SAP C_THR92_2505問題集で必ず試験合格させる [Q42-Q60]

SAP C_THR92_2505問題集で必ず試験合格させる

C_THR92_2505試験問題（更新されたのは2025年）100%リアル問題解答

質問 # 42
You want to create a report that returns only employees who were born in 1961. You also want to enable the person who runs the report to specify a different birth year. How can you achieve this? Note: There are 2 correct answers to this question.
Select Date Options from the Toolbar. Set Date Type to Show All. Select Manage Run Time Filters from the Toolbar. Expand Personal Information table. Select Date of Birth column. Select OK.

• A. Select Date Options from the Toolbar. Set Date Type to Date Range (On Start Date). Set From date to 1
  /1/1961 and To date to 12/31/1961. Set Use Custom Columns. Select Date of Birth from Start Date Column. Set Selectable At Runtime.
• B. Select OK and then select Add. Expand Personal Information table and select Date of Birth. Select less than or equal to from the operator list. Set Custom filter date to 12/31/1961. Select OK.
• C. Select Date Options from the Toolbar. Set Date Type to As of Date. Set As of Date to 1/1/1961. Set Use Custom Columns. Select Date of Birth from Start Date Column. Select Date of Birth from End Date Column. Set Selectable At Runtime.
• D. Select Manage Query Filters. Expand Personal Information table and select Date of Birth. Select Greater than or equal to from the operator list. Set Custom filter date to 1/1/1961.

正解：C、D

解説：
To create a report that returns only employees born in 1961 and enable runtime customization:
* Option A:
* Use Manage Query Filters to specify the condition:
* Expand the Personal Information table and select the Date of Birth column.
* Set the filter operator to Greater than or equal to and input a custom date of 1/1/1961.
* Option D:
* Use Date Options from the Toolbar and select the following:
* Set Date Type to As of Date.
* Set the As of Date to 1/1/1961.
* Set Use Custom Columns, selecting Date of Birth for both the Start Date and End Date columns.
* Ensure the filter is marked Selectable at Runtime.

質問 # 43
You are using a pivot table in your canvas report but the report does NOT display the most recent data. What could be the reason?

• A. You are using a wrong People Scope.
• B. You are using a query with a static date filter.
• C. You are NOT using a template.
• D. You are using the percent of total option.

正解：B

解説：
* Issue with Static Date Filters:
* If the query uses a static date filter (e.g., a specific range like "January 1, 2023, to March 31,
2023"), the report will not reflect the most recent data as the filter restricts results to the defined date range.
* Resolution:
* Update the query to use dynamic date filters (e.g., "Last 30 Days" or "Current Year") to ensure the pivot table includes the latest data.

質問 # 44
The data source used by the two tables only displays current (active) employees. How would you configure a filter on the table End of Previous Year Headcount by Location to display data accurately?

Note: There are 2 correct answers to this question.

• A. Set the Range type to Offset.
• B. Set a filter on Hire Date (Range).
• C. Set a filter on Hire Date (Member).
• D. Set the Range type to Standard.

正解：A、B

解説：
* Understanding the Problem
* The data source displays only current (active) employees, so the table must filter records to show headcount at the end of the previous year.
* Explanation of Correct Answers
* B (Hire Date Range): Applying a range filter on the hire date ensures only employees who were active within the required timeframe are included.
* D (Offset Range Type): Using an offset type range adjusts the filter dynamically to capture the relevant period for the previous year.
* Why Other Options are Incorrect
* A (Standard Range Type): Does not allow for dynamic date adjustments.
* C (Hire Date Member): Members are static and not suited for dynamic date filtering.
References
* SAP SuccessFactors Story Reporting Time Filter Documentation

質問 # 45
A report consumer claims that a canvas report shared with them is NO longer available in Report Center.
Upon your investigation, you find the report has been deleted. You need to reproduce the report as quickly as possible. What action do you take?

• A. Create a new report and add orphaned pages. Share the report.
• B. Use the Recycle Bin to restore the Report.
• C. Use the Restore Deleted Report tool to restore the report.
• D. Contact SAP SuccessFactors support to request the report be restored.

