2026年最新の実際のH13-624_V5.5問題集PDFで100%合格率を保証します [Q86-Q107]

2026年最新の実際のJPNTest H13-624_V5.5問題集PDFで100%合格率を保証します

無料Huawei H13-624_V5.5試験問題と解答

質問 # 86
A financial customer has purchased a Huawei flash storage system for service deployment. An engineer configures the HyperCDP feature on the storage system and wants to create a HyperCDP schedule. Which of the following commands can the engineer use?

A. change hyper_cdp_schedule enabled
B. create fs_hyper_cdp general
C. create hyper_cdp_schedule general
D. add hyper_cdp_schedule fs

正解：C

解説：
The correct command to create a HyperCDP schedule on a Huawei flash storage system is create hyper_cdp_schedule general. This command defines the scheduling policy for automatic HyperCDP point creation based on the specified time or frequency parameters.

質問 # 87
The disaster recovery system can copy business data to a local or remote data center for protection.
Heng is not all data damage/ Loss can be recovered, which of the following data damage cannot be recovered by the disaster recovery system? (multiple choice)

A. Hard disk failure
B. Human misoperation
C. Virus attack
D. Business data center is paralyzed

正解：B、C

質問 # 88
In Huawei backup storage OceanProtect X3000, data reduction supports fixed-length (^duplication by default, but does not support variable-length (^duplication. Therefore, fixed-length ded11plication Is mainly used in the backup field.

A. FALSE
B. TRUE

正解：B

質問 # 89
FILL BLANK
A customer in the scientific research industry has purchased several Huawei OceanStor Pacific
9950 scale-out storage devices for high-performance service deployment. To meet service requirements, an engineer configures the distributed parallel client (DPC) to support POSIX and
____ access modes. Even MPI applications can obtain better access performance without any modification.

正解：

解説：
MPI-IO
Explanation:
Huawei OceanStor Pacific series storage supports distributed parallel client (DPC) access modes including POSIX and MPI-IO. MPI-IO enables high-performance parallel I/O for MPI applications without requiring code modification, meeting scientific computing requirements.

質問 # 90
(multiple choice) The value of Huawei OceanStor 9000 InfoTier is reflected in:

A. Improve system storage performance and realize intelligent data management.
B. Realize automatic file migration according to the corresponding relationship between file attributes and different storage devices, reducing the cost and complexity of manual management.
C. Comprehensively utilize the cost advantages of different storage media to effectively reduce deployment and maintenance costs.
D. It can ensure the system's response speed to hot data access and improve the storage performance of the entire system.

正解：A、B、C、D

質問 # 91
Colleagues customized Huawei's primary and backup disaster recovery solutions for customers. Customers have already selected one set of OceanStor 2600TV2 and one set of third In the storage system of the third party, the two sets of equipment are placed in two data centers to implement the main and backup disaster recovery. This solution:

A. Feasible, Huawei's active and standby disaster recovery solution can support the connection of OceanStor 2600T V2 equipment and third-party arrays.
B. Not feasible. Huawei's active and standby disaster recovery solution requires at least a storage system of OceanStor5600 V3 and above to be realized.
C. Not feasible. Huawei's active and standby disaster recovery solution requires at least one OceanStor V3 storage system to be implemented.

正解：C

質問 # 92
Which is the wrong description about the synchronous remote replication of the OceanStor V3 storage array?

A. Synchronous remote replication can support one master LUN to simultaneously replicate to two slave LUNs.
B. The impact of synchronous remote replication on the host's write IO performance has nothing to do with the distance between the master and slave sites.
C. The master array writes I/O write data to the master LUN and sends it to the slave LUN.
D. After the master and slave LUN write I/O are successful, the master array returns the write I/O success to the host.

正解：B

質問 # 93
The following statements about N8500CIFS sharing are correct: Multiple choice (multiple choice)

A. In normal mode, the client can only access the share through a VIP
B. If you don't need to distinguish between users who restrict access to the shared directory, you can choose normal sharing
C. Compared with the normal mode, the cluster mode has higher data reliability, but lower performance
D. If you do not need to distinguish between users who restrict access to the shared directory, you can choose homeedir share

正解：B、D

質問 # 94
Regarding the description of the data protection function of the Huawei Oceanstor 9000 system, which of the following options is incorrect?

