AZ-800練習テスト問題解答には更新された237問があります
AZ-800問題集はWindows Server合格確定させる練習で237問があります
質問 # 49
You have an on-premises server named Server1 that runs Windows Server. You have an Azure virtual network that contains an Azure virtual network gateway. You need to connect only Server1 to the Azure virtual network What should you use?
- A. Azure Network Adapter
- B. Azure Extended Network
- C. an ExpressRoute circuit
- D. a Site-to-SiteVPN
正解：A
解説：
Reference:
https://docs.microsoft.com/en-us/windows-server/manage/windows-admin-center/azure/use-azure-network-adapter
質問 # 50
Your network contains an Active Directory domain named contoso.com. The domain contains the computers shown in the following table.
On Server3, you create a Group Policy Object (GPO) named GP01 and link GPOI to contoso.com. GP01 includes a shortcut preference named Shortcut1 that has item-level targeting configured as shown in the following exhibit.
To which computer will Shortcut1 be applied?
- A. Server3 only
- B. Computer1 and Server3 only
- C. Server1, Server2, and Server3 only
- D. Server2 and Server3 only
正解：A
質問 # 51
You need to meet the security requirements for passwords.
Where should you configure the components for Azure AD Password Protection? lo answer, drag the appropriate components to the correct locations. Each component may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE Each correct selection is worth one point.
正解：
解説：
Explanation
Graphical user interface Description automatically generated with medium confidence
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/authentication/concept-password-ban-bad-on-premises
質問 # 52
You need to configure the Group Policy settings to ensure that the Azure Virtual Desktop session hosts meet the security requirements. What should you configure?
- A. loopback processing in GPOl
- B. security filtering for the link of GPOl
- C. the Enforced property for the link of GP04
- D. loopback processing in 0PO4
- E. the Enforced property for the link of GP01
- F. security filtering for the link of GP04
正解：E
質問 # 53
Your network contains an Active Directory Domain Services (AD DS) domain named contoso.com.
The network contains the servers shown in the following table.
You plan to implement IP Address Management (IPAM).
You need to use the Group Policy based provisioning method for managed servers. The solution must support server discovery.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
正解：
解説：
質問 # 54
Task 10
You need to configure Hyper-V to ensure that running virtual machines can be moved between SRV1 and SRV2 without downtime.
You do NOT need to move any virtual machines at this time.
正解：
解説：
See the solution of this Task below
Explanation:
One possible solution to configure Hyper-V to ensure that running virtual machines can be moved between SRV1 and SRV2 without downtime is to use Live Migration. Live Migration is a feature of Hyper-V that allows you to move a running virtual machine from one host to another without any noticeable interruption of service. To set up Live Migration between SRV1 and SRV2, you need to perform the following steps:
On both SRV1 and SRV2, open Hyper-V Manager from the Administrative Tools menu or by typing virtmgmt.msc in the Run box.
In the left pane, right-click on the name of the server and select Hyper-V Settings.
In the Hyper-V Settings dialog box, select Live Migrations in the navigation pane.
Check the box Enable incoming and outgoing live migrations.
Under Authentication protocol, select the method that you want to use to authenticate the live migration traffic between the servers. You can choose either Kerberos or CredSSP. Kerberos does not require you to sign in to the source server before starting a live migration, but it requires you to configure constrained delegation on the domain controller. CredSSP does not require you to configure constrained delegation, but it requires you to sign in to the source server through a local console session, a Remote Desktop session, or a remote Windows PowerShell session. For more information on how to configure constrained delegation, see Configure constrained delegation.
Under Performance options, select the option that best suits your network configuration and performance requirements. You can choose either TCP/IP or Compression or SMB. TCP/IP uses a single TCP connection for the live migration traffic. Compression uses multiple TCP connections and compresses the live migration traffic to reduce the migration time and network bandwidth usage. SMB uses the Server Message Block (SMB) 3.0 protocol and can leverage SMB features such as SMB Multichannel and SMB Direct. For more information on how to choose the best performance option, see Choose a live migration performance option.
Under Advanced Features, you can optionally enable the Use any available network for live migration option, which allows Hyper-V to use any available network adapter on the source and destination servers for live migration. If you do not enable this option, you need to specify one or more network adapters to be used for live migration by clicking on the Add button and selecting the network adapter from the list. You can also change the order of preference by using the Move Up and Move Down buttons.
Click OK to apply the settings.
