210-015無料問題集「VCE Vblock System Deployment and Implementation

質問 1

You are testing DRS as part of the Vblock System 320 deployment and have placed the ESXi server into Maintenance mode. After several minutes, the ESXi server has not completed the transition into Maintenance mode.
Which two actions should you perform? (Choose two.)

（A）Verify vMotion is properly configured because DRS requires it to transition operational VMs.

（B）Verify that DRS is in fully automatic mode.

（C）Verify VMware HA is configured because DRS requires it to transition the VMs.

（D）Manually shut down the VMs when you put an ESXi server into Maintenance mode.

正解：A、B 解答を投票する

質問 2

Overnight several virtual machines have triggered alarms for guest memory usage.
What are the proper steps to acknowledge the alarms while investigating the cause?

（A）From the Status Bar click the alarm button; select Acknowledge the Alarm.

（B）Place all affected virtual machines into suspend until the alarms clear on their own.

（C）Notify your monitoring team to disable all virtual machine monitoring; reboot all affected virtual machines and manually monitor their memory usage for the next 60 minutes.

（D）Locate the relevant alarms and reset them.

正解：A 解答を投票する

質問 3

Click the Exhibit button.

Referring to the exhibit, which two actions would allow powering on the virtual machine? (Choose two.)

（A）Increase the memory reservation on the virtual machine.

（B）Increase the amount of memory allocated to the virtual machine.

（C）Decrease the memory reservation on the virtual machine.

（D）Add more memory to the ESXi host.

正解：C、D 解答を投票する

質問 4

An ESXi host is running a licensed version of PowerPathVE. A single path to a PowerPathVE-controlled device is lost.
Which two statements are true? (Choose two.)

（A）The only way to restore a failed path is with the rpowermt restore CLI command.

（B）After the path has been repaired, PowerPathVE will automatically restore the path and resume IO down the path.

（C）The periodic testing of live and dead paths is low priority for PowerPathVE.

（D）The time required to restore a failed path on a heavily loaded system is less than the time required on a lightly loaded system.

正解：B、C 解答を投票する

質問 5

Which ESXi CLI command is used when installing VIB files on an ESXi host?

（A）esxcfg vib install

（B）esxcli software vib install

（C）vicfg-module vib install

（D）esxcli system vib install

正解：B 解答を投票する

質問 6

Your vSphere environment has two virtual machines configured to use the same VLAN and subnet. The hosts in the cluster are set up to use one DV switch. You want to ensure that the VMs communicate properly on the network and with each other regardless which host they use.
Which action will accomplish this task?

（A）Ensure the ESXi hosts load balancing policy is configured to route based on the originating virtual port ID.

（B）Consult with your network team to ensure that the ESXi hosts use common routers and switches in your data center environment.

（C）Ensure the ESXi hosts load balancing policy is configured to route based on source mac hash.

（D）The vNic DVPort group must be configured to be the correct setting on both virtual machines for the VLAN they are using.

正解：D 解答を投票する

質問 7

Which database platform is supported with VMware 5.x in a Vblock System?

（A）PostgreSQL

（B）MySQL

（C）IBM DB2

（D）Microsoft SQL Server

正解：D 解答を投票する

質問 8

Which operating system requires additional binaries to apply virtual machine customization

（A）Microsoft Windows 2003

（B）Microsoft Windows 7

（C）Microsoft Windows 2008

（D）Red Hat Linux

正解：A 解答を投票する

質問 9

You are working with a customer to enable VMware Fault Tolerance on a number of virtual machines and you encounter the error shown below on one of them.
The Fault Tolerance configuration of the entity SalesVM has an issue Fault Tolerance not supported by host hardware
What is the cause for this error?

（A）Fault Tolerance requires that the hosts for the primary and secondary virtual machines use the same type of CPU.

（B）This virtual machine is on a host that is not in a vSphere HA cluster or it has had vSphere HA disabled.

（C）The virtual machine is running VMI kernel and is paravirtualized.

（D）Fault Tolerance is only supported on specific processors and BIOS settings with Hardware Virtualization enabled.

正解：D 解答を投票する

質問 10

Which CDDVD connection mode would be used only for remote client device access?

（A）Host Device

（B）Data store ISO File

（C）Passthrough IDE (raw)

（D）Emulate IDE

正解：C 解答を投票する

210-015 無料問題集「VCE Vblock System Deployment and Implementation - Virtualization」

弊社を連絡する

関連リンク

トップ試験