PAS-C01認定ガイドPDFは100%カバー率でリアル試験問題が使える
合格させるPAS-C01試験にはリアル問題解答
質問 # 51
A company has moved an of its SAP workloads to AWS During peak business hours end users are reporting performance issues because work processes are going into PRIV mode on an SAP S/4HANA system An SAP support engineer indicates that SAP cannot provide support for this issue because some specific performance metrics are not available.
Which combination of actions must the company perform to comply with SAP support requirements? (Select THREE.)
- A. Enable SAP enhanced monitoring through a SAPOSCOL enhanced function
- B. Enable detailed monitoring for Amazon CloudWatch on each Amazon EC2 instance where SAP workloads are running
- C. integrate AWS Systems Manager with SAP Solution Manager to provide alerts about SAP parameter configuration drift
- D. Install configure and run the AWS Data Provider for SAP on each Amazon EC2 instance where SAP workloads are running
- E. Buy an SAP license from AWS Ensure that the SAP license is installed
- F. Select only an AWS Migration Acceleration Program (MAP) certified managed service provider (MSP)
正解：B、D、E
質問 # 52
A company is hosting its SAP workloads on AWS. An SAP solutions architect is designing high availability architecture for the company's production SAP S/4HANA and SAP BW/4HANA workloads. These workloads have the following requirements:
- Redundant SAP application servers that consist of a primary
application server (PAS) and an additional application server (AAS)
- ASCS and ERS instances that use a failover cluster
- Database high availability with a primary DB instance and a secondary DB instance How should the SAP solutions architect design the architecture to meet these requirements?
- A. Deploy ASCS and ERS cluster nodes in different subnets across two Availability Zones. Deploy the PAS instance and AAS instance in different subnets across two Availability Zones. Deploy the primary DB instance and secondary DB instance in different subnets across two Availability Zones.
Deploy all the components in the same VPC. - B. Deploy ASCS and ERS cluster nodes in different subnets across two Availability Zones. Deploy the PAS instance and AAS instance in different subnets across two Availability Zones. Deploy the primary DB instance and secondary DB instance in different subnets across two Availability Zones.
Deploy the ASCS instance, PAS instance, and primary DB instance in one VPC. Deploy the ERS instance, AAS instance, and secondary DB instance in a different VPC. - C. Deploy ASCS and ERS cluster nodes in different subnets within the same Availability Zone.
Deploy the PAS instance and AAS instance in different subnets within the same Availability Zone.
Deploy the primary DB instance and secondary DB instance in different subnets within the same Availability Zone. Deploy the ASCS instance, PAS instance, and primary DB instance in one VPC.
Deploy the ERS instance, AAS instance, and secondary DB instance in a different VPC. - D. Deploy ASCS and ERS cluster nodes in different subnets within the same Availability Zone.
Deploy the PAS instance and AAS instance in different subnets within the same Availability Zone.
Deploy the primary DB instance and secondary DB instance in different subnets within the same Availability Zone. Deploy all the components in the same VPC.
正解：A
質問 # 53
A company wants to implement SAP HANAonAWS with the Multi-AZ deployment option by using AWS Launch Wizard for SAP The solution will use SUSE Linux Enterprise High Availability Extension for the high availability deployment An SAP solutions architect must ensure that all the prerequisites are met The SAP solutions architect also must ensure that the user inputs to start the guided deployment of Launch Wizard are valid.
Which combination of steps should the SAP solutions architect take to meet these requirements? (Select TWO)
- A. Use a value for the PaceMakerTag parameter that is not used by any other Amazon EC2 instances in the AWS Region where the system is being deployed
- B. Before starting the Launch Wizard deployment set up the SUSE Linux Enterprise High Availability Extension network configuration and security group
- C. Ensure that the Virtual Address parameter is outside the VPC CIDR and is not being used in the route table that is associated with the subnets where primary and secondary SAP HANA instances will be deployed
- D. Ensure that the virtual hostname for the SAP HANA database that is used for the SUSE Linux Enterprise High Availability Extension configuration is not used in any other deployed accounts
- E. Before starting the Launch Wizard deployment create the underlying Amazon Elastic Block Store (Amazon EBS) volume types to use for SAP HANA data and log volumes based on the performance requirements
正解：A、C
解説：
In the document "SAP HANA on the AWS Cloud Quick Start Reference Deployment" (ARCHIVED) at the below URL, page 25, under "Requirements for Multi-AZ, Single-Node HA Scenarios," you will find the following
https://links.imagerelay.com/cdn/3404/ql/8327da608b7341f4ac2216c503116387/SAP-hana-on-AWS-cloud.pdf
####
SLES HAE and RHEL High Availability agents require that the Pacemaker tag and the overlay IP address you provide by setting deployment parameters can be uniquely identified. Therefore, you need to ensure the following:
- The value you provide for the PaceMakerTag parameter isn't being used by any other EC2 instances in your account, in the AWS Region where you are deploying the Quick Start.
