あなたを必ず合格させるMO-100問題集PDF2022年最新のに更新されたのは35問あります
Microsoft MO-100リアル試験問題と解答を無料で提供いたします
質問 10
SIMULATION
Project 1 of 7: Observation
Overview
You are a member of the Barstow College Observation Project committee. You are preparing the initial summary report for this year's count, but have not received all of the data you need to complete the report.
Introduction
The multi-departmental Wildlife Observation Project has completed its wildlife population counts for this year.
The counts were made between May 5 and May 7 for both the wilderness and cultivated land areas. This is in line with the count periods for all previous years. The species used for the counts have been identified as common for the region (central Missouri) in which the counts were taken. (Author, 2009) As in previous years, five observation blinds were set up two weeks before the counts were to take place.
Counters worked eight-hour shifts providing 24-hour coverage of the count areas for two days. Weather for both observation days was clear and mild (varying between 50-70 degrees F).
The results presented here are summary total results only, which counts from five and ten years ago provided for comparison. Detailed observation results will be available as soon as they are completed. We estimate that they will be available some time in the next two weeks.
Wilderness Summary
The wilderness observation area is a five-acre section of unimproved forest land. The most common trees in the area are maple, red oak, cedar, sweet gum, and hickory. The area also includes a small spring. The area is not enclosed by a fence or other man-made barrier.
The area is located eight miles from the nearest paved road and twelve miles from the nearest residence. Offroad vehicles were used to bring counters close to, but not entering, the count area. The nearest approach by off-road vehicles was one mile.
The table below lists the summary counts.
Though further research any analysis is needed, the drop in mourning dove and bobwhite quail counts could be significant. The detailed count data shows these numbers failing off each year.
Cultivated Land Summary
The cultivated land observation area is a five-acre section of cultivated land near the center of a 50-acre field.
The field is used to grow corn, wheat, soybeans, and clover, with the crop rotated annually. In the fifth year of the cycle, the field is left fallow.
The area is located two miles from the nearest paved road and one mile from the nearest residence. A storage barn is located at the southern border of the field.
The table below lists the summary counts.
Additional Notes
This project was initially scheduled to run for ten years, so we are currently in our last year. The committee needs to decide if it is worth the time and expense to continue the project. The landowners have experience that they would be happy to let us continue. Costs relating to the project is minimal and it does provide an opportunity to offer extra credit to students volunteering as counters.
A suggestion has been made by some committee members that we should increase the count frequency, counting on a quarterly schedule instead of an annual schedule. This would need to be coordinated with the owner of the cultivated field so that we do not interfere with planting or harvesting schedules.
Special Thanks
Once again, we would like to offer special thanks to:
We couldn't do this without you.
Add a table with eight rows and four columns in the "Cultivated Land Summary" section, below the text "The table below lists the summary counts."
正解:
解説:
See the explanation below.
Explanation:
1. Click below the text "The table below lists the summary counts." where the table should be inserted.
2. Select Table from the Insert tab.
3. Drag through the grid to set eight rows and four columns (4x8 Table) as desired OR
1. Click below the text "The table below lists the summary counts." where the table should be inserted.
2. Select Table from the Insert tab.
3. Select Insert Table from the options provided below and type four columns and eight rows in the appropriate boxes, then select OK.
References:
https://support.office.com/en-us/article/Insert-a-table-A138F745-73EF-4879-B99A-2F3D38BE612A
質問 11
SIMULATION
Project 6 of 7: Recall
Overview
You work in Customer Communications at Northwind Traders. You are preparing a product recall announcement.
We regret any inconvenience that this might cause you. Northwind Traders is dedicated to providing you with reliable, high-quality, and safe products.
The product sticker on the bottom of the dehydrator can determine whether or not your dehydrator is included in the recall. For affected models, there is a slight risk that the product might overheat when used, resulting in a potential burn hazard.
DO NOT RETURN TO YOUR RETAILER. Go to the Northwind traders web site at http:// www.northwindtraders.com/ and click on the "Product Recall" banner at the top of the page for return instructions. You will receive a full refund for the dehydrator and we will also ship you a replacement dehydrator.
REMINDER:
Copy the text "UNPLUG AND DO NOT USE THIS DEHYDRATOR" and paste it after the text "REMINDER:".
The pasted text should be left-justified and bold.
正解:
解説:
See the explanation below.