正解：C

解説：
* Understanding Report Restoration
* SAP SuccessFactors provides the Restore Deleted Report tool to recover reports that have been unintentionally deleted from the Report Center. This is the fastest method to restore a deleted report.
* Why Other Options are Incorrect
* B (Create a new report and add orphaned pages): This is time-consuming and only useful if the report cannot be restored.
* C (Contact SAP Support): This is unnecessary as the Restore Deleted Report tool is available.
* D (Recycle Bin): The Recycle Bin does not exist for reports in SAP SuccessFactors.
References
* SAP SuccessFactors Report Center User Guide

質問 # 46
Why would you export report definitions? Note: There are 2 correct answers to this question.

• A. To support report version control
• B. To schedule reports for offline execution
• C. To move reports between company instances
• D. To distribute reports to report consumers

正解：A、C

解説：
* Move Reports Between Instances (A):
* Exporting report definitions allows administrators to transfer reports from a test instance to a production instance.
* Support Version Control (C):
* Exporting reports provides a way to maintain and track different versions of report definitions for auditing and updates.

質問 # 47
User A maintains a canvas report of employee contact information. User A leaves the company. Another report designer, user B, is assigned the responsibility to maintain the report, but currently CANNOT modify the report. How do you allow user B to modify only this report?

• A. Update the reports' sharing to include user
• B. Edit authorship of the report.
• C. Assign User B the Access All Reports permission.
• D. Edit user B's WFA Role configuration.

正解：A

解説：
* Ownership and Sharing of Canvas Reports
* Reports are owned by the user who created them. If User A leaves, the report sharing settings must be updated to give User B edit permissions.
* Solution
* By updating the report's sharing settings to include User B, you allow them to modify the report while maintaining appropriate security.
* Why Other Options are Incorrect
* A (Access All Reports): Grants excessive permissions and is not recommended.
* C (Edit Role Configuration): Role configuration changes apply broadly, not specifically to this report.
* D (Edit Authorship): Changing authorship is not a valid option in SuccessFactors.
References
* SAP SuccessFactors Reporting Permissions Guide

質問 # 48
In the Advanced Reporting tool, you want to create a query where the results meet the following criteria: Only show one row per employee, Only show the pay components Base Salary and Bonus, Show these pay components as individual columns. You have joined the Global Job Information table with the Compensation table.What else must you do? Note: There are 2 correct answers to this question.

• A. Change the table join to the Compensation table to an inner join.
• B. Duplicate the Compensation table.
• C. Configure a table restriction of the Compensation table.
• D. Configure a table restriction of the Global Job Information table.

正解：B、C

解説：
To meet the specified query requirements in Advanced Reporting:
* Duplicate the Compensation Table (B):
* You must duplicate the table to represent Base Salary and Bonus as separate columns. Each instance of the table focuses on one pay component.
* Configure a Table Restriction of the Compensation Table (C):
* Apply restrictions to filter the data in each duplicated table to only include the specific pay component (e.g., Base Salary in one table and Bonus in the other).

質問 # 49
A user wants to build a pivot chart based on a list report that has a run-time filter. What must the user do?

• A. Create a filter group within the run-time filter before building the report.
• B. Create the pivot chart before adding the run-time filter.
• C. Create the run-time filter before building the report.
• D. Create the pivot chart after adding the run-time filter.

正解：D

解説：
* Pivot Chart Creation Process
* To build a pivot chart based on a list report with a run-time filter, the filter must first be added to ensure the data being visualized reflects the selected filter criteria.
* Explanation of Correct Answer
* A pivot chart dynamically organizes and summarizes data. Adding the run-time filter beforehand ensures the chart is based on the filtered dataset.
* Creating the chart after applying the filter allows for a more accurate representation of the desired data.
* Why Other Options are Incorrect
* A: Filter groups are unrelated to this scenario.
* B: Creating the chart before the filter would lead to inaccurate results.
* C: While adding the filter first is correct, the chart must be created after this step.
References
* SAP SuccessFactors Pivot Chart and Story Reporting Documentation
Let me know if further clarification is required!

