[2026年最新] 高合格率な300-715テストアンサーかつCisco 300-715テストPDF
完璧300-715問題集試験問題と解答でパス保証されます
Cisco 300-715試験は、Cisco ISEの実装と構成のスキルを検証するために、ネットワークプロフェッショナルにとって重要なステップです。この認定は、ネットワークセキュリティの分野でキャリアを進めたいプロフェッショナルにとって貴重な資産です。
Cisco 300-715認定試験は、ISEの展開、構成、および管理に関連する幅広いトピックをカバーする包括的なテストです。候補者は、ネットワークセキュリティの原則、アクセス制御ポリシー、認証および認証プロトコルを確実に理解することが期待されています。また、一般的なISE関連の問題をトラブルシューティングし、スイッチ、ルーター、ファイアウォールなどのネットワークインフラストラクチャコンポーネントを十分に理解できる必要があります。 Cisco 300-715試験に合格することは、ネットワークのセキュリティとアクセス制御のキャリアを前進させようとしているITの専門家にとって重要なマイルストーンです。
質問 # 161
Drag the descriptions on the left onto the components of 802.1X on the right.
正解：
解説：
質問 # 162
What is a function of client provisioning?
- A. Client provisioning checks the existence, date, and versions of the file on a client.
- B. Client provisioning ensures an application process is running on the endpoint.
- C. Client provisioning checks a dictionary attribute with a value.
- D. Client provisioning ensures that endpoints receive the appropriate posture agents.
正解：D
解説：
https://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_client_prov.html#:~:text=After%20Cisco%20ISE%20classifies%20a,packages%20and%20profiles%2C%20if%20necessary.
質問 # 163 
Refer to the exhibit. In which scenario does this switch configuration apply?
- A. when passing IP phone authentication
- B. when preventing users with hypervisor
- C. when allowing multiple IP phones to be connected
- D. when allowing a hub with multiple clients connected
正解：D
解説：
https://www.linkedin.com/pulse/mac-authentication-bypass-priyanka-kumari#:~:text=Multi%
2Dauthentication%20host%20mode%3A%20You,allows%20multiple%20source%20MAC%20addresses.
質問 # 164
An engineer is implementing Cisco ISE and needs to configure 802.1X. The port settings are configured for port-based authentication. Which command should be used to complete this configuration?
- A. authentication port-control auto
- B. dot1x system-auth-control
- C. dot1x pae authenticator
- D. aaa authentication dot1x default group radius
正解：D
質問 # 165
An engineer must use Cisco ISE profiler services to provide network access to Cisco IP phones that cannot support 802.1X. Cisco ISE is configured to use the access switch device sensor information system-description and platform-type to profile Cisco IP phones and allow access. Which two protocols must be configured on the switch to complete the configuration? (Choose two.)
- A. CDP
- B. STP
- C. LLDP
- D. EAPOL
- E. SNMP
正解：A、C
質問 # 166
A network administrator is currently using Cisco ISE to authenticate devices and users via
802.1X. There is now a need to also authorize devices and users using EAP-TLS.
Which two additional components must be configured in Cisco ISE to accomplish this? (Choose two.)
- A. Network Device Group
- B. Certificate Authentication Profile
- C. Common Name attribute that maps to an identity store
- D. EAP Authorization Profile
- E. Serial Number attribute that maps to a CA Server
正解：B、D
解説：
Certificate Authentication Profile: A Certificate Authentication Profile needs to be configured in Cisco ISE. This profile specifies the requirements for client certificates, such as certificate types, acceptable certificate authorities (CAs), and other certificate validation criteria.
EAP Authorization Profile: An EAP Authorization Profile must be configured in Cisco ISE. This profile defines the authorization policies and access privileges for devices and users authenticated using EAP-TLS. It specifies the network resources, VLAN assignments, and other attributes that should be applied to the authenticated devices and users.
質問 # 167
An engineer is configuring web authentication using non-standard ports and needs the switch to redirect traffic to the correct port.
Which command should be used to accomplish this task?
- A. aaa group server radius proxy
- B. ip http port <port number>
- C. aaa group server radius
- D. permit tcp any any eq <port number>
正解：B
解説：
Section: Web Auth and Guest Services
質問 # 168
What occurs when a Cisco ISE distributed deployment has two nodes and the secondary node is deregistered?
- A. The primary node restarts
- B. Both nodes restart.
- C. The primary node becomes standalone
- D. The secondary node restarts.
正解：D
解説：
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/1-1-1/installation_guide/ise_install_guide/ise_deploy.html if your deployment has two nodes and you deregister the secondary node, both nodes in this primary-secondary pair are restarted. (The former primary and secondary nodes become standalone.)
