[2026年06月]更新のNutanix NCA-6.10試験練習テスト問題
更新された認定試験NCA-6.10問題集で練習テスト問題
質問 # 23
A Veeam Backup appliance, which uses iSCSI, must be deployed into an AHV-based cluster.
What must be configured to allow Veeam to connect to the Nutanix cluster?
- A. Prism Central
- B. Nutanix Objects
- C. Data Services IP
- D. Network Segmentation
正解：C
質問 # 24
An administrator needs to implement a disaster recovery plan. The company has two sites, each with its own Nutanix AHV cluster. Latency between the sites is 30ms.
Which built-in functionality in Prism Element could the administrator use to enable disaster recovery between the two clusters?
- A. Protection Policies
- B. Data Protection
- C. Recovery Plan
- D. Metro Cluster
正解：D
解説：
TheData Protectionfeature in Prism Element provides built-in disaster recovery capabilities by enabling asynchronous replication between Nutanix clusters. With a latency of 30ms between the two sites, asynchronous replication can ensure that data is replicated efficiently while adhering to recovery point objectives (RPO). The administrator can configure Protection Domains and Replication Targets to set up DR between the clusters.
* A. Recovery Plan:Incorrect, as Recovery Plans are part of Prism Central for orchestrated failover, not Prism Element.
* B. Protection Policies:Incorrect, as these are defined under Prism Central.
* C. Data Protection:Correct, as it enables disaster recovery via replication configurations in Prism Element.
* D. Metro Cluster:Incorrect, as Metro Cluster requires low latency (<5ms) and is not suitable for a
30ms latency scenario.
References:
Nutanix Data Protection and Disaster Recovery Guide.
Nutanix Bible: Data Protection Overview.
質問 # 25
For dark site clusters, what should be downloaded prior to running an LCM Inventory or updates?
- A. Nutanix Foundation Platform
- B. Nutanix Compatibility Bundle
- C. Nutanix Prism Central
- D. Nutanix Foundation
正解：B
解説：
Fordark site clusters, theNutanix Compatibility Bundlemust be downloaded prior to running LCM Inventory or updates. This bundle contains the necessary metadata and software binaries to perform inventory collection and upgrades in environments without internet connectivity.
* A. Nutanix Foundation:Incorrect, as Foundation is used for initial deployments, not for LCM updates.
* B. Nutanix Compatibility Bundle:Correct, as it contains the necessary files for offline LCM operations.
* C. Nutanix Prism Central:Incorrect, as this does not pertain to offline updates.
* D. Nutanix Foundation Platform:Incorrect, as this is not required for LCM Inventory or updates.
References:
Nutanix Life Cycle Manager Guide: Dark Site Configuration.
Nutanix Support Knowledge Base Article on Compatibility Bundles.
質問 # 26
An administrator wants to apply tags to licenses to simplify future renewals.
What interface would be used to complete this operation?
- A. License Inventory in the Support Portal
- B. Clusters in the Support Portal
- C. Prism Element Licensing
- D. Prism Central Licensing
正解：D
質問 # 27
At what time does LCM auto-inventory run by default?
- A. 3:00am
- B. 2:00am
- C. 4:00am
- D. 1:00am
正解：A
質問 # 28
When configuring a physical network switch in Prism Element, what information is required?
- A. SMTP Configuration
- B. SNMP Configuration
- C. NTP Configuration
- D. DNS Configuration
正解：B
解説：
When configuring a physical network switch in Prism Element,SNMP Configurationis required to enable monitoring and communication between the Nutanix cluster and the network switch. SNMP (Simple Network Management Protocol) is used to gather metrics and detect issues such as link failures or performance bottlenecks, ensuring the cluster operates efficiently with the physical network infrastructure.
:
Nutanix Network Management Guide - SNMP Configuration.
Nutanix Administration Guide - Configuring Switches for Monitoring
質問 # 29
An administrator of an AHV cluster needs to deploy a solution that will provide self-service network provisioning and overlapping IP addresses for true multi-tenant networking with VPCs.
Which product will satisfy this requirement?
- A. Flow Virtual Networking
- B. Nutanix Database Service
- C. Nutanix Kubernetes Platform
- D. Flow Network Security
正解：A
解説：
The correct answer isD. Flow Virtual Networking (FVN).
