今すぐMO-100問題を使おうMO-100問題集PDF
問題集練習試験問題学習ガイドはMO-100試験合格させます
Microsoft MO-100 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
| トピック 6 |
|
| トピック 7 |
|
| トピック 8 |
|
| トピック 9 |
|
| トピック 10 |
|
| トピック 11 |
|
| トピック 12 |
|
| トピック 13 |
|
質問 16
In the " Description" section, Insert a new placeholder citation with the name "Manufacturing1" at the end of the second paragraph after the heading.
正解:
解説:
To add a citation placeholder in Word, place your cursor at the point in your document where you want to insert the citation placeholder. Then click the "References" tab in the Ribbon. Then click the "Insert Citation" drop-down button in the "Citations & Bibliography"
Topic 1, River Cruises
Margie's Travel
You' re invited to a preview of the best in river cruising.
The preview event will feature experienced traveler and guide Pascoline Overeem, who will share highlights of last year's successful tour and provide enficing previews of the trips she is planning for this year.
Ms, Overeem will discuss tips to helps you get the most out of your travel experience, including how to take memorable photos and create a blog to share your experiences, what to bring and how to pack, and the best ways to experience a new culture.
The event is open to everyone who has been a deposit to hold a reservation for the spring salling. There are still a few spaces remaining so additional guests also be included if space permits. Enjoy specially prepared sample foods to whet your oppefite for the delicious cuisine that you can expect to savor on your trip.
We hope you will join use for this fun and information event to learn about that exciting trip and get to know some of your travel componions before the trip even begins.
質問 17
SIMULATION
Project 5 of 7: Housekeeping
Overview
You are helping to write training program modules for Contoso Suites. You are editing the second module for housekeeping associates.
Start of Shift
The first thing you should do when you start your shift is check your schedule. The shift supervisor will provide you with a printed schedule listing the rooms for which you are responsible, and a recommended order for cleaning the rooms. Unless an early cleaning is requested by the guest, check-out rooms are given priority so that we can prepare them for the next guests.
Use the inventory checklist attached to your cleaning cart to make sure that your cart is fully stocked before you begin your rounds.
Room Cleaning
When you are ready to clean a room, knock and announce yourself as "Housekeeping." Give the guest sufficient time to respond (10 to 15 seconds). If the guest does not respond, let yourself into the room and begin cleaning.
Start by cleaning the common room and sleeping areas. It is best to follow consistent steps when cleaning rooms. This will help to prevent you from missing anything. In the common room and sleeping area:
Pick up and dispose of any trash.
Empty trash cans.
If the guest has checked out, replace the sheets on each bed with fresh sheets.
Make the bed.
Leave a "Contoso Special Treat" on each pillow.
Dust all wooden furniture.
Clean the coffee station (if necessary) and restock coffee, cups, and condiment packs.
Vacuum the common room and sleeping areas.
Do not open the courtesy bar. Checking and restocking the courtesy bar is the shift supervisor's responsibility.
It is important that you give special attention to the restrooms. The most common guest complaint is about restroom cleanliness. We recommend a "top-down" cleaning method for restrooms:
Clean all mirrors.
Clean countertops and sinks.
If damp, wipe down the shower and shower curtain.
If necessary, replace toilet paper.
Replace used towels and wash cloths.
Pick up any trash and empty trash cans.
Sweep the restroom floor and mop if necessary.
Final Check
Make a final check of the room before leaving.
Are the lights turned off?
Are the TV and coffee station turned off?
Is all trash picked up and disposed of?
Is the restroom door closed?
Close the door firmly and make sure that it locks behind you. Text your supervisor with the room number.
End-of-Shift
When you are finished, dispose of all trash in the large receptacles. Drop all sheets, towels, and other lines into the laundry carts. Restock your cart so that it is ready for the next shift.
If you have more than 30 minutes left after you have completed your assigned rooms, contact your supervisor for additional assignments.
One the second numbered list that begins with "1. Clean all mirrors", modify the list to start numbering at "9".
正解:
解説:
See the explanation below.