Explanation:
1. Select the text "UNPLUG AND DO NOT USE THIS DEHYDRATOR" then right-click and select Copy.
2. Click after the text "REMINDER" then right-click and select Paste.
OR
1. Select the text "UNPLUG AND DO NOT USE THIS DEHYDRATOR" then press Ctrl+C.
2. Click after the text "REMINDER" then press Ctrl+V.
3. Select the pasted text and format the alignment to left-justified and the text to bold.
質問 12
In the "Banking Fees" section, convert the tab-delimited text to a two-column table. Accept the default AutoFit behavior.
正解:
解説:
Click the Insert tab and click Table in the Table section. Select Convert Text to Table from the drop-down menu.
On the Convert Text to Table dialog box, the Number of columns should already be set to 2 if you have only one tab between each item on each line. The Number of rows is automatically calculated.
Topic 5, City Power & Light
質問 13
SIMULATION
Project 1 of 7: Observation
Overview
You are a member of the Barstow College Observation Project committee. You are preparing the initial summary report for this year's count, but have not received all of the data you need to complete the report.
Introduction
The multi-departmental Wildlife Observation Project has completed its wildlife population counts for this year.
The counts were made between May 5 and May 7 for both the wilderness and cultivated land areas. This is in line with the count periods for all previous years. The species used for the counts have been identified as common for the region (central Missouri) in which the counts were taken. (Author, 2009) As in previous years, five observation blinds were set up two weeks before the counts were to take place.
Counters worked eight-hour shifts providing 24-hour coverage of the count areas for two days. Weather for both observation days was clear and mild (varying between 50-70 degrees F).
The results presented here are summary total results only, which counts from five and ten years ago provided for comparison. Detailed observation results will be available as soon as they are completed. We estimate that they will be available some time in the next two weeks.
Wilderness Summary
The wilderness observation area is a five-acre section of unimproved forest land. The most common trees in the area are maple, red oak, cedar, sweet gum, and hickory. The area also includes a small spring. The area is not enclosed by a fence or other man-made barrier.
The area is located eight miles from the nearest paved road and twelve miles from the nearest residence. Off- road vehicles were used to bring counters close to, but not entering, the count area. The nearest approach by off-road vehicles was one mile.
The table below lists the summary counts.
Though further research any analysis is needed, the drop in mourning dove and bobwhite quail counts could be significant. The detailed count data shows these numbers failing off each year.
Cultivated Land Summary
The cultivated land observation area is a five-acre section of cultivated land near the center of a 50-acre field.
The field is used to grow corn, wheat, soybeans, and clover, with the crop rotated annually. In the fifth year of the cycle, the field is left fallow.
The area is located two miles from the nearest paved road and one mile from the nearest residence. A storage barn is located at the southern border of the field.
The table below lists the summary counts.
Additional Notes
This project was initially scheduled to run for ten years, so we are currently in our last year. The committee needs to decide if it is worth the time and expense to continue the project. The landowners have experience that they would be happy to let us continue. Costs relating to the project is minimal and it does provide an opportunity to offer extra credit to students volunteering as counters.
A suggestion has been made by some committee members that we should increase the count frequency, counting on a quarterly schedule instead of an annual schedule. This would need to be coordinated with the owner of the cultivated field so that we do not interfere with planting or harvesting schedules.
Special Thanks
Once again, we would like to offer special thanks to:
We couldn't do this without you.
Add a Status of "Requires committee review" to the document properties.
正解:
解説:
See the explanation below.
Explanation:
1. Select the File tab and select Info.
2. Click on Properties at the top of the page and then select Advanced Properties.
3. Select the Custom tab.
4. In the Name box, select or type a name for the custom property, in this case it would be "Status".
5. In the Type list, select "Text".
6. In the Value box, type "Requires committee review", then click OK.
References:
https://support.office.com/en-us/article/View-or-change-the-properties-for-an-Office-file-21D604C2-481E-4379-
8E54-1DD4622C6B75
質問 14
Change the orientation of only page 3 to Landscape.
正解:
解説:
Place your cursor at the very beginning of the page that you would like to flip to landscape. ( ...
Select "Layout" or "Page Layout" > "Breaks" > "Next Page" to create a section.
Select the "Page Layout" tab and select "Orientation" > "Landscape".
質問 15
SIMULATION
Project 1 of 7: Observation
Overview
You are a member of the Barstow College Observation Project committee. You are preparing the initial summary report for this year's count, but have not received all of the data you need to complete the report.
Introduction
The multi-departmental Wildlife Observation Project has completed its wildlife population counts for this year.