質問 # 50
You are using a Multi-Dataset table report without Business Intelligence Reporting Tools (BIRT). What are characteristics of the report output? Note: There are 2 correct answers to this question.

• A. Report results are shown on separate tabs in the output.
• B. Report results are shown on a single tab in the output.
• C. Data is joined in the query.
• D. Data is NOT joined in the query.

正解：A、D

解説：
When using a Multi-Dataset Table Report without Business Intelligence Reporting Tools (BIRT), the following characteristics apply:
* Report results are shown on separate tabs in the output (A):
* Each dataset's output is displayed on its respective tab. This is because the data is not integrated or merged in the query.
* Data is NOT joined in the query (D):
* Multi-dataset reports without BIRT do not perform data joins. Each dataset is treated independently.

質問 # 51
You are working with nested labels on your instance in Report Center.
How do you configure the labels as displayed in the screenshot? Note: There are 2 correct answers to this question.

• A. Edit the Recruiting label in Manage Labels.
• B. Set "Nest label in;" to Recruiting.
• C. Set "Nest label in:" to Talent Management.
• D. Edit the Talent Management label in Manage Labels.

正解：A、C

解説：
* Set "Nest Label In" to Talent Management (B):
* To organize nested labels effectively, you need to set the parent label, such as "Talent Management," for the nested hierarchy.
* Edit the Recruiting Label in Manage Labels (D):
* You can adjust the nested label under "Recruiting" to align it under the correct parent category.

質問 # 52
In a canvas report, to which of the following can you export multipage reports in a single transaction? Note:
There are 3 correct answers to this question.

• A. Microsoft PowerPoint
• B. Adobe PDF
• C. Microsoft Word
• D. Microsoft Excel
• E. XML format

正解：A、B、C

解説：
* Exporting Multipage Reports
* Canvas reports support exporting multipage reports in formats that preserve the layout and design, such as Microsoft Word, PowerPoint, and PDF.
* Why Other Options are Incorrect
* A. Microsoft Excel: Canvas reports do not support exporting multipage layouts to Excel.
* C. XML Format: XML is not supported for multipage exports.
References
* SAP SuccessFactors Canvas Reports Export Options

質問 # 53
You are constructing a Story. You want to return the quarter to date event records to count terminations.
Which options would you set in the time filter? Note: There are 3 correct answers to this question.

• A. Range Type: fixed
• B. Records Returned: Include only records that begin in your defined date range
• C. Range Type: dynamic
• D. Range Parameters: Period to Date
• E. Range period: Actual start/end date of the current quarter

正解：B、C、D

解説：
* Setting Time Filters for Quarter-to-Date Data
* To return records within a quarter-to-date timeframe, the filters must be configured dynamically to adapt to the current period.
* Explanation of Correct Answers
* A (Period to Date): Ensures the filter dynamically calculates dates for the current quarter.
* C (Dynamic Range Type): Dynamically adjusts the date range based on the current period.
* E (Records Returned): Ensures only records within the defined range are included.
* Why Other Options are Incorrect
* B (Fixed Start/End Dates): Fixed dates do not accommodate dynamic quarter-to-date filtering.
* D (Fixed Range Type): Fixed ranges do not adapt to the current quarter.
References
* SAP SuccessFactors Story Reporting Guide

質問 # 54
Which permissions should you assign to allow a user to add a new story that will include Career Development Planning data? Note: There are 2 correct answers to this question.

• A. Career Development Planning -> Data Access: Story
• B. Career Development Planning -> Career Development Plan (CDP) Access Permission
• C. Report Permission -> Create Story
• D. Report Permission -> Create Report

正解：A、B

解説：
To allow a user to add a new story that includes Career Development Planning (CDP) data:
* Career Development Planning # Data Access: Story (A):
* This permission grants access to Career Development Planning data for use in stories.
* Career Development Planning # Career Development Plan (CDP) Access Permission (D):
* This permission ensures access to the Career Development Plan data necessary for including it in a story.

質問 # 55
You want to join two tables, A and B, and you want to include all rows from Table A, and only matching rows from Table B. Which join type must you use?