Explanation:
1. Double-click the numbers in the list which begins with "1. Clean all mirrors".
2. Right-click on the number 1.
3. Select Set Numbering Value.
4. Then choose the number 9 in the Set value to box.
References:
https://support.office.com/en-us/article/Change-the-numbering-in-a-numbered-list-A9731137-8A85-47CE- A7E4-8B1C6C8C77A3
質問 18
SIMULATION
Project 2 of 7: Bakery Letter
Overview
As the marketing manager for Liberty's Delightful Sinful Bakery and Café, you want to inform local businesses that you will now be providing catering services.
December 31, 2018
CATERING SERVICES ARE NOW AVAILABLE
Dear Business Owner:
Liberty's Delightful Sinful Bakery and Café would like to inform you that beginning next month, we will be providing catering and delivery services in your area. We invite you to look over our lunch catering menu below, and contact us to schedule your next business meeting lunch.
The menu above is a small sample of the options we have available. Liberty's Delightful Sinful Bakery will impress you with excellent service and great food at an affordable price.
We look forward to hearing from you to cater your next meeting.
Sincerely,
Steve Lasker
Owner
Apply table style Grid Table 4 - Accent 1 to the table in the document.
正解:
解説:
See the explanation below.
Explanation:
1. Select the table, then the Table Tools will appear above.
2. Select the Grid Table 4 - Accent 1 style as desired under the Design tab in the Table Tools menu.
References:
https://support.office.com/en-us/article/Apply-table-styles-0F19E350-F9A1-4A9F-AFDB-46EE2BB8460C
質問 19
You work for Woodgrove Bank. You are preparing a brochure that explains U.S bank account options for international student.
Find the word ''automatic'' and delete it from the document.
正解:
解説:
Use Ctrl+F key to and find word "automatic" Once find and highlighted, delete it by using delete key.
質問 20
SIMULATION
Project 3 of 7: Service
Overview
You are an administrative assistant for Fabrikam, Inc.'s Field Service division. You are preparing the monthly newsletter to be sent out to field service engineers.
Remember that mileage reimbursement claims must be submitted by the 15th of each month. Save the mileage form as a PDF file and email it to your regional supervisor.
Bonuses are Changing
New Depot Return Process
All offices have received the new tracking form for repair depot returns. Complete the following tasks when returning parts for repair:
Complete all fields in the Field Service section of the form.
Remove the top copy and file it in your office.
Securely attach the form to the part.
Package the part for shipment.
Ship to the home office and clearly label the box "For depot return".
All returns must be shipped to the home office to receive credit. The regional depots will close in two months and will not be accepting return shipments.
Vice President's Corner
NOTE TO SELF: If the VP doesn't provide content by Wednesday, delete this section and put in something generic about customer satisfaction.
Quarterly Results
NOTE TO SELF: This is a placeholder charter. Update the chart after the actual results are available on Monday.
Under the "New Depot Return Process" heading, format the five lines of text starting with "Complete all fields..." as a numbered list that has a parenthesis after the number.
正解:
解説:
See the explanation below.
Explanation:
1. Select the text you want to change into a list, in this case the five lines of text starting with "Complete all fields...".
2. Go to Home, then select Numbering, then select Define New Number Format.
3. Select the desired font size, style and color.
4. Append the numbering with a parenthesis in the Number format field.
5. Ensure that the formatting and alignment is as desired, then click OK.
References:
https://support.office.com/en-us/article/Define-New-Bullets-Numbers-and-Multilevel-Lists-6c06ef65-27ad-4893-
80c9-0b944cb81f5f#number
質問 21
In the ''Geologic eras'' section, sort the table data by ''Geologic period'' (Ascending) and then by ''Dinosaur'' (Asending).
正解:
解説:
Select a cell within the data.
Select Home > Sort & Filter. Or, select Data > Sort.
Select an option: Sort A to Z - sorts the selected column in an ascending order. Sort Z to A - sorts the selected column in a descending order.
