2025年最新の認定サンプル問題NSK200問題集と練習試験合格させます
NSK200豪華セット学習ガイドにはオンライン試験エンジン
Netskope NSK200 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
質問 # 28
Review the exhibit.
You are at the Malware Incident page. A virus was detected by the Netskope Heuristics Engine. Your security team has confirmed that the virus was a test data file You want to allow the security team to use this file Referring to the exhibit, which two statements are correct? (Choose two.)
- A. Contact the CrowdStrike administrator to have the file marked as safe.
- B. Create a malware detection profile and update the file hash list with the IOC.
- C. Click the ''Lookup VirusTotal" button to verify if this IOC is a false positive.
- D. Click the "Add To File Filter button to add the IOC to a file list.
正解：C、D
解説：
Explanation
To allow the security team to use the test data file that was detected as a virus by the Netskope Heuristics Engine, the following two steps are correct:
Click the "Add To File Filter" button to add the IOC to a file list. This will exclude the file from future malware scans and prevent false positive alerts. The file list can be managed in the Settings > File Filter page1.
Click the "Lookup VirusTotal" button to verify if this IOC is a false positive. This will open a new tab with the VirusTotal report for the file hash. VirusTotal is a service that analyzes files and URLs for viruses, worms, trojans, and other kinds of malicious content. The report will show how many antivirus engines detected the file as malicious and provide additional information about the file2.
https://docs.netskope.com/en/netskope-help/admin-console/incidents/
質問 # 29
Your company has many users that are remote and travel often. You want to provide the greatest visibility into their activities, even while traveling. Using Netskope. which deployment method would be used in this scenario?
- A. Use a GRE tunnel.
- B. Use a Netskope client.
- C. Use an IPsec tunnel.
- D. Use proxy chaining.
正解：B
解説：
The best deployment method for remote and traveling users is to use a Netskope client. The Netskope client is a lightweight software agent that runs on the user's device and steers web and cloud traffic to the Netskope cloud for real-time inspection and policy enforcement1. The Netskope client provides an always-on end user remote access experience and avoids backhauling (or hairpinning) remote users through the corporate network to access applications in public cloud environments2. The Netskope client also supports offline mode, which allows users to work offline and sync their policies when they reconnect to the internet
質問 # 30
You are given an MD5 hash of a file suspected to be malware by your security incident response team. They ask you to offer insight into who has encountered this file and from where was the threat initiated. In which two Skope IT events tables would you search to find the answers to these questions? (Choose two.)
- A. Page Events
- B. Alerts
- C. Network Events
- D. Application Events
正解：B、D
解説：
To find the answers to the questions posed by the security incident response team, you need to search in the Application Events and Alerts tables in Skope IT. The Application Events table shows the details of the cloud application activities performed by the users, such as upload, download, share, etc. You can filter the Application Events table by the MD5 hash of the file to find out who has encountered this file and from which cloud service it was downloaded1. The Alerts table shows the details of the policy violations triggered by the users, such as DLP, threat protection, anomaly detection, etc. You can filter the Alerts table by the MD5 hash of the file to find out if this file was detected as malware by Netskope and what action was taken2. Therefore, options A and C are correct and the other options are incorrect. References: Application Events - Netskope Knowledge Portal, Alerts - Netskope Knowledge Portal
質問 # 31
Your customer has deployed the Netskope client to secure their Web traffic. Recently, they have enabled Cloud Firewall (CFW) to secure all outbound traffic for their endpoints. Through a recent acquisition, they must secure all outbound traffic at several remote offices where they have access to the local security stack (routers and firewalls). They cannot install the Netskope client.
- A. They can use IPsec and GRE tunnels with Cloud Firewall.
- B. They can deploy Netskope's DPOP to steer the targeted traffic to the Netskope Security Cloud.
- C. They can configure Reverse Proxy integrated with their IdP.
- D. They can secure the targeted outbound traffic using Netskope's Cloud Threat Exchange (CTE).
正解：A
解説：
The correct solution is to use IPsec and GRE tunnels with Cloud Firewall. Netskope Cloud Firewall supports secure tunneling methods such as IPsec and GRE, enabling companies to steer traffic to the Netskope Security Cloud without requiring the Netskope client. This is particularly useful when endpoint installation of the client is not feasible, such as in remote offices where network infrastructure like routers and firewalls are available.
