：B
質問 # 19
While configuring a Dell switch with PowerStore, what are the recommended license outputs from a show license status command?
- A. Status: Term-Based, Type: Unlimited
- B. Status: Perpetual, Type: Open
- C. Type: Term-Based, Status: Active
- D. Type: Perpetual, Status: Active
正解：D
質問 # 20
Refer the exhibit.
- A file system with 100 GB size is enabled with a protection policy.
- The administrator expanded the file system size to 300 GB size.
- The file system is filled up to 200 GB.
- The file system is restored with the snapshot FS1 Snap 1.
What will be the new size of the file system after restore activity?
- A. 200 GB
- B. 300 GB
- C. 80 GB
- D. 100 GB
正解：D
質問 # 21
While trying to add iSCSI hosts to a host group, some of the hosts are not showing up within the Add Host Group list.
What is causing this?
- A. iSCSI CHAP is disabled
- B. Storage network is not configured
- C. Missing hosts have mapped volumes
- D. Missing hosts are marked for iSCSI and FC
正解：C
質問 # 22
When manually migrating a volume between PowerStore appliances, in what order should the tasks be carried out?
- A. 1. Rescan the Hosts
2. Select destination appliance and then start migration
3. Select a volume and then select Migrate
4. Select migrate now - B. 1. Rescan the Hosts
2. Select migrate now
3. Select a volume and then select Migrate
4. Select destination appliance and then start migration - C. 1. Select a volume and then select Migrate
2. Select migrate now
3. Select destination appliance and then start migration
4. Rescan the Hosts - D. 1. Select a volume and then select Migrate
2. Select destination appliance and then start migration
3. Rescan the Hosts
4. Select migrate now
正解：D
質問 # 23
Which two statements are true of PowerStore File Migration import? (Choose two.)
- A. Both SMB and NFS are supported, but cannot be mixed.
- B. The source file system can be a replica.
- C. Snapshots and snapshot schedules are migrated
- D. VNX2 arrays are supported with VDM.
- E. PS arrays are supported with PowerPath.
正解：A、D
質問 # 24 
An administrator is setting up a new ESXi cluster using NVMe over TCP. The administrator is given the following parameters:
Volume Details
Name: nvme-ds-01
Category: Virtualization
Application: Containers/Kubernetes
Volume Performance Policy: High
Size: 2 TB
Host Details
Name: ESXi-01
Initiator Type: NVMe
Host Mappings: NVMe
Use the simulator to add the host and the volume and give the host access to the volume using the above parameters.
When you have finished, continue to the next question.
正解：
解説：
See the steps in Explanation.
Explanation:
1. On the simulator, click on theStoragetab on the left sidebar. Then click on theVolumessubtab. You will see a list of existing volumes on the cluster.
2. To create a new volume, click on theCreatebutton on the top right corner. A dialog box will appear where you can enter the volume details.
3. Enter the name of the volume asnvme-ds-01. Select the category asVirtualizationand the application asContainers/Kubernetes. These are optional fields that help you organize and identify your volumes.
4. Select the volume performance policy asHigh. This will optimize the volume for high performance and low latency. You can also customize the policy by clicking on theAdvancedbutton and adjusting the settings.
5. Enter the size of the volume as2 TB. You can also enable thin provisioning, compression, and deduplication if you want to save space and improve efficiency. Click on theCreatebutton to create the volume.
6. You will see a confirmation message that the volume has been created successfully. Click on theClosebutton to exit the dialog box. You will see the new volume in the list of volumes.
7. To add a new host, click on theHostssubtab on the left sidebar. You will see a list of existing hosts on the cluster.
8. To create a new host, click on theCreatebutton on the top right corner. A dialog box will appear where you can enter the host details.
9. Enter the name of the host asESXi-01. Select the initiator type asNVMe. This will enable the host to use the NVMe over TCP protocol to access the volumes.
10. To add the host mappings, click on theAdd Mappingbutton. A dialog box will appear where you can select the volume and the access type.
11. Select the volumenvme-ds-01from the drop-down menu. Select the access type asNVMe. This will map the volume to the host using the NVMe over TCP protocol. Click on theAddbutton to add the mapping.
12. You will see the mapping in the list of host mappings. You can add more mappings if you want to map more volumes to the host. Click on theCreatebutton to create the host.
13. You will see a confirmation message that the host has been created successfully. Click on theClosebutton to exit the dialog box. You will see the new host in the list of hosts.
14. You have completed the task of adding the host and the volume and giving the host access to the volume using the NVMe over TCP protocol. You can verify the configuration by clicking on the host or the volume and checking the details.
質問 # 25
SIMULATION
In a PowerStore T source cluster create a 100GB volume with name "Prod_vol" with a category of "Other". Set its protection policy to replicate the volume with an RPO of 30 minutes to Cluster1. The destination cluster is already configured.