質問 22
SIMULATION
Project 2 of 7: Bakery Letter
Overview
As the marketing manager for Liberty's Delightful Sinful Bakery and Cafe, you want to inform local businesses that you will now be providing catering services.
December 31, 2018
CATERING SERVICES ARE NOW AVAILABLE
Dear Business Owner:
Liberty's Delightful Sinful Bakery and Cafe would like to inform you that beginning next month, we will be providing catering and delivery services in your area. We invite you to look over our lunch catering menu below, and contact us to schedule your next business meeting lunch.
The menu above is a small sample of the options we have available. Liberty's Delightful Sinful Bakery will impress you with excellent service and great food at an affordable price.
We look forward to hearing from you to cater your next meeting.
Sincerely,
Steve Lasker
Owner
Apply table style Grid Table 4 - Accent 1 to the table in the document.
正解:
解説:
See the explanation below.
Explanation:
1. Select the table, then the Table Tools will appear above.
2. Select the Grid Table 4 - Accent 1 style as desired under the Design tab in the Table Tools menu.
References:
https://support.office.com/en-us/article/Apply-table-styles-0F19E350-F9A1-4A9F-AFDB-46EE2BB8460C
質問 23
In the " Description" section, use the 3D Models feature to insert the PillPack model from the 3D objects folder into the blank paragraph.
Position the model in Line with Text.
正解:
解説:
On the Insert tab, in the Illustrations group, click 3D Models > From a File.
Navigate to where your 3D object is, select it and click Insert.
質問 24
SIMULATION
Project 2 of 7: Bakery Letter
Overview
As the marketing manager for Liberty's Delightful Sinful Bakery and Café, you want to inform local businesses that you will now be providing catering services.
December 31, 2018
CATERING SERVICES ARE NOW AVAILABLE
Dear Business Owner:
Liberty's Delightful Sinful Bakery and Café would like to inform you that beginning next month, we will be providing catering and delivery services in your area. We invite you to look over our lunch catering menu below, and contact us to schedule your next business meeting lunch.
The menu above is a small sample of the options we have available. Liberty's Delightful Sinful Bakery will impress you with excellent service and great food at an affordable price.
We look forward to hearing from you to cater your next meeting.
Sincerely,
Steve Lasker
Owner
Add the alternative text title, "Lunch Menu" to the table in the document.
正解:
解説:
See the explanation below.
Explanation:
1. Select the table by right-clicking on it and then select Table Properties.
2. Select the Alt Text tab and type "Lunch Menu" in the Title box.
3. Press OK.
References:
https://support.office.com/en-us/article/Set-or-change-table-properties-3237de89-b287-4379-8e0c-
86d94873b2e0#__toc5
質問 25
SIMULATION
Project 2 of 7: Bakery Letter
Overview
As the marketing manager for Liberty's Delightful Sinful Bakery and Cafe, you want to inform local businesses that you will now be providing catering services.
December 31, 2018
CATERING SERVICES ARE NOW AVAILABLE
Dear Business Owner:
Liberty's Delightful Sinful Bakery and Cafe would like to inform you that beginning next month, we will be providing catering and delivery services in your area. We invite you to look over our lunch catering menu below, and contact us to schedule your next business meeting lunch.
The menu above is a small sample of the options we have available. Liberty's Delightful Sinful Bakery will impress you with excellent service and great food at an affordable price.
We look forward to hearing from you to cater your next meeting.
Sincerely,
Steve Lasker
Owner
Remove all personal information from the document.
正解:
解説:
See the explanation below.
Explanation:
1. Create a copy of your original document by clicking on the File tab, and then Save As.
2. In the copy of the original document, select the File tab, then click on Info.
3. Click on Check for Issues, and then select Inspect Document.
4. In the Document Inspector dialog box, check the boxes to select the types of hidden content you want to be inspected, in this case it would be personal information and then click Inspect.
5. Review the results, then click Remove All next to the inspection results.
References:
https://support.office.com/en-us/article/Remove-hidden-data-and-personal-information-by-inspectingdocuments- presentations-or-workbooks-356b7b5d-77af-44fe-a07f-9aa4d085966f
質問 26
This project has only one task.