The counts were made between May 5 and May 7 for both the wilderness and cultivated land areas. This is in line with the count periods for all previous years. The species used for the counts have been identified as common for the region (central Missouri) in which the counts were taken. (Author, 2009) As in previous years, five observation blinds were set up two weeks before the counts were to take place.
Counters worked eight-hour shifts providing 24-hour coverage of the count areas for two days. Weather for both observation days was clear and mild (varying between 50-70 degrees F).
The results presented here are summary total results only, which counts from five and ten years ago provided for comparison. Detailed observation results will be available as soon as they are completed. We estimate that they will be available some time in the next two weeks.
Wilderness Summary
The wilderness observation area is a five-acre section of unimproved forest land. The most common trees in the area are maple, red oak, cedar, sweet gum, and hickory. The area also includes a small spring. The area is not enclosed by a fence or other man-made barrier.
The area is located eight miles from the nearest paved road and twelve miles from the nearest residence. Off- road vehicles were used to bring counters close to, but not entering, the count area. The nearest approach by off-road vehicles was one mile.
The table below lists the summary counts.
Though further research any analysis is needed, the drop in mourning dove and bobwhite quail counts could be significant. The detailed count data shows these numbers failing off each year.
Cultivated Land Summary
The cultivated land observation area is a five-acre section of cultivated land near the center of a 50-acre field.
The field is used to grow corn, wheat, soybeans, and clover, with the crop rotated annually. In the fifth year of the cycle, the field is left fallow.
The area is located two miles from the nearest paved road and one mile from the nearest residence. A storage barn is located at the southern border of the field.
The table below lists the summary counts.
Additional Notes
This project was initially scheduled to run for ten years, so we are currently in our last year. The committee needs to decide if it is worth the time and expense to continue the project. The landowners have experience that they would be happy to let us continue. Costs relating to the project is minimal and it does provide an opportunity to offer extra credit to students volunteering as counters.
A suggestion has been made by some committee members that we should increase the count frequency, counting on a quarterly schedule instead of an annual schedule. This would need to be coordinated with the owner of the cultivated field so that we do not interfere with planting or harvesting schedules.
Special Thanks
Once again, we would like to offer special thanks to:
We couldn't do this without you.
Merge all cells in the bottom row of the table below the "Wilderness Summary" heading into one cell.
正解:
解説:
See the explanation below.
Explanation:
1. Select the cells in the bottom row of the table below the "Wilderness Summary" which you want to merge.
2. Under Table Tools, on the Layout tab, in the Merge group, select Merge Cells.
OR
1. Select the cells in the bottom row of the table below the "Wilderness Summary" which you want to merge.
2. Right click and select Merge Cells.
References:
https://support.office.com/en-us/article/Merge-or-split-cells-in-a-table-8B458DEB-0FC5-4C8D-8D94-
2D4DA98193F8
質問 16
SIMULATION
Project 7 of 7: Coffee
Overview
You are preparing a flyer for use at a commercial foods trade show. You are editing the document in response to client requests.
Apply the Soft Round Bevel picture effect to the image of a coffee cup on a saucer.
正解:
解説:
See the explanation below.
Explanation:
1. Select the image of the coffee cup on a saucer which you want to add the effect to.
2. Click Picture Effects from the Picture Styles group in the Format tab under the Picture Tools.
3. Render the cursor over the Bevel option from the Picture Effects options, then select the Soft Round option.
References:
https://support.office.com/en-us/article/Add-or-change-an-effect-for-a-picture-D9F0F1F2-5227-450F-95B4-
25FFDDDBD965
25FFDDDBD965
質問 17
SIMULATION
Project 6 of 7: Recall
Overview
You work in Customer Communications at Northwind Traders. You are preparing a product recall announcement.
We regret any inconvenience that this might cause you. Northwind Traders is dedicated to providing you with reliable, high-quality, and safe products.
The product sticker on the bottom of the dehydrator can determine whether or not your dehydrator is included in the recall. For affected models, there is a slight risk that the product might overheat when used, resulting in a potential burn hazard.
DO NOT RETURN TO YOUR RETAILER. Go to the Northwind traders web site at http:// www.northwindtraders.com/ and click on the "Product Recall" banner at the top of the page for return instructions. You will receive a full refund for the dehydrator and we will also ship you a replacement dehydrator.
REMINDER:
Add the Integral header with the title "PRODUCT ANNOUNCEMENT".
正解:
解説:
See the explanation below.