A. Oceanstor 9000 realizes data recovery through ErasureCode
N+M redundant storage
B. After enabling physical domain partitioning, the hard disk or node in a single domain fails, Will lead to degradation or failure of data reliability in other domains
C. Oceanstor 9000 realizes redundant storage of metadata through mirroring
D. When the protection level is N+1, the minimum number of nodes required by the cluster is 3

正解：B

質問 # 95
SPC certification is a SAN performance test benchmark for third-party evaluation. Which of the following statements is true about SPC certification scenarios?

A. SPC-2 is used to test the SAN array performance in the OLPT, database, and email application scenarios.
B. SPC-2 applies to scenarios where random small I/Os are quickly responded.
C. SPC-2 applies to scenarios of sequential large I/O access.
D. SPC-1 applies to scenarios of sequential large I/O access.

正解：C

解説：
SPC (Storage Performance Council) benchmarks are discussed in the *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)*: "SPC-1 tests random I/O workloads, such as OLTP, database, and email scenarios, while SPC-2 tests sequential large I/O access, such as video streaming or backups." Let's evaluate:
- Option A: Incorrect. SPC-2 is for sequential large I/Os, not random small I/Os (which is SPC-1).
- Option B: Incorrect. SPC-1 is for random I/Os, not sequential large I/Os.
- Option C: Correct. SPC-2 is designed for sequential large I/O access scenarios.
- Option D: Incorrect. SPC-1, not SPC-2, tests OLTP, database, and email scenarios.
Thus, option C is true.
Reference:
HCIP-Storage V5.5 Training Material, Module 5: Storage System Maintenance and Troubleshooting, Section
5.14: Storage Performance Benchmarks*, Huawei Technologies Co., Ltd.
---

質問 # 96
Single-choice Which of the following options does not belong to the software module included in Huawei's Oceanstor 9000 product?

A. Wushan SQL
B. OceanStor DFS
C. vcs
D. Fusonsight Hadoop

正解：B、C、D

質問 # 97
When the amount of backup data is large, it is recommended to use an all-in-one deployment plan instead of a separate one.

A. False
B. True

正解：A

質問 # 98
A financial customer purchased an OceanStor Dorado 18000 series storage system for basic service deployment. During management, an engineer discovered that the running status of an iSCSI port on DeviceManager was "Link down". After checking the indicator in the equipment room, the engineer discovered that the link indicator of the iSCSI front-end port was steady red.
Which of the following are not possible causes of the exception?

A. The IP address of the iSCSI front-end port is incorrect.
B. The cable between the application server and the storage device is loose.
C. The optical module type is incompatible with the host port.
D. The IP address of the service network port on the application server is incorrectly set.

正解：C

解説：
An incompatible optical module type typically affects Fibre Channel (FC) ports rather than iSCSI ports, which use Ethernet and RJ45 or SFP interfaces.

質問 # 99
Multiple choice The description about the analysis and adjustment of the Oceanstor 9000 system NAS server parameters is wrong: (multiple choice)

A. If the data block transmitted by NFS is very large, it may increase the number of business interactions
B. ocenstor 9000 NFS transfer block size is 32KB by default
C. If the NFS transmission data block is very small, it may increase the number of business interactions.
D. ocenstor 9000 NFS transmission block size defaults to 1MB

正解：B、D

質問 # 100
Which of the following statements about backup networking LAN-free and Server-free is correct?

A. Server-free generates a copy during data backup, and the copy will be mounted to the backup server.
B. LAN-free backup networking has no impact on production hosts.
C. Server-free networking can directly back up the backup data to the backup medium.
D. The path of LAN-free backup data stream is production storage -> backup server -> backup media.

正解：A

質問 # 101
Send a control command through the backup server, first take a snapshot (or other similar operations) of the data volume that needs to be backed up, Make a copy, then use the backup server to mount the snapshot volume, and use the backup server to back up the data on this volume to the backup On the device. What type of backup networking is described in the above workflow?