質問 # 32
You are given an MD5 hash of a file suspected to be malware by your security incident response team. They ask you to offer insight into who has encountered this file and from where was the threat initiated. In which two Skope IT events tables would you search to find the answers to these questions? (Choose two.)
- A. Page Events
- B. Alerts
- C. Network Events
- D. Application Events
正解：B、D
解説：
Explanation
To find the answers to the questions posed by the security incident response team, you need to search in the Application Events and Alerts tables in Skope IT. The Application Events table shows the details of the cloud application activities performed by the users, such as upload, download, share, etc. You can filter the Application Events table by the MD5 hash of the file tofind out who has encountered this file and from which cloud service it was downloaded1. The Alerts table shows the details of the policy violations triggered by the users, such as DLP, threat protection, anomaly detection, etc. You can filter the Alerts table by the MD5 hash of the file to find out if this file was detected as malware by Netskope and what action was taken2. Therefore, options A and C are correct and the other options are incorrect. References: Application Events - Netskope Knowledge Portal, Alerts - Netskope Knowledge Portal
質問 # 33
Which statement describes how Netskope's REST API, v1 and v2, handles authentication?
- A. Both REST API v1 and v2 require the use of tokens to make calls to the API
- B. Neither REST API v1 nor v2 require the use of tokens.
- C. REST API v1 requires the use of a token to make calls to the API. while API v2 does not.
- D. REST API v2 requires the use of a token to make calls to the API. while API vl does not.
正解：A
解説：
The statement that describes how Netskope's REST API, v1 and v2, handles authentication is A. Both REST API v1 and v2 require the use of tokens to make calls to the API. A token is a unique string that identifies the user or application that is making the API request. The token must be included in the HTTP header of every API call as an authorization parameter1. The token can be generated from the Netskope UI or from the Netskope Platform API2. The token can also be revoked or refreshed as needed3. Therefore, option A is correct and the other options are incorrect. References: REST API v1 Overview - Netskope Knowledge Portal, Netskope Platform API Endpoints for REST API v1 - Netskope Knowledge Portal, REST API v2 Overview - Netskope Knowledge Portal
質問 # 34
You are creating an API token to allow a DevSecOps engineer to create and update a URL list using REST API v2. In this scenario, which privilege(s) do you need to create in the API token?
- A. Provide read and write access for the "/events" endpoint.
- B. Provide only read access for the "/urllist" endpoint.
- C. Provide read and write access for the "/urllist" endpoint.
- D. Provide only write access for the "/urllist" endpoint.
正解：C
解説：
Explanation
To create an API token to allow a DevSecOps engineer to create and update a URL list using REST API v2, you need to provide read and write access for the "/urllist" endpoint. The "/urllist" endpoint is the API endpoint that allows you to manage URL lists in your Netskope tenant. You can use this endpoint to perform operations such as create, update, delete, or list URL lists3. To create an API token with this privilege, you need to go to Settings > Tools > REST API v2 > New Token, enter a token name and expiration time, add the
"/urllist" endpoint, and select Read+Write as the privilege4. This will allow the DevSecOps engineer to use the API token in their requests to create and update URL lists. Therefore, option B is correct and the other options are incorrect. References: REST API v2 Overview - Netskope Knowledge Portal, Manage URL Lists - Netskope Knowledge Portal
質問 # 35
You are using the Netskope DLP solution. You notice flies containing test data for credit cards are not triggering DLP events when uploaded to Dropbox. There are corresponding page events. Which two scenarios would cause this behavior? (Choose two.)
- A. The Netskope client Is not steering Dropbox traffic.
- B. The DLP rule has the severity threshold set to a value higher than the number of occurrences.
- C. There is no API protection configured for Dropbox.
- D. The credit card numbers in your test data are Invalid 16-dlglt numbers.