- The IP address you provide for the VirtualIPAddress parameter is outside the VPC CIDR and isn't being used in the route table associated with the subnets where primary and secondary HANA instances will be deployed.
####
質問 # 54
A company wants to improve the RPO and RTO for its SAP disaster recovery (DR) solution by running the DR solution on AWS The company is running SAP ERP Central Component (SAP ECO on SAP HANA The company has set an RPO of 15 minutes and an RTO of 4 hours.
The production SAP HANA database is running on a physical appliance that has x86 architecture. The appliance has 1 TB of memory and the SAP HANA global allocation limit is set to 768 GB. The SAP application servers are running as VMs on VMware and they store data on an NFS file system The company does not want to change any existing SAP HANA parameters that are related to data and log backup for its on-premises systems.
What should an SAP solutions architect do to meet the DR objectives MOST cost-effectively?
- A. For the SAP HANA database change the log backup frequency to 5 minutes Move the data and log backups to Amazon S3 by using the AWS CLI or AWS DataSync Launch the SAP HANA database For the SAP application servers, export the VMs as AMis by using the VM import/Export feature from AWS For NFS file shares/sapmnt and usr-sap/trans/ establish real-time synchronization from DataSync to Amazon Elastic File System (Amazon EFS)
- B. For the SAP HANA database change the log backup frequency to 5 minutes Move the data and log backups to Amazon S3 by using AWS Storage Gateway File Gateway For the SAP application servers export the VMs as AMIs by using the VM Import'Export feature from AWS For NFS file shares /sapmnt and 'usr saplrans establish realtime synchronization from AWS DataSync to Amazon Elastic Foe System (Amazon EFS)
- C. For the SAP HANA database SAP application servers and NFS Me shares use CloudEndure Disaster Recovery to replicate the data continuously from on premises to AWS Use CloudEndure Disaster Recovery to launch target instances in the event of a disaster
- D. For the SAP HANA database use a smaller SAP certified Amazon EC2 instance Use SAP HANA system replication with ASYNC replication mode to replicate the data continuously from on premises to AWS For the SAP application servers use CloudEndure Disaster Recovery for continuous data replication For NFS file shares sapmnt and .'uv-sap'trans. establish real-time synchronization from AWS DataSync to Amazon Elastic File System (Amazon EFS)
正解：B
質問 # 55
A company is running an SAP ERP Central Component (SAP ECC) system on an SAP HANA database that is
10 TB m size The company rs receiving notifications about long-running database backups every day The company uses AWS Backint Agent for SAP HANA (AWS Backint agent) on an Amazon EC2 instance to back up the database An SAP NetWeaver administrator needs to troubleshoot the problem and propose a solution Which solution will help resolve this problem'?
- A. Check the UploadChanneiSize parameter for AWS Backint agent increase this value in the aws-backint-agent-config yaml configuration file based on the EC2 instance type and storage configurations
- B. Check the MaximumConcurrentFilesForRestore parameter tor AWS Backint agent Increase the parameter from 5 to 10 by using the aws-backint-agent-config yaml configuration file
- C. Ensure that the backups are compressed if necessary configure AWS Backint agent to compress the backups and send them to an Amazon S3 bucket
- D. Ensure mat AWS Backint agent is configured to send the backups to an Amazon S3 bucket over the internet Ensure that the EC2 instance is configured to access the internet through a NAT gateway
正解：D
質問 # 56
A company is running its on-premises SAP ERP Central Component (SAP ECC) workload on SAP HANA. The company wants to perform SAP S/4HANA conversion of the on-premises SAP ECC on SAP HANA landscape and migrate to AWS.
Which solutions can the company use to meet these requirements? (Choose two.)
- A. Perform SAP S/4HANA conversion of the SAP ECC on SAP HANA system by using SAP Software Update Manager (SUM). Migrate to AWS by using SAP Software Provisioning Manager.
- B. Perform SAP S/4HANA conversion of the SAP ECC on SAP HANA system by using SAP Software Update Manager (SUM). Migrate the database to AWS by using AWS Database Migration Service (AWS DMS). Deploy SAP S/4HANA application instances.
- C. Perform migration of the SAP ECC on SAP HANA system to AWS by using SAP HANA system replication for database migration and AWS Application Migration Service for migration of the SAP ECC application instances. Perform SAP S/4HANA conversion by using SAP Software Update Manager (SUM).
