2V0-41.20認定の有効な試験問題集解答学習ガイド！（最新の95問題)
2V0-41.20問題集で時間限定！無料アクセスせよ
VMware 2V0-41.20 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
| トピック 6 |
|
| トピック 7 |
|
| トピック 8 |
|
| トピック 9 |
|
質問 # 28
Which two BGP configuration parameters can be configured in the VRF Lite gateways? (Choose two.)
- A. Route Distribution
- B. Local AS
- C. Graceful Restart
- D. BGP Neighbors
- E. Route Aggregation
正解：A、D
質問 # 29
Which two statements describe the characteristics of an Edge Cluster in NSX-T 3.0 Data Center? (Choose two.)
- A. can contain multiple types of edge nodes (VM or bare metal)
- B. can have a maximum of 8 edge nodes
- C. can have a maximum of 10 edge nodes
- D. must contain only one type of edge nodes (VM or bare metal)
- E. must have only active-active edge nodes
正解：A、C
質問 # 30
Which two choices are prerequisites to configure NSX-T on VDS? (Choose two.)
- A. vSphere Distributed Switch 7.0
- B. vSphere Distributed Switch 6.5
- C. MTU 1500
- D. MTU 1400
- E. MTU 1600
正解：A、E
質問 # 31
Which CLI command is used to disable SSH timeout on NSX Manger and NSX Edge nodes?
- A. set cli ssh timeout 0
- B. nsxcli ssh session on
- C. set esxcli ssh session off
- D. set cli-timeout 0
正解：D
質問 # 32
Which to steps must an NSX administrator take to integrate VMware Identity Manager in NSX-T to support role-based access control? (Choose two.)
- A. Enter the service URL, Client Secret, and SSL thumbprint in NSX Manager.
- B. Create a SAML authentication in VMware Identity Manager using the NSX Manager FQDN.
- C. Create an OAuth 2.0 client in VMware Identity Manager.
- D. Enter the Identity Provider (IdP) metadata URL in NSX Manager.
- E. Add NSX Manager as a Service Provider (SP) in VMware Identity Manager.
正解：A、C
質問 # 33
Which two statements are true for a Tier-1 Gateway? (Choose two.)
- A. owned and configured by the Tenant
- B. always configured in active-standby mode
- C. supports ECMP
- D. connects to physical networks
- E. owned and configured by Service Provider
正解：B、D
質問 # 34
Which statement is true about an alarm in a Suppressed state?
- A. An alarm can be suppressed for a specific duration in seconds.
- B. An alarm can be suppressed for a specific duration in minutes.
- C. An alarm can be suppressed for a specific duration in days.
- D. An alarm can be suppressed for a specific duration in hours.
正解：C
質問 # 35
An NSX administrator is using ping to check connectivity between VM1 running on ESXi1 to VM2 running on ESXi2. The ping tests fails. The administrator knows the maximum transmission unit size on the physical switch is 1600.
Which command does the administrator use to check the VMware kernel ports for tunnel end point communication?
- A. vmkping ++netstack=vxlan-d -s 1572 <destination IP address>
- B. esxcli network diag ping -H <destination IP address>
- C. esxcli network diag ping -I vmk0 -H <destination IP address>
https://kb.vmware.com/s/article/1003728 - D. vmkping ++netstack=geneve -d -s 1572 <destination IP address>
正解：A
質問 # 36
How is the RouterLink port created between a Tier-1 Gateway and Tier-0 Gateway?
- A. Manually create a Logical Switch and connect to bother Tier-1 and Tier-0 Gateways.
- B. Automatically created when Tier-1 is connected with Tier-0 from NSX UI.
- C. Automatically created when Tier-1 is created.
- D. Manually create a Segment and connect to both Tier-1 and Tier-0 Gateways.
正解：B
質問 # 37
Which CLI command does an NSX administrator run on the NSX Manager to generate support bundle logs if the NSX UI is inaccessible?
- A. get support-bundle file vcpnv.tgz
- B. vm-support
- C. set support-bundle file vcpnv.tgz
- D. esxcli system syslog config logger set --id=nsxmanager
正解：B
質問 # 38
Which command is used to change the NSX CU administrator password?
- A. set user admin password <password> old-password <old-password>
- B. set user administrator password <old-password> <new-password>
- C. set user admin password <old-password> <new-password>
- D. set user administrator password <password> old-password <old-password>
正解：A
解説：
To change the password of an account run: set user admin password my-new-pwd old-password my-old-pwd
質問 # 39
Which discovery protocol is supported for hypervisor transport nodes?
- A. Cisco Discovery Protocol
- B. Adobe Real-time CDP
- C. Link Layer Discovery Protocol
- D. Neighbor Discovery Protocol
正解：C
質問 # 40
A customer has a network where BGP has been enabled and the BGP neighbor is configured on the Tier-0 Gateway. A NSX-T Data Center administrator used the get logical-routers command to retrieve this information:
Which two commands must be executed to check BGP neighbor status? (Choose two.)
- A. sa-nsxedge-01(tier0_sr)> get bgp neighbor
- B. vrf 1
- C. sa-nsxedge-01(tier1_sr)> get bgp neighbor
- D. vrf 4
- E. sa-nsxedge-01(tier0_dr)> get bgp neighbor
- F. vrf 3
正解：A、F
質問 # 41
Refer to the exhibit.
Which NAT type must the NSX-T Data Center administrator create on the Tier-0 or Tier-1 Gateway to allow Web VM to initiate communication with public networks?
- A. Reverse NAT
- B. 1:1 NAT
- C. DNAT
- D. SNAT
正解：D
解説：
Explanation/Reference:
質問 # 42
Which CLI command would an administrator use to allow syslog on an ESXi transport node when using the esxcli utility?
- A. esxcli network firewall ruleset set -r syslog -e true
- B. esxcli network firewall ruleset -e syslog
- C. esxcli network firewall ruleset set -r sysloq -e false
Reference: https://docs.vmware.com/en/VMware-NSX-T-Data-Center/2.2/nsxt_22_troubleshoot.pdf - D. esxcli network firewall ruleset set -a -e false
正解：A
質問 # 43
......
VMware 2V0-41.20試験実践テスト問題：https://www.jpntest.com/shiken/2V0-41.20-mondaishu