You have been assigned the task of keeping meeting, notes for your company's Board of Directors.
Save a copy of the document as a Word 2019 template named "Notes" that is compatible with the latest Word features and does not support macros. Save the template file in the default location.
正解:
解説:
Open the Word document that you want to inspect for hidden data and personal information.
Click the File tab, click Save As, and then type a name in the File name box to save a copy of your original document.
In the copy of your original document, click the File tab, and then click Info.
Click Check for Issues, and then click Inspect Document.
In the Document Inspector dialog box, select the check boxes to choose the types of hidden content that you want to be inspected.
Click Inspect.
Review the results of the inspection in the Document Inspector dialog box.
Click Remove All next to the inspection results for the types of hidden content that you want to remove from your document.
質問 27
SIMULATION
Project 5 of 7: Housekeeping
Overview
You are helping to write training program modules for Contoso Suites. You are editing the second module for housekeeping associates.
Start of Shift
The first thing you should do when you start your shift is check your schedule. The shift supervisor will provide you with a printed schedule listing the rooms for which you are responsible, and a recommended order for cleaning the rooms. Unless an early cleaning is requested by the guest, check-out rooms are given priority so that we can prepare them for the next guests.
Use the inventory checklist attached to your cleaning cart to make sure that your cart is fully stocked before you begin your rounds.
Room Cleaning
When you are ready to clean a room, knock and announce yourself as "Housekeeping." Give the guest sufficient time to respond (10 to 15 seconds). If the guest does not respond, let yourself into the room and begin cleaning.
Start by cleaning the common room and sleeping areas. It is best to follow consistent steps when cleaning rooms. This will help to prevent you from missing anything. In the common room and sleeping area:
Pick up and dispose of any trash.
Empty trash cans.
If the guest has checked out, replace the sheets on each bed with fresh sheets.
Make the bed.
Leave a "Contoso Special Treat" on each pillow.
Dust all wooden furniture.
Clean the coffee station (if necessary) and restock coffee, cups, and condiment packs.
Vacuum the common room and sleeping areas.
Do not open the courtesy bar. Checking and restocking the courtesy bar is the shift supervisor's responsibility.
It is important that you give special attention to the restrooms. The most common guest complaint is about restroom cleanliness. We recommend a "top-down" cleaning method for restrooms:
Clean all mirrors.
Clean countertops and sinks.
If damp, wipe down the shower and shower curtain.
If necessary, replace toilet paper.
Replace used towels and wash cloths.
Pick up any trash and empty trash cans.
Sweep the restroom floor and mop if necessary.
Final Check
Make a final check of the room before leaving.
Are the lights turned off?
Are the TV and coffee station turned off?
Is all trash picked up and disposed of?
Is the restroom door closed?
Close the door firmly and make sure that it locks behind you. Text your supervisor with the room number.
End-of-Shift
When you are finished, dispose of all trash in the large receptacles. Drop all sheets, towels, and other lines into the laundry carts. Restock your cart so that it is ready for the next shift.
If you have more than 30 minutes left after you have completed your assigned rooms, contact your supervisor for additional assignments.
Add the watermark DO NOT COPY 1 to all pages.
正解:
解説:
See the explanation below.
Explanation:
1. Select Watermark from the Design tab.
2. Choose DO NOT COPY 1 watermark from the pre-configured watermarks.
References:
https://support.office.com/en-us/article/Insert-a-watermark-f90f26a5-2101-4a75-bbfef27ef05002de# ID0EABBAAA=Windows_-_newer
質問 28
In the ''Making moments last forever1'' section, convert the five paragraphs starting with ''Corporate events'' to a bulleted list.
正解:
解説:
Select the text you want to change into a list.
Go to Home> Bullets or Home> Numbering.
質問 29
SIMULATION
Project 6 of 7: Recall
Overview
You work in Customer Communications at Northwind Traders. You are preparing a product recall announcement.
We regret any inconvenience that this might cause you. Northwind Traders is dedicated to providing you with reliable, high-quality, and safe products.