正解：B、D
解説：
There are two possible scenarios that would cause the behavior of files containing test data for credit cards not triggering DLP events when uploaded to Dropbox. One scenario is that the DLP rule has the severity threshold set to a value higher than the number of occurrences. This means that the rule will only trigger an event if the number of matches for the sensitive data exceeds the specified threshold. For example, if the rule has a severity threshold of 10 and the file contains only 5 credit card numbers, then no event will be generated. To fix this, you can lower the severity threshold or remove it altogether. The other scenario is that the credit card numbers in your test data are invalid 16-digit numbers. This means that the numbers do not pass the Luhn algorithm check, which is a validation method used by Netskope DLP to detect valid credit card numbers. For example, if the number is 1234-5678-9012-3456, then it is not a valid credit card number and will not be detected by Netskope DLP. To fix this, you can use valid test credit card numbers that pass the Luhn algorithm check. The other options are not valid scenarios for this behavior. The Netskope client is not steering Dropbox traffic is not a valid scenario because there are corresponding page events, which means that the traffic is being steered to Netskope. There is no API protection configured for Dropbox is not a valid scenario because API protection is not required for DLP detection on file uploads, which are handled by real- time protection. References: DLP Rule Settings1, Credit Card Number Detection2
質問 # 36
You want to allow both the user identities and groups to be imported in the Netskope platform. Which two methods would satisfy this requirement? (Choose two.)
- A. Use Bulk Upload with a CSV file.
- B. Use Directory Importer.
- C. Use System for Cross-domain Identity Management (SCIM).
- D. Use Manual Entries.
正解：A、C
解説：
To allow both the user identities and groups to be imported in the Netskope platform, you can use either the System for Cross-domain Identity Management (SCIM) method or the Bulk Upload with a CSV file method.
Both of these methods allow for the import of user identities and groups from different identity providers (IdPs) that support SCIM or CSV formats. The SCIM method is recommended for large-scale deployments, as it automates the exchange of user identity information across apps for user provisioning. The CSV method is recommended for small-scale deployments, as it allows for manual upload of user details in a comma- separated values file. The other methods are not suitable for this requirement. The Manual Entries method does not allow for the import of groups, only user emails. The Directory Importer method does not import users and groups directly into the Netskope platform, but rather connects to an Active Directory or LDAP server and periodically fetches user and group information.
References: Provisioning Users for Netskope Client2, SCIM Integration3, Bulk Upload via CSV file
質問 # 37
Which statement describes how Netskope's REST API, v1 and v2, handles authentication?
- A. Both REST API v1 and v2 require the use of tokens to make calls to the API
- B. Neither REST API v1 nor v2 require the use of tokens.
- C. REST API v1 requires the use of a token to make calls to the API. while API v2 does not.
- D. REST API v2 requires the use of a token to make calls to the API. while API vl does not.
正解：A
解説：
Explanation
The statement that describes how Netskope's REST API, v1 and v2, handles authentication is A. Both REST API v1 and v2 require the use of tokens to make calls to the API. A token is a unique string that identifies the user or application that is making the API request. The token must be included in the HTTP header of every API call as an authorization parameter1. The token can be generated from the Netskope UI or from the Netskope Platform API2. The token can also be revoked or refreshed as needed3. Therefore, option A is correct and the other options are incorrect. References: REST API v1 Overview - Netskope Knowledge Portal, Netskope PlatformAPI Endpoints for REST API v1 - Netskope Knowledge Portal, REST API v2 Overview - Netskope Knowledge Portal
質問 # 38
What are three methods to deploy a Netskope client? (Choose three.)
- A. Deploy Netskope client using email invite.
- B. Deploy Netskope client using REST API v1.
- C. Deploy Netskope client using REST API v2.
- D. Deploy Netskope client using SCCM.
- E. Deploy Netskope client using IdP.
