[2025年10月最新リリース]300-610問題集でCCNP Data Center認証
最新の完璧な300-610問題集問題と解答で100%パスさせます
質問 # 117
Refer to the exhibit.
A cloud provider service provider deployed three geographically separated Cisco ACI data centers. One of the customers needs to host a clustered application that is spread across the three data centers. The cluster nodes that host the application need a layer 2 topology to communicate with each other. Which Cisco ACI topology design meets these requirements?
- A. Multi-site
- B. Multi-pod over MP-BGP EVPN
- C. Multi-cloud
- D. Multi-pod over OSPF EVPN
正解：A
解説：
Each data center has its own APIC cluster. This is multi-site setup.
質問 # 118
Which feature must be configured to connect a classical Ethernet network to a data center network so that the data center network appears to be one large switch.
- A. EVPN
- B. VPC+
- C. OSPF
- D. UDLD
正解：A
解説：
A vPC allows links that are physically connected to two different Nexus switches to appear as single portchannel to a server or another switch.
質問 # 119
An engineer working for a telecommunication company with an employee ID:458:138:642 is evaluating the use of broadcast, unknown unicast, multicast replication modes for a VXLAN EVPN network. The engineer must leverage a pure unicast-based underlay network with the requirement to have multicast forwarding in the overlay. Which method must be used to achieve this task?
- A. PIM dense mode
- B. ingress replication
- C. PIM sparse mode
- D. Bidirectional PIM
正解：B
質問 # 120
Drag the requirements from the left onto the correct policy types on the right.
正解：
解説：
質問 # 121
Which two automation requirements can be met by using Puppet? (Choose two.)
- A. Enable clients to pull changes without installing an agent.
- B. Provide support for writing new modules in Python.
- C. Push configuration updates immediately to servers.
- D. Enable clients to pull changes to configuration files.
- E. Enable one-off infrastructure changes to be performed manually.
正解：C、D
解説：
Section: Automation Design
Explanation/Reference: https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-c-series- rack-servers/whitepaper_c11-740103.pdf
質問 # 122
You must design an OTV implementation that supports packets fragmentation.
Which option do you use?
- A. adjacency server to track the overlay membership
- B. OTV headers defined to allow core to hash traffic
- C. MTU size of 9216 bytes on all the join interfaces
- D. Cisco ASR 1000 Series Aggregation Services Router that has Advanced IP Services
正解：D
質問 # 123
An engineer develops a framework for automatic repetitive tasks needed to manage a Cisco Nexus 9000 Series Switch. The engineer plans to use a programmatic interface and must keep these considerations in mind.
*The customer's environment requires the script to authenticate before executing further actions.
*The customer's security requirements mandate the use of HTTP transport.
*The automation team is familiar with parsing messages encoded in XML or JSON format.
Which solution meets these requirements?
- A. NX-API
- B. RESTCONF
- C. SNMPv3
- D. gRPC
正解：A
質問 # 124
When planning to deploy a load-balancing service as a managed node, which ACI configuration must be included?
- A. ITD
- B. inline load-balancing device
- C. BGP ECMP
- D. Layer 4 to Layer 7 device package
正解：D
解説：
Section: Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/ACI_Best_Practices/ b_ACI_Best_Practices/b_ACI_Best_Practices_chapter_0110.html
質問 # 125
Refer to the exhibit.
An engineer is configuring a QoS policy with these requirements
Match-all AF11 traffic and set it to a DSCP value of 14.
The committed rate must be 10 Mbps with a committed burst rate of 1000 ms Drop any AF11 traffic that violates these settings.
Any traffic other than af11 must have a DSCP value of 0
The given class-map configuration already exists. Which solution must the engineer use to meet the requirements?
A)
B)
C)
D)
- A. Option D
- B. Option B
- C. Option C
- D. Option A
正解：C
質問 # 126
A customer is evaluating a new disaster-recovery solution for their SAN, which is used for noncritical CRM purposes. The SAN is frequently backed up locally at the customer's existing single location, and several hours of data loss can be sustained. The customer wants to retain complete control of the failover process to a separate physical location. Which type of DR is most suitable for the customer?
- A. active/active
- B. active/passive
- C. warm standby
- D. cold standby
正解：C
質問 # 127
What is the default CoS value for FCoE packets on a storage VDC?
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
正解：D
質問 # 128
A customer must install a new Hyperflex Stretched cluster in two sites. Low latency and predictable high performance are the top priorities for this setup due to the extensive usage of data-intensive applications across the cluster. Which HyperFlex storage solution is recommended to meet these requirements?
- A. Hybrid
- B. All-Flash
- C. All-HDD
- D. All-SAN
正解：B
質問 # 129
An engineer must connect a storage array directly to an existing Cisco UCS Fabric Interconnect. The customer requires a solution that provides IP-based storage that does not need to be connected through an external switch Also, the operations team wants to have the ability to have direct access to the files stored on the storage array from their Linux hosts. Which storage technology meets these requirements?
- A. FCoE
- B. SCSI
- C. SAN
- D. NAS
正解：D
質問 # 130
An engineer must interconnect two geographically separated data centers. The service provide offers a Layer 2 metro Ethernet link. The strict security policy requires that the information that is shared between two sites must be sent encrypted. The application deployed between sites requires a line-rate throughput regardless of the packet size and speed. Which solution meets these requirements?
- A. L2TPv2
- B. IPsec
- C. L2TPv3
- D. MACsec
正解：D
解説：
Reference:
質問 # 131
DRAG DROP
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.
Select and Place:
正解：
解説：
Section: Compute Design
質問 # 132
......
Cisco 300-610認定試験は、データセンターのインフラストラクチャを設計するIT専門家にとって非常に価値のある認定です。データセンターの設計に関連するさまざまな分野での候補者の知識とスキルをテストし、業界の最新のテクノロジーとトレンドをカバーしています。この認定試験に合格すると、データセンターのインフラストラクチャの設計における候補者の専門知識が検証され、IT業界でのキャリアを向上させるのに役立ちます。
最新の300-610試験問題集でCisco試験トレーニング：https://www.jpntest.com/shiken/300-610-mondaishu
2025年最新のの問題300-610問題集で最新のCisco試験を使おう：https://drive.google.com/open?id=1U7yP-h6xqy8VxdqpKj5Xk9EkCBsfGoj6