Now, you have configured Hyper-V to enable live migration between SRV1 and SRV2. You can use Hyper-V Manager or Windows PowerShell to initiate a live migration of a running virtual machine from one server to another.
Topic 1, Fabrikam inc.
Overview
This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more Information about the scenario that is described in the case study. Each question is independent of the other questions in this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next section of the exam. After you begin a new section, you cannot return to this section.
To start the case study
To display the first question in this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements, if the case study has an All Information tab. note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.
Overview
Fabrikam, Inc. Is a manufacturing company that has a main office In New York and a branch office in Seattle.
On-premises Servers
The on-premises network contains servers that run Windows Server as shown in the following table.
DC1 hosts all the operation master roles.
WEB1 and WEB2 run an Internet Information Services (IIS) web app named Webapp1.
On-premises Network
The New York and Seattle offices are connected by using redundant WAN links.
The client computers in each office get IP addresses from their local DHCP server.
DHCP! contains a scope named Scope1 that has addresses for the New York office. DHCP2 contains a scope named Scope2 that has addresses for the Seattle office.
Group Policy Object (GPOs)
The cwp.fabrikam.com domain contains the organizational units (OUs) and custom Group Policy Objects (GPOs) shown in the following table.
Requirements:
Fabrikam Identifies the following planned changes:
* Create a single Azure subscription named Sub1 that will contain a single Azure virtual network named Vnet1.
* Replace the WAN links between the Seattle and New York offices by using Azure Virtual WAN and ExpressRoute. Both on-premises offices will be connected to Vnet1 by using ExpressRoute.
* Create three Azure file shares named newyorkfiles, seattfefiles, and companyfiles.
* Create a domain controller named dc3.corp.fabrikam,com in Vnet1.
* Deploy an Azure Virtual Desktop host pool lo Vnet1. The Azure Virtual Desktop session hosts will be hybrid Azure AD joined.
* License all servers for Microsoft Defender for servers.
* Use Azure Policy to enforce configuration management policies on the servers in Azure and on-premises.
Networking Requirements
Fabrikam identifies the following security requirements:
* Apply GP04 to the Azure Virtual Desktop session hosts. Ensure that Azure Virtual Desktop user sessions lock after being idle for 10 minutes. Users must be able to control the lockout lime manually from their client computer.
* Ensure that server administrators request approval before they can establish a Remote Desktop connection to an Azure virtual machine. If the request is approved, the connection must be established within two hours.
* Prevent user passwords from containing all or part of words that are based on the company name, such as Fab. fabrikam or fsbr! |.
* Ensure that all instances of Webapp1 use the same service account. The password of the service account must change automatically every 30 days.
* Prevent domain controllers from directly contacting hosts on the internet.
File Sharing Requirements
You need to configure the synchronization of Azure files to meet the following requirements:
* Ensure that seattlefiles syncs to FS2.
* Ensure that newyorkfiles syncs to FS1.
* Ensure that companyfiles syncs to both FS1 and FS2.
質問 # 55
You haw? a server named Host1 that has the Hyper-V server role installed. Host! hosts a virtual machine named VM1.
You have a management server named Server! that runs Windows Server. You remotely manage Host1 from Server1 by using Hyper-V Manager.
You need to ensure that you can access a USB hard drive connected to Server1 when you connect to VM1 by using Virtual Machine Connection.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. From Virtual Machine Connection, switch to a basic session.
- B. From Disk Management on Host1. attach a virtual hard disk.
- C. From Disk Management on Host1, select Rescan Disks
- D. From Virtual Machine Connection select Show Options and then select the USB hard drive.
- E. From the Hyper-V Settings of Host1, select Allow enhanced session mode
正解：D、E
解説：
Reference:
https://docs.microsoft.com/en-us/windows-server/virtualization/hyper-v/learn-more/use-local-resources-on- hyper-v-virtual-machine-with-vmconnect
質問 # 56
You have on-premises servers that run Windows Server as shown in the following table.
You have an Azure file share named share1 that stores two files named File2.docx and File3.docx.
You create an Azure File Sync sync group that includes the following endpoints:
share
D:\Folder1 on Server1
D:\Datal on Server2
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
正解：
解説：
Reference:
https://docs.microsoft.com/en-us/azure/storage/file-sync/file-sync-introduction
質問 # 57
You have an Azure virtual machine named Served that runs a network management application. Server1 has the following network configurations:
* Network interface: Nic1
* IP address. 10.1.1.1/24
* Connected to: VnetVSubnet1
You need to connect Server1 to an additional subnet named Vnet1/Subnet2.