A. Server-Less
B. LAN-Base
C. Server-Free
D. LAN-Free

正解：A

質問 # 102
An engineer wants to configure the iSCSI block service on a Huawei scale-out storage device. Which of the following operations must be performed by the engineer?

A. Configure the iSCSI service.
B. Configure DPC share access on a client.
C. Create a block storage pool.
D. Install DPC.

正解：A、C

質問 # 103
Single-choice Which one of the following descriptions about the trembling characteristics of Huawei Oceansor 9000 is incorrect?

A. Support setting quotas for file directories
B. quota is set based on user group
C. Quota can be set based on users
D. Support setting quotas on files

正解：D

質問 # 104
An engineer can use multiple common management software to configure, manage, and maintain Huawei converged storage. Which of the following statements is false about the software and corresponding functions?

A. SmartKit provides capabilities such as alarm reporting, file upload, and remote access.
B. The command-line interface (CLI) allows the engineer to allocate storage resources, manage users, manage data protection features, monitor device performance, and manage alarms.
C. DME IQ enables cloud-based management, remote maintenance, automatic service request creation, and prediction and prevention, comprehensively improving customers' O&M capabilities.
D. DeviceManager allows the engineer to allocate storage resources, manage users, manage data protection features, monitor device performance, and manage alarms.

正解：A

解説：
SmartKit is primarily a local maintenance and deployment tool used for device initialization, health checks, upgrades, and troubleshooting - not for alarm reporting or remote access. Alarm reporting and remote maintenance are functions provided by DME IQ, not SmartKit.

質問 # 105
Assume a government office purchases the Huawei OceanProtect Appliance. Which statement about the device initialization is false?

A. During network configuration, if the archive network and backup network are separate, the engineer needs to disable the function of reusing the backup network configuration.
B. The engineer needs to configure the Secure File Transfer Protocol (SFTP) service. If management data exists before the SFTP service is enabled, the management data file becomes invalid after the SFTP service is enabled.
C. The engineer needs to configure service logical ports before configuring networks. If there are two OceanProtect backup storage nodes, at least two IP addresses must be reserved from the backup service network segment.
D. If the engineer uses the Network Time Protocol (NTP) automatic synchronization mode to configure the device time in a firewall-enabled environment, port 123 must be enabled.

正解：C

解説：
During Huawei OceanProtect Appliance initialization, the engineer must first configure network settings before creating service logical ports. Logical ports are created after network configuration to enable communication for backup services.

質問 # 106
In the process of handling storage failures, which of the following principles should be followed ()

A. First common alarm, then individual alarm
B. High-level alarm first, then low-level alarm
C. Check the storage device first, and then check the business host
D. First locate the outside, then locate the inside

正解：A、B、C、D

質問 # 107
......

Huawei H13-624_V5.5 認定試験の出題範囲：

トピック	出題範囲
トピック 1	Storage Technology Trends: This section of the exam measures skills of a Data Center Specialist and covers the latest advancements in the storage industry. It focuses on emerging technologies that are shaping intelligent storage development, including trends like AI integration, green computing, and cloud-oriented storage evolution. Candidates are expected to understand how these trends influence storage planning and deployment in modern IT environments.
トピック 2	Basic Storage Technologies: This section of the exam measures the skills of a Storage Engineer and includes fundamental knowledge of storage systems. It covers key concepts such as intelligent storage architecture, RAID levels, storage networking, and widely used data protocols. The section also introduces the structure and function of SAN and NAS environments. A strong grasp of these basic technologies helps professionals support large-scale data infrastructure with efficiency and stability.
トピック 3	Huawei Intelligent Storage Products and Features: This section of the exam measuresthe skills of a Storage Administrator and focuses on Huawei’s intelligent storage solutions. It includes understanding product models, management interfaces, and advanced features like storage tuning and data protection. Candidates will explore how to manage system operations, optimize resource usage, and apply Huawei-specific technologies for secure and high-performance storage deployment.
トピック 4	Storage System O&M Management: This section of the exam measures the skills of a Storage Operations Specialist and covers the daily operational management of Huawei storage systems. It emphasizes practical abilities in system monitoring, troubleshooting, fault handling, and health checks. The goal is to ensure smooth, reliable operations and reduce risks through proactive maintenance and efficient use of Huawei’s O&M tools.