Flow Virtual Networking (FVN)is a Nutanix solution that enablesadvanced network virtualization, including:
* VPCs (Virtual Private Clouds)
* Overlapping IP address spaces
* Self-service network provisioning
* Multi-tenancy support
* Microsegmentation
FVN abstracts physical networking and allows tenants to manageisolated logical networks, providing cloud- like networking capabilities directly integrated with AHV.
Clarifications:
* A. Nutanix Kubernetes Platform (NKP):Orchestrates containers; does not provide virtualized network infrastructure.
* B. Flow Network Security:Focuses onmicrosegmentationandpolicy enforcement, not on VPC or L3 abstraction.
* C. Nutanix Database Service (NDB):Manages DBaaS; not related to networking.
Official Reference:
* Nutanix Flow Virtual Networking Tech Note
* Nutanix Documentation Portal - Flow Virtual Networking
* Excerpt: "Flow Virtual Networking provides VPCs, overlapping IPs, and self-service networking capabilities for secure multi-tenancy in Nutanix AHV clusters."
質問 # 30
Which Nutanix offering allows for extending an on-prem datacenter into the public cloud?
- A. Nutanix Data Services
- B. Nutanix Cloud Security
- C. Nutanix Cloud Clusters
- D. Nutanix Kubernetes Engine
正解：C
質問 # 31
An administrator needs to license a new cluster using Nutanix Cloud Platform Package Licensing.
How can the administrator satisfy this task?
- A. From the Nutanix Portal Licensing Summary page, click Manage Licenses and follow the specified process.
- B. From the My Nutanix Licensing Summary page, click Manage Licenses and follow the specified process.
- C. From Prism Central Licensing, follow the specified process.
- D. From Prism Element Licensing, follow the specified process.
正解：B
解説：
The correct answer isB. From the My Nutanix Licensing Summary page, click Manage Licenses and follow the specified process.
WithNutanix Cloud Platform (NCP) Package Licensing, licensing is centrally managed through theMy Nutanix Portal, where customers can:
* View license entitlements.
* Allocate or assign licenses to clusters.
* Download license files for upload via Prism Central or Prism Element.
The entry point for license assignment begins at theLicensing Summary page on the My Nutanix Portal.
Clarification of Other Options:
* A and D:Prism Central and Prism Element are used touploadlicenses, not assign or generate them.
* C:"Nutanix Portal" is a vague reference; the correct term is "My Nutanix".
Official Reference:
* Nutanix Licensing Guide - Cloud Platform Licensing
* Excerpt: "Log in to My Nutanix > Licensing Summary > Manage Licenses to assign and manage licenses for your clusters."
質問 # 32
In Prism Element, to which object are policies such as replication factor and storage efficiency settings applied?
- A. Virtual Machine
- B. Container
- C. vBlock
- D. Storage Pool
正解：B
解説：
In Prism Element, policies such as replication factor and storage efficiency settings are applied to Containers. A container is a logical grouping of one or more storage pools and defines the storage resources available to virtual machines. By applying policies to a container, you can set the replication factor, storage efficiency settings, and other storage-related settings for all of the virtual machines that are associated with that container. This is a fundamental concept in Nutanix Platform.
質問 # 33
What is the benefit of configuring user-defined Alert Policies in Prism Central?
- A. It customizes alert thresholds.
- B. It automates VM migrations.
- C. It reduces the frequency of system updates.
- D. It restricts network access for administrators.
正解：A
解説：
The correct answer isA. It customizes alert thresholds.
User-defined Alert PoliciesinPrism Centralallow administrators to definecustom alert conditionsand thresholdstailored to specific workload behaviors and operational requirements. This helps fine-tune monitoring by settingalert criteria for metrics such as CPU usage, memory utilization, IOPS, latency, etc., beyond the default system-generated alerts.
Key Capabilities Include:
* Define conditions usingpredefined metrics.
* Set thresholds andseverity levels.
* Associate alerts withspecific entitieslike VMs, hosts, or clusters.
* Integrate withemail, SNMP, or third-party tools.
Prism Central UI Navigation Path:
Alerts & Monitoring > Alert Policies > Create Alert Policy
Official Reference:
* Nutanix Administration Guide - Alerts and Monitoring
* Excerpt: "User-defined alert policies in Prism Central allow administrators to define custom thresholds for system metrics, enabling more granular and proactive monitoring."