The product sticker on the bottom of the dehydrator can determine whether or not your dehydrator is included in the recall. For affected models, there is a slight risk that the product might overheat when used, resulting in a potential burn hazard.
DO NOT RETURN TO YOUR RETAILER. Go to the Northwind traders web site at http:// www.northwindtraders.com/ and click on the "Product Recall" banner at the top of the page for return instructions. You will receive a full refund for the dehydrator and we will also ship you a replacement dehydrator.
REMINDER:
Apply the Intense Emphasis style to the text "UNPLUG AND DO NOT USE THIS DEHYDRATOR" that is located above the image.
正解:
解説:
See the explanation below.
Explanation:
1. Select the text "UNPLUG AND DO NOT USE THIS DEHYDRATOR" located above the image.
2. Choose the Intense Emphasis style from the Home tab.
References:
https://support.office.com/en-us/article/Apply-styles-f8b96097-4d25-4fac-8200-6139c8093109
質問 30
SIMULATION
Project 5 of 7: Housekeeping
Overview
You are helping to write training program modules for Contoso Suites. You are editing the second module for housekeeping associates.
Start of Shift
The first thing you should do when you start your shift is check your schedule. The shift supervisor will provide you with a printed schedule listing the rooms for which you are responsible, and a recommended order for cleaning the rooms. Unless an early cleaning is requested by the guest, check-out rooms are given priority so that we can prepare them for the next guests.
Use the inventory checklist attached to your cleaning cart to make sure that your cart is fully stocked before you begin your rounds.
Room Cleaning
When you are ready to clean a room, knock and announce yourself as "Housekeeping." Give the guest sufficient time to respond (10 to 15 seconds). If the guest does not respond, let yourself into the room and begin cleaning.
Start by cleaning the common room and sleeping areas. It is best to follow consistent steps when cleaning rooms. This will help to prevent you from missing anything. In the common room and sleeping area:
Pick up and dispose of any trash.
Empty trash cans.
If the guest has checked out, replace the sheets on each bed with fresh sheets.
Make the bed.
Leave a "Contoso Special Treat" on each pillow.
Dust all wooden furniture.
Clean the coffee station (if necessary) and restock coffee, cups, and condiment packs.
Vacuum the common room and sleeping areas.
Do not open the courtesy bar. Checking and restocking the courtesy bar is the shift supervisor's responsibility.
It is important that you give special attention to the restrooms. The most common guest complaint is about restroom cleanliness. We recommend a "top-down" cleaning method for restrooms:
Clean all mirrors.
Clean countertops and sinks.
If damp, wipe down the shower and shower curtain.
If necessary, replace toilet paper.
Replace used towels and wash cloths.
Pick up any trash and empty trash cans.
Sweep the restroom floor and mop if necessary.
Final Check
Make a final check of the room before leaving.
Are the lights turned off?
Are the TV and coffee station turned off?
Is all trash picked up and disposed of?
Is the restroom door closed?
Close the door firmly and make sure that it locks behind you. Text your supervisor with the room number.
End-of-Shift
When you are finished, dispose of all trash in the large receptacles. Drop all sheets, towels, and other lines into the laundry carts. Restock your cart so that it is ready for the next shift.
If you have more than 30 minutes left after you have completed your assigned rooms, contact your supervisor for additional assignments.
One the second numbered list that begins with "1. Clean all mirrors", modify the list to start numbering at "9".
正解:
解説:
See the explanation below.
Explanation:
1. Double-click the numbers in the list which begins with "1. Clean all mirrors".
2. Right-click on the number 1.
3. Select Set Numbering Value.
4. Then choose the number 9 in the Set value to box.
References:
https://support.office.com/en-us/article/Change-the-numbering-in-a-numbered-list-A9731137-8A85-47CEA7E4-
8B1C6C8C77A3
質問 31
In the "Banking Fees" section, convert the tab-delimited text to a two-column table. Accept the default AutoFit behavior.
正解:
解説:
Click the Insert tab and click Table in the Table section. Select Convert Text to Table from the drop-down menu.