What should you do?
- A. Modify the IP configurations of Nic1.
- B. Add a network interface to Server1.
- C. Create a private endpoint on Subnet2
- D. Add an IP configuration to Nic1.
正解：C
質問 # 58
Case Study 1 - Fabrikam, Inc
Overview
Fabrikam, Inc is a manufacturing company that has a main office in New York and a branch office in Seattle.
Existing Environment
On-premises Servers
The on-premises network contains servers that run Windows Server as shown in the following table.
DC1 hosts all the operation master roles.
WEB1 and WEB2 run an Internet Information Services (IIS) web app named Webapp1.
On-premises Network
The New York and Seattle offices are connected by using redundant WAN links.
The client computers in each office get IP addresses from their local DHCP server.
DHCP1 contains a scope named Scope1 that has addresses for the New York office, DHCP2 contains a scope named Scope2 that has addresses for the Seattle office.
Identity Infrastructure
The network contains a single on-premises Active Directory Domain Services (AD DS) domain named corp.falbrikam.com. Currently, all the service accounts use individual domain user accounts.
All domain controllers have the DNS Server role installed and host a copy of the Active Directory integrated DNS zone of corp.fabrikam.com.
The corp.fabrikam.com AD DS domain syncs with an Azure Active Directory (Azure AD) tenant.
Group Policy Objects (GPOs)
The corp.fabrikam.com domain contains the organizational units (OUs) and custom Group Policy Objects (GPOs) shown in the following table.
Requirements
Planned Changes
Fabrikam identifies the following planned changes:
Create a single Azure subscription named Sub1 that will contain a single Azure virtual network named Vnet1.
Replace the WAN links between the Seattle and New York offices by using Azure Virtual WAN and FxpressRoute. Both on premises offices will be connected to Vnet1 by using ExpressRoute.
Create three Azure file shares named newyorkhiles, seattlefiles, and companyfiles.
Create a domain controller named dc3.corp.fabrikam.com in Vnet1.
Deploy an Azure Virtual Desktop host pool to Vnet1. The Azure Virtual Desktop session hosts will be hybrid Azure AD-joined.
License all servers for Microsoft Defender for servers.
Use Azure Policy to enforce configuration management policies on the servers in Azure and on- premises.
Networking Requirements
Fabrikam identifies the following networking requirements:
Implement Virtual WAN and ensure that all the network traffic between the sites uses Virtual WAN. All communications must occur over ExpressRoute.
If a DHCP server fails, ensure that the client computers can continue to receive their dynamic IP address and renew their existing lease.
Ensure that the resources in Vnet1 can resolve the names of the on-premises servers in the corp.fabrikam.com domain.
Security Requirements
Fabrikam identifies the following security requirements:
Apply GPO4 to the Azure Virtual Desktop session hosts. Ensure that Azure Virtual Desktop user sessions lock after being idle for 10 minutes. Users must be able to control the lockout time manually from their client computer.
Ensure that server administrators request approval before they can establish a Remote Desktop connection to an Azure virtual machine. If the request is approved, the connection must be established within two hours.
Prevent user passwords from containing all or part of words that are based on the company name, such as Fab, f@br1kAm or fabr!|.
Ensure that all instances of Webapp1 use the same service account. The password of the service account must change automatically every 30 days.
Prevent domain controllers from directly contacting hosts on the internet.
File Sharing Requirements
You need to configure the synchronization of Azure files to meet the following requirements:
Ensure that seattlefiles syncs to FS2.
Ensure that newyorkfiles syncs to FS1.
Ensure that companyfiles syncs to both FS1 and FS2.
Question
You need to implement a name resolution solution that meets the networking requirements.
Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point
- A. Configure the DNS Servers settings for Vnet1.
- B. Create an Azure DNS zone named corp.fabrikam.com.
- C. Create an Azure private DNS zone named corp.fabrikam.com.
- D. On DC3, install the DNS Server role.
- E. Enable autoregistration in the corp.fabrikam.com Azure private DNS zone.
- F. Create a virtual network link in the coip.fabrikam.com Azure private DNS zone.
- G. Configure a conditional forwarder on DC3.
正解：A、D
解説：
Virtual machines in an Azure virtual network receive their DNS configuration from the DNS settings configured on the virtual network. You need to configure the Azure virtual network to use DC3 as the DNS server. Then all virtual machines in the virtual network will use DC3 and their DNS server.