- D. Perform SAP S/4HANA conversion of the SAP ECC on SAP HANA system by using SAP Software Provisioning Manager. Migrate to AWS by using AWS Application Migration Service.
- E. Perform SAP S/4HANA conversion and migration of the SAP ECC on SAP HANA system to AWS by using SAP Software Update Manager (SUM) Database Migration Option (DMO) with System Move.
正解：C、E
質問 # 57
A company is using a multi-account strategy for SAP HANA and SAP BW 4HANA instances across development QA and production systems m the same AWS Region Each system is hosted m its own VPC The company needs to establish cross-VPC communication between the SAP systems.
The company might add more SAP systems m the future. The company must create connectivity across the SAP systems and hundreds of AWS accounts. The solution must maximize scalability and reliability.
Which solution will meet these requirements?
- A. Create a transit VPC that uses the hub-and-spoke model set up routing to use the transit VPC for communication between the SAP systems
- B. Create an AWS Transit Gateway in a central networking account Attach the transit gateway to the AWS accounts Set up routing and a network ACL to establish communication
- C. Set up VPC peering between the accounts Configure routing in each VPC to use the VPC peering links
- D. Create a VPC link for each SAP system Use the VPC links to connect the SAP systems
正解：B
解説：
Explanation
Create an AWS Transit Gateway in a central networking account and attach the transit gateway to the AWS accounts. This solution will meet the requirements as it will maximize scalability and reliability and provide connectivity between the SAP systems and hundreds of AWS accounts. Additionally, as more SAP systems might be added in the future, this solution will also be able to handle the increased load.
質問 # 58
A company needs to migrate its critical SAP workloads from an on-premises data center to AWS.
The company has a few source production databases that are 10 TB or more in size. The company wants to minimize the downtime for this migration.
As part of the proof of concept, the company used a low-speed, high-latency connection between its data center and AWS. During the actual migration, the company wants to maintain a consistent connection that delivers high bandwidth and low latency. The company also wants to add a layer of connectivity resiliency. The backup connectivity does not need to be as fast as the primary connectivity.
An SAP solutions architect needs to determine the optimal network configuration for data transfer.
The solution must transfer the data with minimum latency.
Which configuration will meet these requirements?
- A. Set up Amazon Elastic File System (Amazon EFS) file system storage between the on-premises data center and AWS. Configure a cron job to copy the data into this EFS mount. Access the data in the EFS file system from the target environment.
- B. Set up two redundant AWS Site-to-Site VPN connections for connectivity between the on-premises data center and AWS.
- C. Set up one AWS Direct Connect connection for connectivity between the on-premises data center and AWS. Add an AWS Site-to-Site VPN connection as a backup to the Direct Connect connection.
- D. Set up an AWS Direct Connect gateway with multiple Direct Connect connections that use a link aggregation group (LAG) between the on-premises data center and AWS.
正解：C
質問 # 59
A company is running SAP ERP Central Component (SAP ECC) with a Microsoft SQL Server database on AWS A solutions architect must attach an additional 1 TB Amazon Elastic Block Store (Amazon EBS) volume. The company needs to write the SQL Server database backups to this EBS volume before moving the database backups to Amazon S3 for long-term storage.
Which EBS volume type will meet these requirements MOST cost-effectively?
- A. General Purpose SSD (gp3)
- B. Cold HDD (sc1)
- C. Provisioned IOPS SSD (io3)
- D. Throughput Optimized HDD (st1)
正解：D
質問 # 60
A company uses an SAP application that runs batch jobs that ate performance sensitive. The batch jobs can be restarted safely The SAP application has sot application servers. The SAP application functions reliability as long as the SAP application availability remains greater than 60%. The company wants to migrate the SAP application to AWS. The company is using a duster with two Availability Zones How should the company distribute the SAP application servers to maintain system reliability?
- A. Distribute the SAP application servers equally across two Availability Zones
- B. Create an Amazon EC2 Auto Scaling group across two Availability Zones Set a minimum capacity value of 4.