Explanation:
1. Click Header from the Insert tab.
2. Select Edit Header to create a header.
3. Type the title "PRODUCT ANNOUNCEMENT" in the [Text] box.
4. Click Close Header and Footer to complete task.
質問 18
You work for Contoso Pharmaceuticals. You are creating a report that describes a new medicine.
Check the document for accessibility issues. Correct the table-related issue reporting in the inspection results by using the first recommended action.
Do not fix other reporting issues.
正解:
解説:
Select File > Info.
Select the Check for Issues button.
質問 19
In the ''Overview'' section, apply the Soft Round bevel shape effect to the SmartArt graphic. (Be sure to select the entire SmartArt graphic.)
正解:
解説:
To create a new line of bulleted text in the Text pane, press Enter. To indent a line in the Text pane, select the line that you want to indent, and then under SmartArt Tools, on the Design tab, click Demote. To negatively indent a line, click Promote. You can also press Tab to indent or Shift+Tab to negatively indent from within the Text pane.
If you don't see the SmartArt Tools or Design tabs, double-click the SmartArt graphic.
質問 20
SIMULATION
Project 2 of 7: Bakery Letter
Overview
As the marketing manager for Liberty's Delightful Sinful Bakery and Cafe, you want to inform local businesses that you will now be providing catering services.
December 31, 2018
CATERING SERVICES ARE NOW AVAILABLE
Dear Business Owner:
Liberty's Delightful Sinful Bakery and Cafe would like to inform you that beginning next month, we will be providing catering and delivery services in your area. We invite you to look over our lunch catering menu below, and contact us to schedule your next business meeting lunch.
The menu above is a small sample of the options we have available. Liberty's Delightful Sinful Bakery will impress you with excellent service and great food at an affordable price.
We look forward to hearing from you to cater your next meeting.
Sincerely,
Steve Lasker
Owner
Apply table style Grid Table 4 - Accent 1 to the table in the document.
正解:
解説:
See the explanation below.
Explanation:
1. Select the table, then the Table Tools will appear above.
2. Select the Grid Table 4 - Accent 1 style as desired under the Design tab in the Table Tools menu.
References:
https://support.office.com/en-us/article/Apply-table-styles-0F19E350-F9A1-4A9F-AFDB-46EE2BB8460C
質問 21
In the " Description" section, use the 3D Models feature to insert the PillPack model from the 3D objects folder into the blank paragraph.
Position the model in Line with Text.
正解:
解説:
On the Insert tab, in the Illustrations group, click 3D Models > From a File.
Navigate to where your 3D object is, select it and click Insert.
質問 22
In the ''Kids love dinosaurs'' section, copy the formatting of the first paragraph and apply it to the second paragraph.
正解:
解説:
On the Home tab, in the Clipboard group, click Copy Formatting. Select the paragraph(s) where you want to replace the formatting. On the Home tab, in the Clipboard group, click Paste, or use the keyboard shortcut Ctrl+V.
質問 23
SIMULATION
Project 5 of 7: Housekeeping
Overview
You are helping to write training program modules for Contoso Suites. You are editing the second module for housekeeping associates.
Start of Shift
The first thing you should do when you start your shift is check your schedule. The shift supervisor will provide you with a printed schedule listing the rooms for which you are responsible, and a recommended order for cleaning the rooms. Unless an early cleaning is requested by the guest, check-out rooms are given priority so that we can prepare them for the next guests.
Use the inventory checklist attached to your cleaning cart to make sure that your cart is fully stocked before you begin your rounds.
Room Cleaning
When you are ready to clean a room, knock and announce yourself as "Housekeeping." Give the guest sufficient time to respond (10 to 15 seconds). If the guest does not respond, let yourself into the room and begin cleaning.
Start by cleaning the common room and sleeping areas. It is best to follow consistent steps when cleaning rooms. This will help to prevent you from missing anything. In the common room and sleeping area:
Pick up and dispose of any trash.
Empty trash cans.
If the guest has checked out, replace the sheets on each bed with fresh sheets.
Make the bed.
Leave a "Contoso Special Treat" on each pillow.
Dust all wooden furniture.
Clean the coffee station (if necessary) and restock coffee, cups, and condiment packs.
Vacuum the common room and sleeping areas.
Do not open the courtesy bar. Checking and restocking the courtesy bar is the shift supervisor's responsibility.
It is important that you give special attention to the restrooms. The most common guest complaint is about restroom cleanliness. We recommend a "top-down" cleaning method for restrooms:
Clean all mirrors.
Clean countertops and sinks.