正解：A、D、E
解説：
Explanation
Three methods to deploy a Netskope client are A. Deploy Netskope client using SCCM, C. Deploy Netskope client using email invite, and E. Deploy Netskope client using IdP. These are some of the methods that Netskope supports for packaging and installing the Netskope client on the user's device1. SCCM is a Microsoft tool that allows you to push the Netskope client silently to the user's device without requiring user intervention or local admin privileges2. Email invite is a method that sends an email to the user with a unique link to download and install the Netskope client. This method is quick and easy, but requires the user to initiate the installation and have local admin privileges3. IdP is a method that uses an identity provider (such as Azure AD or Okta) to authenticate the user and enroll the Netskope client. This method requires the UPN of the logged in user to match the directory, or use SAML/SSO as an alternative4. Therefore, options A, C, and E are correct and the other options are incorrect. References: Deploy the Netskope Client - Netskope Knowledge Portal, Deploying with Microsoft Endpoint Configuration Manager / SCCM - Netskope Knowledge Portal, Deploying with Email Invite - Netskope Knowledge Portal, Deploying with IdP - Netskope Knowledge Portal
質問 # 39
You are integrating Netskope tenant administration with an external identity provider. You need to implement role-based access control. Which two statements are true about this scenario? (Choose two.)
- A. Once integrated withIdP. you must append the "locallogin" URL to log in using IdP
- B. The roles you want to assign must be present in the Netskope tenant.
- C. You need to define the administrators locally in the Netskope tenant.
- D. You do not need to define the administrators locally in the Netskope tenant after It Is integrated with IdP.
正解：B、C
解説：
Explanation
To implement role-based access control when integrating Netskope tenant administration with an external identity provider (IdP), two statements that are true about this scenario are A. The roles you want to assign must be present in the Netskope tenant and C. You need to define the administrators locally in the Netskope tenant. Role-based access control (RBAC) is a feature that allows you to assign different levels of permissions and access to the Netskope tenant based on the user's role. You can use RBAC to integrate Netskope tenant administration with an external IdP such as Azure AD or Okta and delegate administrative tasks to different users or groups1. To do this, you need to ensure that the roles you want to assign are present in the Netskope tenant. You can use the predefined roles such as SYSADMIN, AUDITOR, or OPERATOR, or create custom roles with specific privileges2. You also need to define the administrators locally in the Netskope tenant by creating local user accounts and assigning them roles. You can use the same email address as the IdP user account for the local useraccount3. Therefore, options A and C are correct and the other options are incorrect. References: Role-Based Access Control - Netskope Knowledge Portal, Roles - Netskope Knowledge Portal, Integrate with Azure AD - Netskope Knowledge Portal
質問 # 40
Review the exhibit.
While diagnosing an NPA connectivity issue, you notice an error message in the Netskope client logs.
Referring to the exhibit, what does this error represent?
- A. The primary publisher is unavailable or cannot be reached.
- B. There Is an upstream device trying to intercept the NPA TLS connection.
- C. The Netskope client has been load-balanced to a different data center.
- D. There Is an EDNS or LDNS resolution error.
正解：B
解説：
The error message in the exhibit represents that there is an upstream device trying to intercept the NPA TLS connection. The error message is "ERROR SSL certificate verification failed: self signed certificate in certificate chain". This means that the Netskope client is receiving a certificate that is not issued by Netskope, but by a device that is intercepting and decrypting the traffic between the client and the Netskope cloud. This can cause the client to fail to establish a secure connection to the NPA service and access the private applications4. To solve this problem, you need to either bypass or trust the upstream device that is performing SSL decryption, such as a firewall or proxy5. Therefore, option D is correct and the other options are incorrect. References: Troubleshooting Netskope Client - Netskope Knowledge Portal, Netskope Client Troubleshooting Guide - The Netskope Community
質問 # 41
Your company has Microsoft Azure ADFS set up as the Identity Provider (idP). You need to deploy the Netskope client to all company users on Windows laptops without user intervention.
In this scenario, which two deployment options would you use? (Choose two.)
- A. Deploy the Netskope client with Microsoft GPO.
- B. Deploy the Netskope client using an email Invitation.
- C. Deploy the Netskope client with SCCM.
- D. Deploy the Netskope client using IdP.
正解：A、C
解説：
To deploy the Netskope client to all company users on Windows laptops without user intervention, you can use either SCCM or GPO. These are two methods of packaging the application and pushing it silently to the user's device using Microsoft tools4. These methods do not require the user to have local admin privileges or to initiate the installation themselves. They also allow enforcing the use of the client through company policy. The Netskope client can authenticate the user using Azure ADFS as the identity provider, as long as the UPN of the logged in user matches the directory5
質問 # 42
You are integrating Netskope tenant administration with an external identity provider. You need to implement role-based access control. Which two statements are true about this scenario? (Choose two.)