• A. Inner
• B. Left
• C. Outer

正解：B

解説：
* Understanding JoinsIn reporting or database queries, a join determines how two tables are combined based on a related column.
* Types of Joins
* Outer Join: Includes all rows from both tables, filling in NULL where no match exists.
* Left Join: Includes all rows from the left table (Table A) and only matching rows from the right table (Table B).
* Inner Join: Includes only rows that have matches in both tables.
* Correct Join for the RequirementA Left Join is the appropriate choice to include all rows from Table A and only matching rows from Table B. This ensures Table A's data remains intact while incorporating relevant data from Table B.
References
* SAP SuccessFactors Reporting Joins: User Guide

質問 # 56
What features are available only when you use Business Intelligence and Reporting Tools (BIRT) with Table Reports? Note: There are 2 correct answers to this question.

• A. SFTP scheduling
• B. Printable chart with custom formatting requirements
• C. Simple data extraction
• D. Advanced cell level formulas

正解：B、D

解説：
* Printable Chart with Custom Formatting Requirements (C):
* BIRT enables creating highly customized printable charts with advanced formatting options. This is especially useful for meeting specific presentation or branding requirements in report outputs.
* Advanced Cell-Level Formulas (D):
* BIRT provides capabilities to apply complex cell-level formulas, allowing for advanced calculations, conditional formatting, and logic within table reports.

質問 # 57
Within a Story, you create a query using the Basic User Information table. After you add the Proxy Information table, you notice that some of the basic information records are NO longer displayed in the preview. How do you adjust the query to return the missing records in the preview?

• A. Remove the related table and add it using the Show Related Tables command from the Action Menu.
• B. Change the join type to Inner Join.
• C. Change the join type to Left Outer Join.
• D. Remove the related table and select and drag it from the Available Data section.

正解：C

解説：
* Join Types in Queries:
* Inner Join: Only returns rows where there is a match in both tables.
* Left Outer Join: Returns all rows from the left table and matching rows from the right table, filling in NULLs where there is no match.
* Scenario:
* Adding the Proxy Information table creates a situation where some records from the Basic User Information table no longer match with Proxy Information.
* Changing the join type to Left Outer Join ensures that all records from the Basic User Information table are included, regardless of matching Proxy Information.
* Steps to Adjust Join Type:
* Edit the query.
* Locate the join between Basic User Information and Proxy Information tables.
* Change the join type from Inner Join to Left Outer Join.

質問 # 58
What permission type applied to table reports is defined by a combination of the user's View permissions and Target Population in role-based permissions?

• A. Row level permission
• B. Field level permission
• C. Run report permission
• D. Cell level permission

正解：A

解説：
* Row Level Permissions Overview:
* In SAP SuccessFactors Table Reports, row-level permissions control which rows of data a user can access based on their role-based permissions (RBP).
* These permissions depend on the combination of the user's View permissions (fields they are allowed to see) and Target Population (the subset of employees they are authorized to access).
* How It Works:
* The system evaluates both the target population and the view permissions to determine the rows visible to the user in a table report.
* For example, if a manager has access to employees in their team but no view permissions for compensation fields, the data rows related to compensation will not be visible.

質問 # 59
What is included in the saved state of a bookmark for a Story report? Note: There are 3 correct answers to this question.

• A. Comments
• B. Input controls
• C. Prompts
• D. Data
• E. Filters

正解：B、C、E

解説：
When saving a bookmark for a Story report, the following states are saved:
* Filters (A): Any applied filters are retained in the bookmark.
* Input Controls (B): User-defined inputs (like sliders or dropdowns) are preserved.
* Prompts (D): User-specified prompts during execution are also included.

質問 # 60
......

合格させるSAP C_THR92_2505試験最速合格にはJPNTest：https://www.jpntest.com/shiken/C_THR92_2505-mondaishu

準備C_THR92_2505問題解答でC_THR92_2505試験問題集：https://drive.google.com/open?id=1EwuYqDVVYLlWE4UBRg5oT3ipHbjP1OS8