* Nutanix Prism Central Guide - Alert Policies Section
Conclusion:Custom alert policies donotautomate VM migrations (C), limit access (B), or control update frequency (D). Only optionAreflects the actual function.
質問 # 34
What role does a Replication Factor of 2 or 3 play in ensuring data integrity and recovery?
- A. It reduces the need for offsite backup solutions.
- B. It accelerates data transfer to remote backup sites.
- C. It limits the scope of hardware failures during recovery operations.
- D. It ensures that multiple copies of data are available for recovery.
正解：D
質問 # 35
How many copies of the metadata are maintained within a Redundancy Factor 3 cluster?
- A. 0
- B. 1
- C. 2
- D. 3
正解：A
解説：
In aRedundancy Factor 3 (RF3)cluster,5 copies of the metadataare maintained to ensure data durability and cluster resiliency. RF3 provides fault tolerance against up to two simultaneous failures (e.g., node or disk failures) and requires more metadata copies to achieve this level of protection.
Other redundancy factors:
* RF2maintains 3 copies of metadata.
* RF3 requires at least 5 metadata copies to protect against additional failures.
References:
Nutanix Storage Concepts Guide - Redundancy Factors.
Nutanix Metadata Management Documentation.
質問 # 36
An administrator receives the alert:
What is the most likely cause?
- A. Another node in this cluster is already in maintenance mode.
- B. Other nodes in the cluster may not have enough resource available.
- C. This node in the cluster may not have enough resources available.
- D. This node in the cluster is already in maintenance mode.
正解：B
解説：
When a Nutanix cluster alert occurs, indicating maintenance mode issues, the most likely cause is that another node in the cluster is already in maintenance mode. Nutanix clusters enforce restrictions to prevent more than one node from entering maintenance mode simultaneously. This ensures the cluster can maintain resiliency and availability, adhering to the redundancy factor (RF) policy.
If another node is already in maintenance mode, the cluster cannot afford to have additional nodes enter maintenance without compromising data and service availability.
:
Nutanix Cluster Best Practices Documentation - Maintenance Mode.
Nutanix Alerts and Events Guide, accessible via Prism UI.
質問 # 37
An administrator is conducting updates in a Nutanix cluster and is being prompted for handling non- migratable VMs.
Which VM type is non-migratable?
- A. VMs marked as an Agent
- B. Memory Overcommitted
- C. VMs without NGT
- D. VMs O VMs with attached Volume Groups
正解：D
解説：
Non-migratable VMs in a Nutanix cluster typically include those with attached Volume Groups. This is because such VMs leverage direct-attached storage via iSCSI, which ties them to a specific host, preventing live migration to another host. Volume Groups provide block storage to applications, and the iSCSI protocol does not support live migration of such connections.
Here's a breakdown of the options:
* A. VMs without NGT:Nutanix Guest Tools (NGT) are used for guest-level integration but do not affect VM migratability.
* B. VMs marked as an Agent:This setting does not inherently make VMs non-migratable. It primarily affects roles and tasks within certain configurations.
* C. Memory Overcommitted:While memory overcommitment can affect performance, it does not make VMs non-migratable. Nutanix AHV handles memory allocation dynamically.
* D. VMs with attached Volume Groups:Correct answer, as the iSCSI connections used by Volume Groups are host-specific and cannot migrate seamlessly.
References:
Nutanix AHV Administration Guide: Nutanix Documentation
Nutanix Support KB Article on Volume Groups and VM Migration Limitations.
Nutanix University Certification Materials, NCP and NCM course modules.
質問 # 38
An administrator needs to ensure that the three VMs of an application cluster are never placed onto the same hypervisor by creating a VM- VM Anti-Affinity Policy.
What should the administrator use to complete this task?
- A. Ncli
- B. Prism Central
- C. acli
- D. Prism Element
正解：B
解説：
To create a VM-VM Anti-Affinity Policy ensuring VMs are not placed on the same hypervisor,Prism Central is required. Anti-affinity policies are cluster-wide configurations managed through Prism Central's policy- based interface, enabling placement rules to distribute workloads effectively.
Steps:
* Navigate toPrism Central > Policies.
* Create a new Anti-Affinity Policy.
* Select the VMs and configure the policy to ensure separation.