- A. Once integrated with IdP. you must append the "locallogin" URL to log in using IdP
- B. The roles you want to assign must be present in the Netskope tenant.
- C. You need to define the administrators locally in the Netskope tenant.
- D. You do not need to define the administrators locally in the Netskope tenant after It Is integrated with IdP.
正解：B、C
解説：
To implement role-based access control when integrating Netskope tenant administration with an external identity provider (IdP), two statements that are true about this scenario are A. The roles you want to assign must be present in the Netskope tenant and C. You need to define the administrators locally in the Netskope tenant. Role-based access control (RBAC) is a feature that allows you to assign different levels of permissions and access to the Netskope tenant based on the user's role. You can use RBAC to integrate Netskope tenant administration with an external IdP such as Azure AD or Okta and delegate administrative tasks to different users or groups1. To do this, you need to ensure that the roles you want to assign are present in the Netskope tenant. You can use the predefined roles such as SYSADMIN, AUDITOR, or OPERATOR, or create custom roles with specific privileges2. You also need to define the administrators locally in the Netskope tenant by creating local user accounts and assigning them roles. You can use the same email address as the IdP user account for the local user account3. Therefore, options A and C are correct and the other options are incorrect. References: Role-Based Access Control - Netskope Knowledge Portal, Roles - Netskope Knowledge Portal, Integrate with Azure AD - Netskope Knowledge Portal
質問 # 43
The director of IT asks for confirmation If your organization's Web traffic would be blocked when the Netskope client fails. In this situation, what would confirm the fail close status?
- A. Review user settings.
- B. Review the nsdebuglog.log.
- C. View Application events.
- D. Perform a right-click on the Netskope client icon using your mouse.
正解：B
解説：
The method that would confirm the fail close status is B. Review the nsdebuglog.log. The nsdebuglog.log is a log file that contains information about the Netskope client's status, configuration, events, errors, etc. You can review the nsdebuglog.log file to confirm the fail close status by looking for a line that says "failCloseStatus":
"1". This indicates that the fail close option is enabled for the Netskope client4. The fail close option is a feature that allows you to block all web traffic when the Netskope client fails or loses connection to the Netskope cloud5. Therefore, option B is correct and the other options are incorrect. References: Troubleshooting Netskope Client - Netskope Knowledge Portal, Client Configuration - Netskope Knowledge Portal
質問 # 44
After deploying the Netskope client to a number of devices, users report that the Client status indicates
"Admin Disabled". User and gateway information is displayed correctly in the client configuration dialog Why are clients installing in an "Admin Disabled" state in this scenario?
- A. The user's identity is not synchronized to Netskope.
- B. All devices were previously disabled by the administrator.
- C. The user's account has no mail ID attribute In Active Directory.
- D. The user's password was incorrect during enrollment.
正解：B
解説：
Explanation
The Netskope client can be disabled by the administrator from the Netskope console. This is useful for troubleshooting or maintenance purposes. When the client is disabled by the administrator, it shows the status as "Admin Disabled" and does not apply any policies or steer any traffic. The user cannot enable the client unless the administrator enables it from the console. The other options are not valid reasons for the client to be in an "Admin Disabled" state. References: Netskope Client Status 1, Enable or Disable Netskope Client 2
質問 # 45
Review the exhibit.
Your Real-time Protection policy contains some rules with only a browse activity. The exhibit shows a new policy rule.
Where is the correct location to place this rule?
- A. before browse activity
- B. at the bottom
- C. after browse activity
- D. at the top
正解：D
解説：
The correct practice is to place high-priority rules, such as those with specific scanning actions, at the top of the Real-time Protection policy rule list. Placing the rule at the top ensures it is applied before other less restrictive rules, like those configured only for browsing activities.
質問 # 46
Which object would be selected when creating a Malware Detection profile?
- A. File profile
- B. Domain profile
- C. User profile
- D. DLP profile
正解：A
解説：
A file profile is an object that contains a list of file hashes that can be used to create a malware detection profile. A file profile can be configured as an allowlist or a blocklist, depending on whether the files are known to be benign or malicious. A file profile can be created in the Settings > File Profile page1. A malware detection profile is a set of rules that define how Netskope handles malware incidents. A malware detection profile can be created in the Policies > Threat Protection > Malware Detection Profiles page2. To create a malware detection profile, one needs to select a file profile as an allowlist or a blocklist, along with the Netskope malware scan option. The other options are not objects that can be selected when creating a malware detection profile.