質問 # 169
Which two default endpoint identity groups does cisco ISE create? (Choose two )
- A. end point
- B. Unknown
- C. whitelist
- D. blacklist
- E. profiled
正解：B、D、E
解説：
Default Endpoint Identity Groups Created for Endpoints Cisco ISE creates the following five endpoint identity groups by default: Blacklist, GuestEndpoints, Profiled, RegisteredDevices, and Unknown. In addition, it creates two more identity groups, such as Cisco-IP-Phone and Workstation, which are associated to the Profiled (parent) identity group. A parent group is the default identity group that exists in the system.
https://www.cisco.com/c/en/us/td/docs/security/ise/2-
4/admin_guide/b_ise_admin_guide_24/b_ise_admin_guide_24_new_chapter_010101.html#ID16
78
質問 # 170
A laptop was stolen and a network engineer added it to the block list endpoint identity group What must be done on a new Cisco ISE deployment to redirect the laptop and restrict access?
- A. Ensure that access to port 8444 is allowed within the ACL.
- B. Ensure that access to port 8443 is allowed within the ACL.
- C. Select DROP under If Auth fail within the authentication policy.
- D. Select DenyAccess within the authorization policy.
正解：A
解説：
https://www.cisco.com/c/en/us/td/docs/security/ise/1-3/admin_guide/b_ise_admin_guide_13
/b_ise_admin_guide_sample_chapter_010000.html
質問 # 171
An administrator is configuring TACACS+ on a Cisco switch but cannot authenticate users with Cisco ISE. The configuration contains the correct key of Cisc039712287. but the switch is not receiving a response from the Cisco ISE instance What must be done to validate the AAA configuration and identify the problem with the TACACS+ servers?
- A. Confirm the authorization policies are correct using the test aaa authorization admin drop legacy command.
- B. Test the user account on the server using the test aaa group radius server CUCS user admin pass <key> legacy command.
- C. Validate that the key value is correct using the test aaa authentication admin <key> legacy command.
- D. Check for server reachability using the test aaa group tacacs+ admin <key> legacy command.
正解：D
解説：
Reference:
https://medium.com/training-course-ccna-security-210-260/ccna-security-part-3-implementing-aaa-in-cisco-ios-4b13ab285f51
質問 # 172
Which two default guest portals are available with Cisco ISE? (Choose two.)
- A. central web authentication
- B. self-registered
- C. WIFI-access
- D. sponsored
- E. visitor
正解：B、D
質問 # 173
Refer to the exhibit:
Which command is typed within the CU of a switch to view the troubleshooting output?
- A. show authentication registrations
- B. show authentication interface gigabitethemet2/0/36
- C. show authentication sessions method
- D. show authentication sessions mac 000e.84af.59af details
正解：D
質問 # 174
Which RADIUS attribute is used to dynamically assign the Inactivity active timer for MAB users from the Cisco ISE node?
- A. session timeout
- B. radius-server timeout
- C. idle timeout
- D. termination-action
正解：C
解説：
Explanation
When the inactivity timer is enabled, the switch monitors the activity from authenticated endpoints. When the inactivity timer expires, the switch removes the authenticated session. The inactivity timer for MAB can be statically configured on the switch port, or it can be dynamically assigned using the RADIUS Idle-Timeout attribute
質問 # 175
Which two default endpoint identity groups does cisco ISE create? (Choose two )
- A. end point
- B. whitelist
- C. Unknown
- D. blacklist
- E. profiled
正解：D、E
解説：
Explanation
Default Endpoint Identity Groups Created for EndpointsCisco ISE creates the following five endpoint identity groups by default: Blacklist, GuestEndpoints, Profiled, RegisteredDevices, and Unknown. In addition, it creates two more identity groups, such as Cisco-IP-Phone and Workstation, which are associated to the Profiled (parent) identity group. A parent group is the default identity group that exists in the system.
https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/admin_guide/b_ise_admin_guide_24/b_ise_admin_guide
質問 # 176
Refer to the exhibit. An engineer is configuring a client but cannot authenticate to Cisco ISE.
During troubleshooting, the show authentication sessions command was issued to display the authentication status of each port.
Which command gives additional information to help identify the problem with the authentication?
- A. show authentication sessions interface Gi1/0/1 details
- B. show authentication sessions output
- C. show authentication sessions
- D. show authentication sessions Interface Gil/0/1 output
正解：A
質問 # 177
Drag the Cisco ISE node types from the left onto the appropriate purposes on the right.
正解：
解説：
Monitoring = provides advanced monitoring and troubleshooting tools that you can use to effectively manage your network and resources Policy Service = provides network access, posture, guest access, client provisioning, and profiling services. This persona evaluates the policies and makes all the decisions.