References:
Nutanix Prism Central Guide - Policy Management.
Nutanix Best Practices for VM Placement Policies.
質問 # 39
An administrator has spent time correcting specific issues that have been identified by NCC Health Checks in Prism Element.
How can just the checks that previously did not pass be executed again to confirm they are all resolved?
- A. Select Only Failed And Warning Checks.
- B. Select Run Check for each check worked.
- C. Run ncc health checks run_all.
- D. Run LCM Pre-Upgrade to trigger NCC Checks.
正解：A
質問 # 40
Which storage container option reduces the available storage to other containers?
- A. Advertised Capacity
- B. Capacity Deduplication
- C. Reserved Capacity
- D. Erasure Coding
正解：C
解説：
TheReserved Capacityoption in a storage container explicitly reserves a portion of cluster storage for that container. This reservation reduces the amount of storage available for other containers. Reserved Capacity ensures that specific workloads have guaranteed storage resources, preventing resource contention or overcommitment.
Other options:
* Advertised Capacity: Defines the storage limit displayed to users but does not reserve storage.
* Erasure Coding: Optimizes storage efficiency but does not reduce available capacity.
* Capacity Deduplication: Reduces space consumption by eliminating duplicate data but does not affect other containers' storage.
:
Nutanix Storage Best Practices Guide.
Nutanix Prism UI Help - Storage Container Configuration.
WSZC
質問 # 41
An administrator has spent time correcting specific issues that have been identified by NCC Health Checks in Prism Element.
How can just the checks that previously did not pass be executed again to confirm they are all resolved?
- A. Select Only Failed And Warning Checks.
- B. Select Run Check for each check worked.
- C. Run ncc health checks run_all.
- D. Run LCM Pre-Upgrade to trigger NCC Checks.
正解：A
解説：
To rerun only the health checks that previously failed or issued warnings, the administrator can select theOnly Failed and Warning Checksoption in Prism Element. This targeted approach helps verify that resolved issues have been addressed without rerunning all checks unnecessarily.
Steps:
* Navigate toPrism Element > Health > NCC Checks.
* Filter forOnly Failed and Warning Checksand rerun them.
Other options:
* A. Run LCM Pre-Upgrade: Runs pre-upgrade checks, not related to health check validation.
* B. Runncc health_checks run_all: Executes all checks, not just failed ones.
* C. Select Run Check for each check worked: Requires manual execution for each check.
References:
Nutanix Administration Guide - Health Checks.
Nutanix Cluster Check (NCC) Documentation.
質問 # 42 
A custom alert policy is configured for a VM named Calm_3_8_VM to generate aWarningalert ifmemory usageexceeds90%or is below30%for10 minutes.
What action can be taken to prevent this alert policy from creating multiple alerts within a 48-hour period if the 90% threshold is crossed multiple times?
- A. Select highest value in Trigger alert if conditions persist for.
- B. Select the Auto resolve alerts checkbox and click Save.
- C. After alert occurs, uncheck Enable Policy box for 48 hours.
- D. Set Ignore all anomalies between to 90% and 100%.
正解：B
解説：
The correct answer isA. Select the Auto resolve alerts checkbox and click Save.
When an alert policy is configured based on astatic threshold, it will generate an alert each time the condition is met unless it has beenauto-resolvedor manually acknowledged. By enablingAuto resolve alerts, the system willautomatically clear the alertonce the metric falls back within the acceptable range. This preventsduplicate alertswhen the threshold is exceeded repeatedly within a short timeframe (e.g., multiple times over 48 hours).
Explanation of Incorrect Options:
* B (Disable policy):Not scalable or operationally sound.
* C (Ignore anomalies):Applies only to behavioral anomalies, not static thresholds.
* D (Trigger duration):Increases delay before alerting but does not suppress repeated alerts.
UI Location in Image:
#"Auto resolve alerts" is visible just below "Impact Type."
Official Reference:
* Nutanix Prism Central Guide - Alert Policies
* Excerpt: "Enable 'Auto resolve alerts' to ensure alerts are cleared automatically once conditions normalize, avoiding duplicate alerts."
質問 # 43
Which Nutanix offering allows for extending an on-prem datacenter into the public cloud?
