DES-DD33のPDF問題集リアル2022最近更新された問題 [Q19-Q35]

Share

DES-DD33のPDF問題集リアル2022最近更新された問題

リリースEMC DES-DD33更新された問題PDF


EMC DES-DD33 認定試験の出題範囲:

トピック出題範囲
トピック 1
  • Monitor PowerProtect DD capacity and estimate storage burn rate
  • PowerProtect DD Concepts and Features
トピック 2
  • Recognize the packet flow in a typical backup environment with and without a Dell EMC PowerProtect DD system
  • Adjusting compression settings, deleting or reusing storage units, configuring replication and disaster recovery
トピック 3
  • Explain the key differentiators of the Dell EMC PowerProtect DD deduplication technology
  • Backup environments including integrated Dell EMC PowerProtect DD systems
トピック 4
  • Implement Dell EMC PowerProtect DD system with key technologies, including data security
  • Perform administrative tasks on Dell EMC PowerProtect DD systems with the Dell EMC Cloud Tier
トピック 5
  • Implement Dell EMC Data Domain system with key protocols, including NFS
  • CIFS, DD Boost, VTL, and NDMP
  • PowerProtect DD Implementation in Backup Environments and Integration with Application Software

 

質問 19
What is the correct sequence of operations used by the PowerProtect DD DIA in the end-to-end verification process?

正解:

解説:

 

質問 20
What is a main advantage of using DD Boost instead of CIFS or NFS for a backup?

  • A. DD Boost does not require administration credentials
  • B. DD Boost uses integrated network acceleration
  • C. Deduplication is distributed between the backup server and client
  • D. No requirement for an IP network to back up data

正解: C

解説:
Dell EMC Data Domain Boost software distributes parts of the deduplication process to the backup server(s) or application client(s), leaving the Data Domain system, powered by Intel® Xeon® processors, to focus its energy on determining what is unique and writing the new data to disk. With DD Boost, only the unique data has to travel from the backup server or client to the Data Domain system. DD Boost also gives the backup application control over replication

 

質問 21
A PowerProtect DD backup administrator wants to delegate some Operations to their Monitoring and Control team. The administrator wants to add a user to the Monitoring and Control team with limited access to only check the health of the PowerProtect DD appliance.
Which role must be applied to the new user?

  • A. User
  • B. Backup Operator
  • C. Limited Admin
  • D. Tenant Admin

正解: A

解説:
The User role provides read-only access to monitor activities and operations.

 

質問 22
Following best practices for a PowerProtect DD NFS environment, what is the recommended value for rsize and wsize?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

正解: A

 

質問 23
A backup administrator is tasked with verifying the compression savings of a PowerProtect DD9900.
Which compression algorithm will they see enabled by default?

  • A. lzw
  • B. gzfast
  • C. lz
  • D. gz

正解: B

解説:
The gzfast compression algorithm is the default local compression method used on all DD6900, DD9400, and DD9900 appliances.

 

質問 24
Which NDMP device is supported on a PowerProtect DD appliance?

  • A. NFS
  • B. VTL
  • C. CIFS
  • D. DD Boost

正解: B

解説:
A system can present itself as a file server, offering NFS, CIFS access over Ethernet; as a virtual tape library (VTL) over Fibre Channel; as an NDMP tape server over Ethernet; or as a disk target using application specific interfaces like DD Boost. DD VTL is qualified with leading open systems and IBMi enterprise backup applications.

 

質問 25
Where can daily information on system and MTree capacity be found?

  • A. Message log
  • B. Autosupport report
  • C. DDSM Health Overview
  • D. Support Bundle

正解: B

 

質問 26
How many hops should the fabric configuration be limited to when implementing the DD VTL?

  • A. 3 hops
  • B. 1 hop
  • C. 2 hops
  • D. 4 hops

正解: C

解説:
Maximum number of hops is two, that is, three DD systems. Directory-to-MTree migration supports backward compatibility up to two previous releases.

 

質問 27
A Spectrum Protect administrator is configuring VTL on PowerProtect DD.
Which tape driver type should they select?

  • A. L180
  • B. TS3500
  • C. L6000
  • D. L2000

正解: B

 

質問 28
What is the maximum number of concurrently active MTrees that are supported on any PowerProtect DD appliance with DDOS 7.3?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

正解: D

解説:

 

質問 29
What are the steps to configure the Retention Lock Compliance?

正解:

解説:

 

質問 30
What is the maximum capacity for a DDVE?

  • A. 64 TB
  • B. 96 TB
  • C. 256 TB
  • D. 128 TB

正解: C

解説:
DDVE supports 5TB - 256TB per instance

 

質問 31
An administrator is migrating their old cloud tier-enabled Data Domain to a new PowerProtect DD appliance with cloud tier. During migration, the administrator recognizes that file system cleaning on the source system is not possible.
What is the most likely cause of this behavior?

  • A. Migration will restrict all activities on source system
  • B. Migration will restrict all activities on both systems
  • C. Source system is running in restricted mode
  • D. Filesystem is disabled on source system

正解: A

 

質問 32
When using the DD VTL Tape Out to Cloud feature, which status will a tape show once it is in the cloud tier vault?

  • A. Archived
  • B. Offline
  • C. Offsite
  • D. Vaulted

正解: A

 

質問 33
Which statement is correct regarding backup flow without PowerProtect DD?

  • A. Only backup clients connect directly to tapes and save the backup
  • B. Only the backup server connects directly to tapes and saves the backup
  • C. Data is replicated between primary storage and tape storage
  • D. Both the backup server and backup clients connect directly to tapes and save the backup

正解: B

 

質問 34
Following best practices for a PowerProtect DD CIFS environment, what is the recommended SESSTIMEOUT value in seconds?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

正解: B

解説:
SESSTIMEOUT value from the default 45 seconds to 3600 seconds.

 

質問 35
......

DES-DD33問題集と練習テスト(55試験問題):https://www.jpntest.com/shiken/DES-DD33-mondaishu

ガイド(2022年最新)実際のEMC DES-DD33試験問題:https://drive.google.com/open?id=1YfOeGmW3OKoZCdgAVLcYS1krx9JaJgp3

弊社を連絡する

我々は12時間以内ですべてのお問い合わせを答えます。

オンラインサポート時間:( UTC+9 ) 9:00-24:00
月曜日から土曜日まで

サポート:現在連絡