質問 # 59
You have on-premises servers that run Windows Server as shown in the following table.
You have an Azure file share named share1 that stores two files named File2.docx and File3.docx.
You create an Azure File Sync sync group that includes the following endpoints:
share
D:\Folder1 on Server1
D:\Datal on Server2
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
正解：
解説：
Reference:
https://docs.microsoft.com/en-us/azure/storage/file-sync/file-sync-introduction
質問 # 60
Your network contains an Active Directory Domain Services (AD DS) domain named adatum.com. The domain contains a server named Server1 and the users shown in the following table.
Server1 contains a folder named D:\Folder1. The advanced security settings for Folder1 are configured as shown in the Permissions exhibit. (Click the Permissions tab.)
Folder1 is shared by using the following configurations:
The share permissions for Share1 are shown in the following table.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
正解：
解説：
質問 # 61
Your on-premises network contains a single-domain Active Directory Domain Services (AD DS) forest. You have an Azure AD tenant named contoso.com. The AD DS forest syncs with the Azure AD tenant by using Azure AD Connect.
You need to ensure that users in the forest that have a custom attribute of NoSync are excluded from synchronization.
How should you configure the Azure AD Connect cloudFiltered attribute, and which tool should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
正解：
解説：
Explanation:
質問 # 62
You have an on-premises server named Server1 that runs Windows Server and has internet connectivity.
You have an Azure subscription.
You need to monitor Server1 by using Azure Monitor.
Which resources should you create in the subscription, and what should you install on Server1? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
正解：
解説：
Reference:
https://docs.microsoft.com/en-us/windows-server/manage/windows-admin-center/azure/azure-monitor
質問 # 63
Your network contains an on -premises Active Directory Domain Services (AD DS) domain named contoso.
com The domain contains the objects shown in the following table.
You plan to sync contoso.com with an Azure Active Directory (Azure AD) tenant by using Azure AD Connect You need to ensure that all the objects can be used in Conditional Access policies What should you do?
- A. Select the Configure Hybrid Azure AD join option.
- B. Change the scope o' Group1 and Group2 to Global
- C. Clear the Configure device writeback option.
- D. Change the scope of Group2 to Universal
正解：A
解説：
Hybrid Azure AD join needs to be configured to enable Computer1 to be used in Conditional Access Policies.
Synchronized users, universal groups and domain local groups can be used in Conditional Access Policies.
質問 # 64
You plan w deploy an Azure virtual machine that win run Windows Server. The virtual machine will host an Active Directory Domain Services (AD DS) domain controller and a drive named f: on a new virtual disk.
You need to configure storage foe the virtual machine. The solution must meet the following requirements
* Maximize resiliency for AD DS.
* Prevent accidental data loss.
How should you configure the storage? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
正解：
解説：
Explanation
質問 # 65
You have a disaggregated cluster deployment. The deployment contains a scale-out file server (SOFS) cluster that runs Windows Server and a compute duster that has the Hyper-V role enabled.
You need to implement Storage Quality of Service (QoS). The solution must ensure that you can control the bandwidth usage between the SOFS cluster and the Hyper-V cluster.
Which cmdlet should you run on each cluster? To answer, drag the appropriate cmdlets to the correct clusters. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
正解：
解説：
質問 # 66
Your on-premises network contains a server named Server1 and uses an IP address space of 192.168.10.0/24.
You have an Azure virtual network that contains a subnet named Subnet1. Subnet1 uses an IP address space of
192.168.10.0/24.
You need to migrate Server1 to Subnet1. You must use Azure Extended Network to maintain the existing IP address of Server1.
What is the minimum number of virtual machines that you should deploy? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point
正解：
解説：
Explanation
D:\mudassar\Untitled.jpg
質問 # 67
You have a server named Served that runs Windows Server and has the Hyper-V server role installed.
You build Just Enough Administration (JEA) role capabilities and session configuration files.
You need to limit which Hyper-V module cmdlets helpdesk users can use when administering Server1 remotely.
How should you complete the PowerShell command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
正解：
解説：
Explanation:
質問 # 68
Your network contains an Active Directory domain named contoso.com. The domain contains the computers shown in the following table.
On Server3, you create a Group Policy Object (GPO) named GP01 and link GPOI to contoso.com. GP01 includes a shortcut preference named Shortcut1 that has item-level targeting configured as shown in the following exhibit.