- A. Nutanix Data Services
- B. Nutanix Cloud Security
- C. Nutanix Cloud Clusters
- D. Nutanix Kubernetes Engine
正解：C
解説：
Nutanix Cloud Clusters (NC2)enables extending on-premises datacenters into public cloud environments, such as AWS or Azure. This solution allows administrators to seamlessly migrate workloads, scale operations, and manage resources across hybrid cloud environments using a unified control plane.
* A. Nutanix Cloud Security:Incorrect, as this focuses on securing workloads in the cloud, not extending datacenters.
* B. Nutanix Cloud Clusters:Correct, as NC2 enables hybrid cloud functionality by extending on-prem clusters into the public cloud.
* C. Nutanix Kubernetes Engine:Incorrect, as this is used for container orchestration, not hybrid cloud extension.
* D. Nutanix Data Services:Incorrect, as this refers to storage and data management capabilities.
References:
Nutanix Cloud Clusters (NC2) Documentation.
Nutanix University: Hybrid Cloud Training.
質問 # 44
What type of NTP/time sources are recommended for Nutanix clusters?
- A. Windows time sources
- B. Internal NTP sources
- C. External ISP NTP sources
- D. Rate-limited NTP sources
正解：B
解説：
The correct answer isB. Internal NTP sources.
Nutanix strongly recommends configuringreliable internal NTP sources(e.g., enterprise-managed NTP servers or domain NTP servers) to ensure:
* Time consistency across all nodes and CVMs
* Accurate logging, monitoring, authentication (e.g., Kerberos), and cluster operations
* Avoiding dependency onexternal/public NTPsources, which may berate-limited, unavailable, or blockedby firewalls Clarifications:
* A (Windows time sources):Generally discouraged unless they are configured to use a stratum 1/2 reliable upstream source.
* C (Rate-limited sources):Not recommended; can result in dropped or inconsistent time updates.
* D (External ISP NTP):Not preferred for production clusters due to reliability concerns.
Prism UI Navigation Path:
Settings > NTP Servers
Official Reference:
* Nutanix Best Practices Guide - NTP Configuration
* Excerpt: "Use reliable and consistent internal NTP servers for all Nutanix clusters to maintain time synchronization."
質問 # 45
Which option is supported by Nutanix for Data-at-Rest encryption?
- A. Data-only Encryption
- B. Storage Pool-only Encryption
- C. Cluster-only Encryption
- D. Software-only Encryption
正解：D
解説：
The correct answer isD. Software-only Encryption.
Nutanix supportsData-at-Rest Encryption (DARE)through bothhardware-basedandsoftware-based methods. Among the supported solutions,software-only encryptionis a widely used and officially supported method, especially whenSelf-Encrypting Drives (SEDs)are not in use.
Key facts about Nutanix DARE:
* Enables encryption of data written to physical media.
* Works at theCVM and controller layer, ensuring all I/O is encrypted before being persisted.
* Software-based encryptioncan be enabled via Prism Central or command-line usingNative Key Management (NKM)orexternal KMIP-compliant key managers.
* Hardware encryption (SED)is optional and not required for DARE.
Clarifications:
* A. Storage Pool-only Encryption: Not valid; encryption applies at thecluster level, not only to storage pools.
* B. Data-only Encryption: Ambiguous and not a Nutanix-supported term.
* C. Cluster-only Encryption: Misleading; encryption is applied to data at rest, not to the "cluster" object.
Prism UI Navigation Path:
Settings > Security > Encryption
Official Reference:
* Nutanix Security Guide - Data-at-Rest Encryption
* Nutanix Bible - Encryption Section
* Excerpt: "Nutanix supports software-only data-at-rest encryption using Native Key Management or external KMIP key managers, without requiring self-encrypting drives."
質問 # 46
An administrator wants to change from Redundancy Factor 2 to 3, but it is not allowed.
What must the administrator check?
- A. Check AOS version and upgrade, if needed.
- B. Check hardware availability of the nodes.
- C. Check that the cluster has five or more nodes.
- D. Check that the cluster has been properly licensed.
正解：C
質問 # 47
......
更新された検証済みのNCA-6.10問題集と解答で合格保証もしくは全額返金：https://www.jpntest.com/shiken/NCA-6.10-mondaishu
NCA-6.10のPDF問題とテストエンジンには78問があります：https://drive.google.com/open?id=1qlRyIoc_-hhQa25apW6mZcQ_oG4CW_zH