準備できる500-920問題解答は無料更新されて100%試験合格保証 [2022]
問題集リアルなCisco 500-920試験問題 [更新されたのは2022年]
質問 15
When troubleshooting, which option is the primary uses of the SCOPE command?
- A. To access the log files on the virtual machines
- B. The SCOPE command is not helpful in this case
- C. To access the log files on the log server
- D. To access the log files that reside in a component
正解: D
質問 16
In Cisco UCS, there are several interfaces involved on the packet path from the vNIC through the adapter, IOM to finally reach Pi Which is the order of those interfaces, starting from the vNIC?
- A. HIF. SIF, VIF, UIF NIF
- B. VIF, UIF, HIF, NIF SIF
- C. VIF, UIF, HIF, SIR NIF
- D. HIF. NIF, UIF, VIF SIF
正解: C
質問 17
Which statement best describes managing Cisco UCS servers using NX-OS CLI on the Fabric Interconnects?
- A. The NX-OS CLI on the Fabric Interconnects allows you to change the connectivity configuration between the Fabric Interconnects and an upstream LAN switch.
- B. The NX-OS CLI on the Fabric Interconnects allows you to manage QoS parameters on the Fabric Interconnects and an upstream LAN switch
- C. The NX-OS CLI on the Fabric Interconnects allows you to view, but not change the connectivity configuration between the Fabric Interconnects and an upstream LAN switch.
- D. The NX-OS CLI on the Fabric Interconnects allows you to change the connectivity configuration between the servers and Fabric Interconnects
正解: A
質問 18
After installing a new UCS M4 server, which two Cisco Integrated Management Controller connectivity options do you have? (Choose two )
- A. Web Access
- B. In-band Access
- C. Out-of-Band Access
- D. SNMP
- E. XML API Access
正解: B,E
質問 19
What occurs that causes a Split Brain Issue with Fabric Interconnects?
- A. Manage configuration changes made with UCS Manager
- B. Both cluster links fail
- C. The subordinate Fabric Interconnect detects heartbeat failure and declares itself primary
- D. A quorum tie occurs that must be resolved by the SEEPROM
正解: C
質問 20
When booting up a Cisco UCS Server you want to see boot time diagnostic messages of the POST, what action is required for you to do so?
- A. Enable Quiet Boot on the Server's Service Profile
- B. Enable Quiet Boot on the Server's BIOS
- C. Restart the Server
- D. Disable Fast Boot on the Server's Service Profile
- E. Disable Fast Boot on the Server's BIOS
正解: A
質問 21
When server is booting from SAN, which command verifies the PLOGI sessions with the target?
- A. FCIist
- B. Lunlist
- C. FCMap
- D. Lunmap
正解: B
質問 22
Which ethernet port type is used when configuring UCS Fabric Interconnect connections to Cisco UCS C-series servers?
- A. Uplink Port
- B. Direct Connect Port
- C. Server Port
- D. Service Profile Port
正解: A
質問 23
If a Cisco UCS B-Series server fails to initialize, which method of access is required to troubleshoot?
- A. Use Cisco UCS Manager GUI to troubleshoot initialization
- B. Use KVM console to troubleshoot initialization
- C. Use direct console access to troubleshoot initialization
- D. Use Cisco UCS Manager API to troubleshoot initialization
正解: B
質問 24
What is the likely cause of an intermittent SAN Boot fails?
- A. Wrong boot order in the service profile
- B. LUN ID Mismatch
- C. FCoE used instead of FC
- D. Misconfigured SAN boot target in the boot policy of the service profile
正解: D
質問 25
Which statement is true when using SPAN for Fibre Channel (FC) Traffic?
- A. FC port on Cisco UCS 6238UP can be used as a SPAN source
- B. Any port can be used as a SPAN destination port Even if it is defined as Eth uplink port it will be automatically converted to FC uplink port
- C. When defining FC uplink port as the SPAN destination, system will automatically stop using that port as an uplink port
- D. For FC SPAN sessions we do not have to specifically enable the monitoring session
正解: A
質問 26
Which are two benefits of integrating Cisco UCS C-series servers with Cisco UCS Manager? (Choose two ) Cisco UCS Manager provides the ability to automatically update C-series firmware and device drivers from a single global interface.
- A. Cisco UCS Manager uses service profiles and resource pools to allow the deployment of multiple servers with a single common template
- B. Cisco UCS Manager is able to act as a common centralized management platform for both blade and rack servers in a single domain.
- C. Cisco UCS Manager provides the ability to manage C-series in multiple physical domains from a single global interface
- D. Cisco UCS Manager can automatically power on and off servers to scale elastically according to application performance demands
正解: B
質問 27
When it comes to pinning vNIC traffic from a UCS Server to the Fabric Interconnect uplink what configuration can you perform?
- A. You can configure Automatic Uplink Pinning. If an uplink interface fails on one Fabric Interconnect, the server will fail to the first available uplink on the other Fabric Interconnect
- B. You can configure Static Uplink Pinning. If an uplink interface fails on one Fabric Interconnect the server will fail to the matching uplink on the other Fabric Interconnect
- C. You can configure Automatic Uplink Pinning. If an uplink interface fails on one Fabric Interconnect the server will fail to the matching uplink on the other Fabric Interconnect
- D. You can configure Static Uplink Pinning. If an uplink interface fails on one Fabric Interconnect, the server will fail to the first available uplink on the same Fabric Interconnect
- E. You can configure Static Uplink Pinning. If an uplink interface fails on one Fabric Interconnect, the server will fail to the first available uplink on the other Fabric Interconnect
正解: A
質問 28
What is the result of enabling the Core File Exporter in UCS Manager?
- A. If a subsequent triggering event occurs, a core dump will be generated and sent by TFTP
- B. A core dump file will be immediately created and transmitted using HTTP protocol
- C. A core dump must be remotely activated by Cisco TAC.
- D. A core dump will immediately be generated and will be exported
正解: D
質問 29
Which two ports on a pair of Cisco Fabric Interconnects must be properly cabled for the pair to form a cluster? (Choose two )
- A. L2 > L1
- B. L1 > L1
- C. L2 > L2
- D. L1 > L2
正解: B,C
質問 30
Which statement is true regarding the UCS Manager GUI is showing "Overall Status Unassociated" in the General tab for a C-series server?
- A. The server has a service profile assigned, but has connectivity issues with UCS Manager
- B. The server has been properly connected, but has not been discovered by UCS Manager
- C. The server does not have a service profile assigned, but has been discovered by UCS Manager
- D. The server is not properly connected
正解: D
質問 31
......
500-920試験問題集、500-920練習テスト問題：https://www.jpntest.com/shiken/500-920-mondaishu