If damp, wipe down the shower and shower curtain.
If necessary, replace toilet paper.
Replace used towels and wash cloths.
Pick up any trash and empty trash cans.
Sweep the restroom floor and mop if necessary.
Final Check
Make a final check of the room before leaving.
Are the lights turned off?
Are the TV and coffee station turned off?
Is all trash picked up and disposed of?
Is the restroom door closed?
Close the door firmly and make sure that it locks behind you. Text your supervisor with the room number.
End-of-Shift
When you are finished, dispose of all trash in the large receptacles. Drop all sheets, towels, and other lines into the laundry carts. Restock your cart so that it is ready for the next shift.
If you have more than 30 minutes left after you have completed your assigned rooms, contact your supervisor for additional assignments.
Add the watermark DO NOT COPY 1 to all pages.
正解:
解説:
See the explanation below.
Explanation:
1. Select Watermark from the Design tab.
2. Choose DO NOT COPY 1 watermark from the pre-configured watermarks.
References:
https://support.office.com/en-us/article/Insert-a-watermark-f90f26a5-2101-4a75-bbfe- f27ef05002de#ID0EABBAAA=Windows_-_newer
質問 24
You work for Fourth Coffee. You are finalizing a training manual for employees who will bake muffins for the coffee shop.
Display the Integral header on all pages of the documents except page 1.
正解:
解説:
Step 1: Click the "Insert" tab from the Ribbon;
Step 2: Click the "Header" (or "Footer") command from the "Header&Footer" section;
Step 3: Select one style from the drop-down list (e.g., the Austin style);
Step 4: In the "Design" tab (or Header & Footer tab if Microsoft 365) from the ribbon, check the "Different First Page" command;
Now the header or footer on the first page is different from all other pages. You can delete the contents and formatting in the header or footer on the first page if you want to leave it empty.
質問 25
SIMULATION
Project 3 of 7: Service
Overview
You are an administrative assistant for Fabrikam, Inc.'s Field Service division. You are preparing the monthly newsletter to be sent out to field service engineers.
Remember that mileage reimbursement claims must be submitted by the 15th of each month. Save the mileage form as a PDF file and email it to your regional supervisor.
Bonuses are Changing
New Depot Return Process
All offices have received the new tracking form for repair depot returns. Complete the following tasks when returning parts for repair:
Complete all fields in the Field Service section of the form.
Remove the top copy and file it in your office.
Securely attach the form to the part.
Package the part for shipment.
Ship to the home office and clearly label the box "For depot return".
All returns must be shipped to the home office to receive credit. The regional depots will close in two months and will not be accepting return shipments.
Vice President's Corner
NOTE TO SELF: If the VP doesn't provide content by Wednesday, delete this section and put in something generic about customer satisfaction.
Quarterly Results
NOTE TO SELF: This is a placeholder charter. Update the chart after the actual results are available on Monday.
Use the Go To feature to navigate to the Bookmark "OldNews" and delete the paragraph at that location.
正解:
解説:
See the explanation below.
Explanation:
1. Click Bookmark from the Insert tab.
2. Click Name, to sort the list of bookmarks in the document.
3. Select "OldNews" from the list of bookmarks in the document then click Delete.
4. If a hyperlink has been inserted to the bookmark, right-click on the linked text, then select Remove Hyperlink.
References:
https://support.office.com/en-us/article/Add-or-delete-bookmarks-in-a-Word-document-or-Outlook-messagef68d781f-
0150-4583-a90e-a4009d99c2a0
質問 26
SIMULATION
Project 4 of 7: Member
Overview
You are preparing a letter to museum members announcing a new exhibit and urging them to renew their membership.
Use a Word feature to replace each occurrence of the text "patrons" with "members".
正解:
解説:
See the explanation below.
Explanation:
1. Choose Replace from the Home tab.
OR
1. Press Ctrl+H
2. Type "patrons" in the Find what box.
3. Type "members" in the Replace with box.
4. Choose Replace All since each occurrence is required to be changed.
References:
https://support.office.com/en-us/article/Find-and-replace-text-c6728c16-469e-43cd-afe4-7708c6c779b7
質問 27
In the " Fill Material" section, resize the table so that each column is "2.2" ('5.59 cm") wide.
正解:
解説:
Select your table.
On the Layout tab, in the Cell Size group, Resize column "2.2" wide.
質問 28
......
合格できるMicrosoft MO-100試験情報と無料練習テスト：https://www.jpntest.com/shiken/MO-100-mondaishu