5V0-42.21無料問題集「VMware SD-WAN Design and Deploy Skills」

質問 1

A network architect is designing a VMware SD-WAN architect for customer using VMware hosted VCO and VCGs, white VCEs will be deployed at the customer's branches and data centers. The network architect would like to achieve control plane redundancy.
Which action, if any, should be taken to meet this goal?

（A）VCGs automatically assigned to a VCF. do not participate in control plane At least two dedicated Controllers should be manually assigned for each VCGs to achieve control plane redundancy.

（B）Multiple VCGs are automatically assigned to every VCE and control plane on VCUs is always enabled, so control plane redundancy has been taken care of already

（C）VCGs automatically assigned to a VCE do not participate in control plane At least two dedicated Controllers should be manually assigned for the customer to achieve control plane redundancy

（D）Multiple VCFs at data centers can be contoured to function as route reflectors to achieve control plane redundancy.

正解：D 解答を投票する

質問 2

A customer would like to ensure that the traffic towards the Partner Gateway does not exceed a certain bandwidth.
Which feature should be used?

（A）Enable the SD-WAN Overlay Rate-Limit.

（B）Change the application priority to low.

（C）Enable the rate limit under a new custom Business Policy Rule.

（D）Modify the SD WAN Traffic Class and Weight Mapping

正解：B 解答を投票する

質問 3

A service provider wants to offer a common service from its data center via VMware SD-WAN Partner Gateway to many customers with overlapping IP addresses.
Which configuration must be implemented?

（A）Enable tag type QinQ under hand off interface configuration

（B）Enable NAT hand off under hand off static routes configuration

（C）Configure source policy-based NAT under business- policies configuration

（D）Define multiple segments tor each customer

正解：D 解答を投票する

質問 4

Which deployment model ensures that management and control plane is cloud-delivered while data continues to flow on-premises between VMware SD-WAN nodes that remain on-premises?

（A）Hosted SD-WAN Orchestrator/Controller

（B）Partially on-premises

（C）All on-premises

（D）On-premises SD-WAN Orchestrator/Controller

正解：C 解答を投票する

質問 5

The VMware SD-WAN solution is comprised of Orchestrator, Gateway, and Edge. The architecture ensures separation and secure communication between the management, control, and data plane of the solution.
The management plane consists of the VMware SD-WAN Orchestrator, and the control plane is comprised of the VMware SO-WAN Gateway/ Controller. Which statement correctly describes this situation?

（A）VMware SD-WAN Edges/Gateways establishes a Transport Layer Security (TLS) 1 2 encrypted session to the VMware SU-WAN Orchestrator

（B）Traffic between VMware SD-WAN Edges and from VMware SD-WAN Edges to VMware SD-WAN Gateways uses VMware SD-WAN Management Protocol (VCMP) tunneling over User Datagram Protocol (UDP) port 2427. secured with Internet Protocol Security (IPSec)

（C）To make the entire solution to work property, TCP port 443 and HOP port 500 and UDP port 4500 are required to open in the firewall rule, if Edge is deployed behind a Firewall.

（D）There is impact on data plane when the Edge loses connectivity to the management plane. The operator only loses the visibility of the Edge from Orchestrator and cannot make configuration changes on the Edge until the management plane connectivity is resumed.

正解：B 解答を投票する

質問 6

A network architect from a service provider is designing an architecture using a VMware SD-WAN Partner Gateway handoff.
Which dynamic routing protocol should the engineering choose?

（A）Static

（B）OSPF

（C）RIP Version 2

（D）BGP

正解：C 解答を投票する

5V0-42.21 無料問題集「VMware SD-WAN Design and Deploy Skills」

弊社を連絡する

関連リンク

トップ試験