Administration = manages all system-related configuration and configurations that relate to functionality such as authentication, authorization, auditing, and so on pxGrid = shares context-sensitive information from Cisco ISE to subscribers
https://www.cisco.com/c/en/us/td/docs/security/ise/1-4/admin_guide/b_ise_admin_guide_14/b_ise_admin_guide_14_chapter_011.html#ID57
質問 # 178
An administrator wants to configure network device administration and is trying to decide whether to use TACACS+ or RADIUS. A reliable protocol must be used that can check command authorization. Which protocol meets these requirements and why?
- A. RADIUS because it runs over TCP.
- B. TACACS+ because it runs over UDP
- C. TACACS+ because it runs over TCP
- D. RADIUS because it runs over UDP
正解：C
解説：
TACACS+ can check command authorization with shell profile and command sets respectively.
質問 # 179
When setting up profiling in an environment using Cisco ISE for network access control, an organization must use non-proprietary protocols for collecting the information at layer 2. Which two probes will provide this information without forwarding SPAN packets to Cisco ISE? {Choose two.)
- A. DNS probe
- B. SNMP query probe
- C. RADIUS probe
- D. NetFlow probe
- E. DHCP SPAN probe
正解：B、C
解説：
Explanation
https://ciscocustomer.lookbookhq.com/iseguidedjourney/ISE-profiling-design
質問 # 180
Which two actions occur when a Cisco ISE server device administrator logs in to a device?
(Choose two)
- A. The device queries the Cisco ISE authorization server
- B. The device queries the internal identity store
- C. The device queries the external identity store
- D. The Cisco ISE server queries the external identity store.
- E. The Cisco ISE server queries the internal identity store
正解：D、E
解説：
https://www.cisco.com/c/en/us/td/docs/security/ise/2-
7/admin_guide/b_ise_27_admin_guide/b_ISE_admin_27_device_admin.html#concept_9B1DD5A
7AD9C445AAC764722E6E7D32A
The device administrator performs the task of setting up a device to communicate with the Cisco ISE server. When a device administrator logs on to a device, the device queries the Cisco ISE server, which in turn queries an internal or external identity store, to validate the details of the device administrator. When the validation is done by the Cisco ISE server, the device informs the Cisco ISE server of the final outcome of each session or command authorization operation for accounting and auditing purposes.
質問 # 181
An organization wants to improve their BYOD processes to have Cisco ISE issue certificates to the BYOD endpoints. Currently, they have an active certificate authority and do not want to replace it with Cisco ISE.
What must be configured within Cisco ISE to accomplish this goal?
- A. Add an OCSP profile and configure the root certificate authority as secondary.
- B. Create an SCEP profile to link Cisco ISE with the root certificate authority.
- C. Create a certificate signing request and have the root certificate authority sign it.
- D. Add the root certificate authority to the trust store and enable it for authentication.
正解：B
質問 # 182
An organization is adding new profiling probes to the system to improve profiling on Oseo ISE The probes must support a common network management protocol to receive information about the endpoints and the ports to which they are connected What must be configured on the network device to accomplish this goal?
- A. ICMP
- B. WCCP
- C. ARP
- D. SNMP
正解：D
解説：
https://community.cisco.com/t5/security-documents/ise-profiling-design-guide/ta-p/3739456#toc-hId-790343135
質問 # 183
What is a function of client provisioning?
- A. Client provisioning checks the existence, date, and versions of the file on a client.
- B. Client provisioning ensures an application process is running on the endpoint.
- C. Client provisioning checks a dictionary attribute with a value.
- D. Client provisioning ensures that endpoints receive the appropriate posture agents.
正解：D
解説：
Reference:
https://www.cisco.com/c/en/us/td/docs/security/ise/1-2/user_guide/ise_client_prov.html#:~:text=After%20Cisco%20ISE%20classifies%20a,packages%20and%20profiles%2C%20if%20necessary.
質問 # 184
An administrator enables the profiling service for Cisco ISE to use for authorization policies while in closed mode. When the endpoints connect, they receive limited access so that the profiling probes can gather information and Cisco ISE can assign the correct profiles. They are using the default values within Cisco ISE. but the devices do not change their access due to the new profile. What is the problem'?
- A. The default profiler configuration is set to No CoA for the reauthentication setting
- B. The profiler feed is not downloading new information so the profiler is inactive
- C. In closed mode, profiling does not work unless CDP is enabled.
- D. The profiling probes are not able to collect enough information to change the device profile
正解：A
質問 # 185
......
300-715試験問題高合格率な300-715問題集PDF：https://www.jpntest.com/shiken/300-715-mondaishu
300-715のPDF問題集最近更新された問題：https://drive.google.com/open?id=1W74v5diyZHzF393RjIlSgmdQ_-NpgLtb