質問 # 47
You are implementing tenant access security and governance controls for privileged users. You want to start with controls that are natively available within the Netskope Cloud Security Platform and do not require external or third-party integration.
Which three access controls would you use in this scenario? (Choose three.)
- A. Applying predefined or custom roles to limit the admin's access to only those functions required for their job.
- B. Login attempts to set the number of failed attempts before the admin user is locked out of the Ul.
- C. IP allowlisting to control access based upon source IP addresses.
- D. History-based access control based on past security actions.
- E. Multi-factor authentication to verify a user's authenticity.
正解：A、B、C
解説：
Explanation
To implement tenant access security and governance controls for privileged users, you can use the following access controls that are natively available within the Netskope Cloud Security Platform and do not require external or third-party integration:
IP allowlisting to control access based upon source IP addresses. This allows you to specify the IP addresses that are allowed to access your Netskope tenant2. This can prevent unauthorized access from unknown or malicious sources.
Login attempts to set the number of failed attempts before the admin user is locked out of the UI. This allows you to configure how many times an admin can enter an incorrect password before being locked out for a specified period of time3. This can prevent brute-force attacks or password guessing attempts.
Applying predefined or custom roles to limit the admin's access to only those functions required for their job. This allows you to assign different levels of permissions and access rights to different admins based on their roles and responsibilities4. This can enforce the principle of least privilege and reduce the risk of misuse or abuse of admin privileges. Therefore, options A, B, and C are correct and the other options are incorrect. References: Secure Tenant Configuration and Hardening - Netskope Knowledge Portal, Admin Settings - Netskope Knowledge Portal, Create Roles - Netskope Knowledge Portal
質問 # 48
An engineering firm is using Netskope DLP to identify and block sensitive documents, including schematics and drawings. Lately, they have identified that when these documents are blocked, certain employees may be taking screenshots and uploading them. They want to block any screenshots from being uploaded.
Which feature would you use to satisfy this requirement?
- A. ML image classifier
- B. exact data match (EDM)
- C. document fingerprinting
- D. optical character recognition (OCR)
正解：A
解説：
Explanation
To block any screenshots from being uploaded, the engineering firm should use the ML image classifier feature of Netskope DLP. This feature uses machine learning to detect sensitive information within images, such as screenshots, whiteboards, passports, driver's licenses, etc. The firm can create a DLP policy that blocks any image upload that matches the screenshot classifier. This will prevent employees from circumventing the DLP controls by taking screenshots of sensitive documents. References: Improved DLP Image Classifiers, Netskope Data Loss Prevention, The Importance of a Machine Learning-Based Source Code Classifier
質問 # 49
Your organization has a homegrown cloud application. You are required to monitor the activities that users perform on this cloud application such as logins, views, and downloaded files. Unfortunately, it seems Netskope is unable to detect these activities by default.
How would you accomplish this goal?
- A. Ensure that the application is added to the SSL decryption policy.
- B. Create a new cloud application definition using the Chrome extension.
- C. Enable access to the application with Netskope Private Access.
- D. Ensure that the cloud application is added as a steering exception.
正解：B
解説：
Explanation
To monitor the activities that users perform on a homegrown cloud application, you need to create a new cloud application definition using the Chrome extension. The Chrome extension is a tool that allows you to record the traffic and activities of any web-based application and create a custom app definition that can be imported into your Netskope tenant1. This way, you can enable Netskope to detect and analyze the activities of your homegrown cloud application and apply policies accordingly. Therefore, option D is correct and the other options are incorrect. References: Creating a Cloud App Definition - Netskope Knowledge Portal
質問 # 50
......
NSK200問題集レビュー専門クイズで学習材料：https://www.jpntest.com/shiken/NSK200-mondaishu
NSK200テスト準備トレーニング練習試験問題練習テスト：https://drive.google.com/open?id=1d1pzhh2aL5397eSxQosgmq9gvvOWbJ5i