To which computer will Shortcut1 be applied?
- A. Server3 only
- B. Computer1 and Server3 only
- C. Server1, Server2, and Server3 only
- D. Server2 and Server3 only
正解：A
質問 # 69
Your on-premises network contains an Active Directory Domain Services (AD DS) domain. The domain contains the servers shown in the following table.
The domain controllers do NOT have internet connectivity.
You plan to implement Azure AD Password Protection for the domain.
You need to deploy Azure AD Password Protection agents. The solution must meet the following requirements:
* All Azure AD Password Protection policies must be enforced.
* Agent updates must be applied automatically.
* Administrative effort must be minimized.
What should you do? To answer select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
正解：
解説：
質問 # 70
You need to meet the technical requirements for the site links. Which users can perform the required tasks?
- A. Admin3 only
- B. Admin1 and Admin2 only
- C. Admin1, Adrrun2. and Admin3
- D. Admin1 only
- E. Admin1 and Admin3 only
正解：B
解説：
Membership in the Enterprise Admins group or the Domain Admins group in the forest root domain is required.
Topic 3, Datum Corporation
A Datum Corporation is a manufacturing company that has a main office in Seattle and two branch offices in Los Angeles and Montreal.
A Datum recently partnered with a company named Fabrikam, Inc.
Fabrikam is a manufacturing company that has a main office in Boston and a branch office in Orlando.
Both companies intend to collaborate on several joint projects.
The on-premises network of A. Datum contains an Active Directory Domain Services (AD DS) forest named adatum.com.
The forest contains two domains named adatum.com and east.adatum.com and the domain controllers shown in the following table.
The on-premises network of Fabrikam contains an AD DS forest named fabrikam.com.
The forest contains two domains named fabrikam.com and south.fabrikam.com.
The fabrikam.com domain contains an organizational unit (OU) named Marketing.
The adatum.com domain contains the servers shown in the following table.
HyperV1 contains the virtual machines shown in the following table.
All the virtual machines on HyperV1 have only the default management tools installed.
SSPace1 contains the Storage Spaces virtual disks shown in the following table.
A Datum has an Azure subscription that contains a Microsoft Entra tenant. Microsoft Entra Connect is configured to sync the adatum.com forest with Microsoft Entra ID.
The subscription contains the virtual networks shown in the following table.
The subscription contains the Azure Private DNS zones shown in the following table.
The subscription contains the virtual machines shown in the following table.
All the servers are in a workgroup.
The subscription contains a storage account named storage1 that has a file share named share1.
A Datum plans to implement the following changes:
* Sync Data1 to share1.
* Configure an Azure runbook named Task1.
* Enable Microsoft Entra users to sign in to Server1.
* Create an Azure DNS Private Resolver that has the following configurations:
o Name: Private1
o Region: West US
o Virtual network: VNet1
o Inbound endpoint: SubnetB
* Enable users in the adatum.com domain to access the resources in the south.fabrikam.com domain.
A Datum identifies the following technical requirements:
* The data on SSPace1 must be available always.
* DC2 must become the schema master if DC1 fails.
* VMS must be configured to enable per-folder quotas.
* Trusts must allow access to only the required resources.
* The users in the Marketing OU must have access to storage!
* Azure Automanage must be used on all supported Azure virtual machines.
* A direct SSH session must be used to manage all the supported virtual machines on HyperV1.
質問 # 71
Your network contains an Active Directory Domain Services (AD DS) domain named contoso.com.
The network contains the servers shown in the following table.
You plan to implement IP Address Management (IPAM).
You need to use the Group Policy based provisioning method for managed servers. The solution must support server discovery.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
正解：
解説：
質問 # 72
......
Microsoft AZ-800: Administering Windows Server Hybrid Core Infrastructure Examは、Windows Server環境でハイブリッドコアインフラストラクチャを管理するスキルと知識を検証したいプロフェッショナルを対象としています。この認定試験は、Windows Serverに経験を持ち、ハイブリッドクラウドソリューションの知識を拡大したいIT管理者、システムエンジニア、およびネットワーク管理者に最適です。
最新AZ-800試験問題にはリアルなAZ-800問題集があります：https://www.jpntest.com/shiken/AZ-800-mondaishu
最新AZ-800認証有効な試験問題集解答を試そう！：https://drive.google.com/open?id=1nIZkCYtt5YlLnp71R763mY01SvVLRIZx