- C. Distribute the SAP application servers equally across three partition placement groups
- D. Distribute the SAP application servers equally across three Availability Zones
正解：A
解説：
C is correct because distributing the SAP application servers equally across two Availability Zones provides system reliability by ensuring that at least three application servers are available in each Availability Zone. This meets the requirement that the SAP application availability remains greater than 60%. This will also provide an additional layer of redundancy and protection against a single point of failure. Reference: https://docs.aws.amazon.com/whitepapers/latest/sap-on-aws-technical-deployment-guide/high-availability.html https://docs.aws.amazon.com/whitepapers/latest/sap-on-aws-technical-deployment-guide/amazon-ec2.html
質問 # 61
A company has deployed SAP HANA in the AWS Cloud. The company needs its SAP HANA database to be highly available. An SAP solutions architect has deployed the SAP HANA database in separate Availability Zones in a single AWS Region. SUSE Linux Enterprise High Availability Extension is configured with an overlay IP address. The overlay IP resource agent has the following IAM policy:
During a test of failover, the SAP solutions architect finds that the overlay IP address does not change to the secondary Availability Zone.
Which change should the SAP solutions architect make in the policy statement for Sid oip1 to fix this error?
- A. Change the Action element to ec2:ReplaceRoute.
- B. Change the Action element to ec2:CreateRoute.
- C. Change the Action element to ec2:ReplaceTransitGatewayRoute.
- D. Change the Action element to ec2:ReplaceRouteTableAssociation.
正解：A
解説：
https://docs.aws.amazon.com/sap/latest/sap-hana/sap-hana-on-aws-cluster-configuration- prerequisites.html
質問 # 62
A company needs to migrate its SAP HANA landscape from an on-premises data center to AWS.
The company's existing SAP HANA database instance is oversized. The company must resize the database instance as part of the migration.
Which combination of steps should the company take to ensure that the target Amazon EC2 instance is sized optimally for the SAP HANA database instance? (Choose two.)
- A. Determine the peak memory utilization of the existing on-premises SAP HANA system.
- B. Determine the average memory utilization of the existing on-premises SAP HANA system.
- C. For the target system, select the smallest SAP certified EC2 instance that provides more memory than the current peak memory utilization.
- D. For the target system, select any SAP certified EC2 instance that provides more memory than the current average memory utilization.
- E. For the target system, select any current-generation EC2 memory optimized instance.
正解：A、C
解説：
https://docs.aws.amazon.com/sap/latest/sap-hana/migrating-hana-sizing.html
質問 # 63
A company's SAP solutions architect needs to design an architecture to deploy a highly available SAP S/4HANA application on AWS. The company requires the SAP NetWeaver ASAP ASCS components and the SAP HANA database components or the application to be highly available.
The company will operate the SAP NetWeaver ASCS, SAP NetWeaver PAS, and SAP HANA database components on separate Amazon EC2 instances. Each EC2 instance will run the Red Hat Enterprise Linux operating system.
The company's AWS account has a VPC with a CIDR block that uses the 10.0.0.0/24 address block. The VPC contains two subnets. Each subnet is assigned to a different Availability Zone.
The company has no other VPCs in this account, and the company has no other AWS accounts.
Which set of overlay IP addresses can the SAP solutions architect use to provide the required highly available architecture?
- A. Two overlay IP addresses: 192.168.0.50 for SAP ASCS and 192.168.0.54 for SAP HANA
- B. Two overlay IP addresses: 10.0.0.50 for SAP ASCS and 10.0.0.54 for SAP HANA
- C. Three overlay IP addresses: 192.168.0.50 for SAP ASCS, 192.168.0.52 for SAP ERS, and
192.168.0.54 for SAP HANA - D. Three overlay IP addresses: 10.0.0.50 for SAP ASCS, 10.0.0.52 for SAP ERS, and 10.0.0.54 for SAP HANA
正解：C
解説：
https://docs.aws.amazon.com/sap/latest/sap-hana/sap-oip-sap-on-aws-high-availability- setup.html
質問 # 64
A company is planning to migrate its SAP S/4HANAand SAP BW/4HANA workloads to AWS. The company is currently using a third-party solution to back up its SAP HANA database and application. The company wants to retire the third-party backup solution after the migration to AWS. The company needs a backup solution on AWS to manage its SAP HANA database and application backups. The solution must provide secure storage of backups and must optimize cost.
Which solution will meet these requirements?
- A. Use SAP HANA Studio, SAP HANA HDBSQL, and SAP HANA Cockpit to perform backups to local Amazon Elastic Block Store (Amazon EBS) volumes. Copy the backups to Amazon S3. Use AWS Backup to schedule application backups with AMIs or snapshots to Amazon S3.
- B. Use SAP HANA Cockpit to implement a backup policy and perform SAP HANA database backups to Amazon S3 with AWS Backint Agent for SAP HANA. Enable S3 encryption. Use AWS Backup with backup plans to perform application backups with AMIs or snapshots. Enable S3 encryption.
