[2026年02月] 最新のASQ Certification CSSBB試験解答豪華セット問題集
ASQコンテンツをマスターしてCSSBB試験合格保証つき問題集！
質問 # 191
On a _________________ one can see a pattern from the graphed points such that conclusions can be drawn about the largest family of Variation.
- A. Poisson Chart
- B. Weighted Scale
- C. X-Y Matrix
- D. Multi-Vari Chart
正解：D
質問 # 192
This will be a:
- A. right-tail test
- B. left-tail test
- C. two-tail test
正解：A
質問 # 193
Fractional Factorial designs are used to reduce the ____________ because the number of runs has been lowered.
- A. Number of data measurement points
- B. Time and cost of experiments
- C. Number of people involved
- D. Output summary
正解：B
質問 # 194
Special Cause Variation falls into which two categories?
- A. Attribute & Discreet
- B. Short Term & Long Term
- C. Assignable & Pattern
- D. Natural & Unnatural
正解：C
質問 # 195
In a good Measurement System the most variation will be with part-to-part measurements. What should you do if the majority of variation is associated with the Gage R&R assuming the gage is technically capable?
- A. Focus on trimming the Part-to-Part variation
- B. Focus on fixing the Repeatability and Reproducibility of the measurement device
- C. Purchase a new machine
- D. Run another MSA test with the machine
正解：B
質問 # 196
At the very initiation of a project a Belt must develop a concise _______________ that states at a high level the area of concern and why it is important this issue be improved.
- A. Project Doctrine
- B. Management Justification
- C. Process Owner Disclosure
- D. Business Case
正解：B
質問 # 197
A Lean Six Sigma project is attempting to reduce inventory days. The Process Capability will be monitored as part of the Control Phase to track the sustainability of the improvement.
Which distribution type is best used for performing the Capability Analysis?
- A. Exponential Distribution
- B. Gaussian Distribution
- C. Logistic Distribution
- D. Normal Distribution
- E. Weibull Distribution
正解：E
質問 # 198
(Refer to the previous problem) To estimate the within treatment variance the experimenters would calculate the variances of:
- A. the five replications for each run
- B. all 80 readings
- C. the runs for which a factor is at its lowest level
正解：A
質問 # 199
Kaizens or Kaikakus and Six Sigma projects are intended to create breakthrough, significant process improvement versus minor, incremental improvements.
- A. True
- B. False
正解：A
質問 # 200
SCENARIO A Six Sigma team is measuring the moisture content of corn starch as it leaves the conveyer belt of a dryer. They collect one sample four cups of starch at times indicated in the chart at fixed locations labeled A, B, C, and D across the end of the belt. See the diagram below.
Find the sample linear correlation coefficient and the sample coefficient of determination for the data in problem VI.11.
- A. 0.49, 0.24
- B. 0.74, 0.55
- C. 0.33, 0.11
- D. 0.83, 0.69
正解：A
質問 # 201
Sally and Sara sell flower pots at their garage sale. Martha motivates Rose mentioning that they will sell a minimum of 16 pots per day if the outside temperature exceeds 60o F. From a sample, whose population is assumed to follow a Normal Distribution, taken for 30 days at 60 degrees or more an average of 15.2 pots per day were sold with a Standard Deviation of 0.6 pots.
What is the Z value for this sales process?
- A. 1.33
- B. 2.66
- C. 1.13
- D. 0.67
正解：A
質問 # 202
Find the value of (7) in the ANOVA table. Assume:
- A. 0<P<0.005
- B. 0.05<P<0.10
- C. 0.10<P<1
- D. 4.54
- E. 0.005<P<0.01
- F. 16.4
- G. 1.48
- H. 3.2
- I. 2.82
- J. 0.01<P<0.05
- K. 18.6
- L. 23.2
- M. 35.4
- N. 12.2
- O. 0.525
正解：D
質問 # 203
Fractional Factorial Designs are used to analyze factors to model the output as a function of inputs
if Hypothesis Testing in the Analyze Phase was inadequate to sufficiently narrow the factors that significantly impact the output(s).
- A. True
- B. False
正解：A
質問 # 204
If the probability that an event will occur is 0.83, then the probability that the event will not occur is:
- A. 0.07
- B. 0.17
- C. 83%
- D. 0.6889
- E. 1.20
正解：B
質問 # 205
Cost of Poor Quality (COPQ) can be classified as Visible Costs and Hidden Costs. All these items are Hidden Cost except __________________.
- A. Time Value of Money
- B. Lost Customer Loyalty
- C. Late Delivery
- D. Returns
正解：D
質問 # 206
Some of the sources for different types of error that can be quantified using Statistical Analysis are
___________________.
- A. Bias in sampling
- B. Error in measurement
- C. All of these answers are correct
- D. Error in sampling
正解：C
質問 # 207
For her injection molding project a Belt needed to track the percentage of defectives of a particular sample set so she used a ___________ to display the data?
- A. P Chart
- B. Xbar Chart
- C. C Chart
- D. Individual Chart
正解：A
質問 # 208
The quality leader responsible for the term Total Quality Management (TQM):
- A. none of the above
- B. Crosby
- C. Feigenbaum
- D. Ishikawa
- E. Juran
- F. Taguchi
正解：C
質問 # 209
The Hardware Store ordered ten lawn mower from the manufacturer and just before shipping the manufacturer found one to have a motor that wouldn't start. For the manufacturer this would be categorized as what type of cost?
- A. External Failure Costs
- B. Appraisal Costs
- C. Internal Failure Costs
- D. Prevention Costs
正解：C
質問 # 210
The operators of a manufacturing cell work out a more orderly arrangement for tool storage and establish a schedule to maintain cleanliness on a daily basis. These improvements are best described by which approach to problem solving?
- A. PDCA
- B. Poka yoke
- C. Re-engineering
- D. Kaizen
- E. 5S
正解：E
質問 # 211
......
あなたを合格させるASQ CSSBB試験専門問題集はここにある：https://www.jpntest.com/shiken/CSSBB-mondaishu
最新ASQ Certification CSSBB練習テストに最速準備問題をゲットせよ：https://drive.google.com/open?id=1Kr7Q4Rt2mvnd4MhKbZFY110ML1I58XGi