When you have finished, continue to the next question.
正解：
解説：
see the steps in explanation below
Explanation:
1. Log in to the PowerStore Manager of the source cluster.
2. From the top menu, click Storage and select Volumes from the drop-down list
3. Click Create and enter the following information:
4. Name: Prod vol
5. Description: (optional)
6. Quantity: 1
7. Size: 100 GB
8. Application Tag: Other
9. Click Next and select the protection policy that has a replication rule to Cluster1 with an RPO of 30 minutes. If there is no such policy, click Create and follow the steps to create a new protection policy with a replication rule
10. Click Next and review the summary of the volume creation.
11. Click Create to create the volume and start the replication session to Cluster1.
質問 # 26
SIMULATION
A storage admin is setting up a new protection policy with only snapshot rule for a new file system in PowerStore.
The administrator is given the below parameters.
Use the simulator to perform the configuration task.
When you have finished continue to the next question.
正解：
解説：
See explanation below
Explanation:
1. Create the File System
Navigate to Storage > File Systems.
Click Add File System.
Enter the file system name: FS-1
Set the file system size to 5 TB.
Select the appropriate NAS Server (SMB-NAS Server in this case).
Click Add.
2. Create the Protection Policy
Navigate to Protection > Protection Policies.
Click Add Protection Policy.
Enter the policy name: Policy-1
Click Next.
3. Configure the Snapshot Rule
In the "Snapshot Rules" section, click Add Rule.
Enter a name for the rule (e.g., "Snap-Rule").
Set the Days to Tuesday.
Set the Every field to 1 Hour.
Ensure that Retention is set to the default value.
Click Add.
Click Next.
4. Review and Finish
Review the protection policy summary.
Click Finish.
5. Apply the Protection Policy to the File System
Navigate back to Storage > File Systems.
Locate the FS-1 file system.
Click the More Actions button (three vertical dots) and select Edit.
In the "Protection Policy" field, select the newly created Policy-1 from the dropdown list.
Click Save.
Verification
To verify the configuration, go to Protection > Protection Policies.
Select Policy-1.
You should see the configured snapshot rule ("Snap-Rule") with the specified settings.
Key Considerations
Default Retention: The default retention for snapshots in PowerStore will vary depending on your system configuration. Ensure that the default retention meets your data protection needs.
Snapshot Schedule: The snapshot rule you created will take hourly snapshots of the file system every Tuesday.
By following these steps, you'll successfully create the protection policy with the specified snapshot rule and apply it to the new file system, meeting all the requirements of the simulation task.
質問 # 27
How is the upgrade process on a multi-appliance cluster run?
- A. Master appliance primary node first, then the peer node
- B. On all primary nodes first, then peer nodes
- C. In parallel on all nodes
- D. On one node at a time
正解：D
質問 # 28
Refer to the Exhibit.
Which port location in the graphic is used for network management connectivity on a PowerStore X?
- A. 0
- B. 1
- C. 2
- D. 3
正解：D
質問 # 29
What is the purpose of the PowerStore Quick Start Guide during the initial configuration process?
- A. To provide entertainment options
- B. To guide users through setup steps
- C. To troubleshoot hardware failures
- D. To enable advanced system tuning
正解：B
質問 # 30
Which two NAS servers must be configured with DNS support? (Choose two.)
- A. Servers that are used as FTP servers.
- B. Servers that are joined to Active Directory.
- C. Servers that are accessed through S3 protocol.
- D. Servers that are configured as Standalone.
- E. Servers that are used for Multiprotocol access.
正解：B、E
質問 # 31
What is a requirement for the Import External Storage migration feature?
- A. PowerStore LACP bonded ports are tagged for replication
- B. Direct Fibre Channel connections between storage systems
- C. PowerPath host-based multipathing software
- D. PowerStore Global Storage Discovery IP address must be configured
正解：D
質問 # 32
Which PowerStore configuration is designed for high-performance, enterprise-grade workloads?
- A. PowerStore T
- B. PowerStore A
- C. PowerStore M
- D. PowerStore S
正解：A
質問 # 33
What establishes a data path between the ESXi hosts and the PowerStore storage container having vVols?
- A. Protocol Endpoints
- B. VASA Provider
- C. NFSv4 Protocol
- D. VASA Protocol
正解：A
質問 # 34
......
結果を保証するには最新2025年12月無料：https://www.jpntest.com/shiken/D-PST-DY-23-mondaishu
正真正銘のD-PST-DY-23問題集で無料PDF問題で合格させる：https://drive.google.com/open?id=1kITDuNeAq6MGMiO1kSLAV5meOzcmFbUb