- C. Use SAP HANA Studio, SAP HANA HDBSQL, and SAP HANA Cockpit to perform backups to local Amazon Elastic Block Store (Amazon EBS) volumes. Enable EBS volume encryption. Use AWS Backup to perform application backups with AMIs or snapshots to Amazon S3. Enable S3 encryption.
- D. Use AWS Backup with backup plans to perform SAP HANA database backups to Amazon S3 with AWS Backint Agent for SAP HANA. Enable S3 encryption. Use AWS Backup with backup plans to perform application backups with AMIs or snapshots. Enable S3 encryption.
正解：D
解説：
https://aws.amazon.com/about-aws/whats-new/2023/04/aws-backup-support-sap-hana- databases-amazon-ec2/
質問 # 65
A company has an SAP Business One system that runs on SUSE Linux Enterprise Server 12 SP3. The company wants to migrate the system to AWS. An SAP solutions architect selects a homogeneous migration strategy that uses AWS Application Migration Service (CloudEndure Migration).
After the server migration process is finished, the SAP solutions architect launches an Amazon EC2 test instance from the R5 instance family. After a few minutes, the EC2 console reports that the test instance has failed an instance status check. Network connections to the instance are refused.
How can the SAP solutions architect solve this problem?
- A. Request an instance limit increase for the AWS Region where the test instance is being launched.
- B. Reboot the instance to initiate instance migration to another host.
- C. Install the missing drivers on the source system. Wait for the completion of migration synchronization. Launch the test instance again.
- D. Create a ticket for AWS Support that documents the test server instance ID. Wait for AWS to update the host of the R5 instance.
正解：C
質問 # 66
A company is implementing SAP HANA on AWS According 10 the company's security policy SAP backups must be encrypted Only authorized team members can have the ability to decrypt the SAP backups What is the MOST operationally efficient solution that meets these requirements?
- A. Configure AWS Backint Agent for SAP HANA to use AWS Key Management Service (AWS KMS) for SAP backups Create a key policy to grant decryption permission to authorized team members only
- B. Configure AWS Storage Gateway to transfer SAP backups from a file system to an Amazon S3 bucket Use an S3 bucket policy to grant decryption permission to authorized team members only
- C. Configure AWS Backint Agent for SAP HANA to use AWS Key Management Service (AWS KMS) for SAP backups Grant object ACL decryption permission to authorized team members only
- D. Configure AWS Backint Agent for SAP HANA to create SAP backups in an Amazon S3 bucket After a backup is created encrypt the backup by using client-side encryption Share the encryption key with authorized team members only
正解：A
解説：
Explanation
This is the most operationally efficient solution that meets the company's security policy requirements. AWS KMS is a service that enables you to create and manage encryption keys that are used to encrypt and decrypt data. By configuring AWS Backup Agent for SAP HANA to use AWS KMS for SAP backups, the company can ensure that the backups are encrypted at rest and that only authorized team members have the ability to decrypt them. The key policy allows the company to define which team members are authorized to access the key, so that it can be used to decrypt the backup. This approach is operationally efficient because it does not require the company to manually encrypt and decrypt backups, and it enables the company to manage access to the encryption key through IAM policies, without the need for sharing encryption keys.
質問 # 67
A company has deployed SAP workloads on AWS The AWS Data Provider for SAP is installed on the Amazon EC2 instance where the SAP application is running An SAP solutions architect has attached an IAM role to the EC2 instance with the following policy.
The AWS Data Provider for SAP is not returning any metrics to the SAP application. Which change should the SAP solutions architect make to the 1AM permissions to resolve this issued.
- A. Add the cloudwatch ListMetrics action to the policy statement with Sid AWSDataProvider1.
- B. Add the cloudwatch GetMetricStream action (o the policy statement with Sid AWSDataProvider
- C. Add the cloudwatch GetMetricStatrstics action to the policy statement with Sid AWSDataProvider1
- D. Add the cloudwatch DescribeAlarmsForMetric action to the policy statement with Sid AWSDataProvider
正解：A
質問 # 68
......
Amazon PAS -C01（AWS認定：SAP ON AWS -SPECIALTY）認定試験は、AWSプラットフォームでSAPアプリケーションの展開と管理の経験がある個人向けに設計されています。この認定試験では、AWSでSAPアプリケーションの構成、展開、維持に関する候補者の技術的知識と専門知識を検証します。
100%無料PAS-C01日常練習試験には142問があります：https://www.jpntest.com/shiken/PAS-C01-mondaishu
合格させるPAS-C01レビューガイド、信頼され続けるPAS-C01テストエンジン：https://drive.google.com/open?id=1TbocxmZjC9l4p9rrBgIxyR0wfWnlvcPG