On the Convert Text to Table dialog box, the Number of columns should already be set to 2 if you have only one tab between each item on each line. The Number of rows is automatically calculated.
Topic 5, City Power & Light
質問 32
SIMULATION
Project 1 of 7: Observation
Overview
You are a member of the Barstow College Observation Project committee. You are preparing the initial summary report for this year's count, but have not received all of the data you need to complete the report.
Introduction
The multi-departmental Wildlife Observation Project has completed its wildlife population counts for this year.
The counts were made between May 5 and May 7 for both the wilderness and cultivated land areas. This is in line with the count periods for all previous years. The species used for the counts have been identified as common for the region (central Missouri) in which the counts were taken. (Author, 2009) As in previous years, five observation blinds were set up two weeks before the counts were to take place.
Counters worked eight-hour shifts providing 24-hour coverage of the count areas for two days. Weather for both observation days was clear and mild (varying between 50-70 degrees F).
The results presented here are summary total results only, which counts from five and ten years ago provided for comparison. Detailed observation results will be available as soon as they are completed. We estimate that they will be available some time in the next two weeks.
Wilderness Summary
The wilderness observation area is a five-acre section of unimproved forest land. The most common trees in the area are maple, red oak, cedar, sweet gum, and hickory. The area also includes a small spring. The area is not enclosed by a fence or other man-made barrier.
The area is located eight miles from the nearest paved road and twelve miles from the nearest residence. Off- road vehicles were used to bring counters close to, but not entering, the count area. The nearest approach by off-road vehicles was one mile.
The table below lists the summary counts.
Though further research any analysis is needed, the drop in mourning dove and bobwhite quail counts could be significant. The detailed count data shows these numbers failing off each year.
Cultivated Land Summary
The cultivated land observation area is a five-acre section of cultivated land near the center of a 50-acre field.
The field is used to grow corn, wheat, soybeans, and clover, with the crop rotated annually. In the fifth year of the cycle, the field is left fallow.
The area is located two miles from the nearest paved road and one mile from the nearest residence. A storage barn is located at the southern border of the field.
The table below lists the summary counts.
Additional Notes
This project was initially scheduled to run for ten years, so we are currently in our last year. The committee needs to decide if it is worth the time and expense to continue the project. The landowners have experience that they would be happy to let us continue. Costs relating to the project is minimal and it does provide an opportunity to offer extra credit to students volunteering as counters.
A suggestion has been made by some committee members that we should increase the count frequency, counting on a quarterly schedule instead of an annual schedule. This would need to be coordinated with the owner of the cultivated field so that we do not interfere with planting or harvesting schedules.
Special Thanks
Once again, we would like to offer special thanks to:
We couldn't do this without you.
The spacing between words in the first two paragraphs is off. View only the tab and space formatting symbols to troubleshoot the problem. You do not need to remove the extra tabs or spaces.
正解:
解説:
See the explanation below.
Explanation:
1. On the Home tab in the Paragraph group is a space and formatting symbol which is the Show/Hide button.
2. To toggle it on and off you select the space and formatting symbol it would be shaded when turned on.
References:
https://support.office.com/en-us/article/Show-or-hide-formatting-marks-c2d8a607-5646-4165-8b08- bd68f9d172a0
質問 33
In the ''Favorite dinosaurs'' section, in the blank paragraph at the end of the page, use the 3D Model feature to insert the Triceratops from the 3D objects folder.
Position the model in Line with Text.
正解:
解説:
On the Insert tab, in the Illustrations group, click 3D Models > From a File.
Navigate to where your 3D object is, select it and click Insert. Once inserted and still selected, you will see some handles with which to manipulate the object.
These handles look like the usual ones that allow you to resize and rotate an object. However, if you hover your mouse roughly over the centre of the object, you should see the cursor change shape to indicate that you can rotate the model in 3D space. Like this:
Once you have rotated the model, the 3D rotate handle will appear in the centre of the object and using this will make it easier to rotate the object.
While the object is selected, you will see the 3D Model Tools contextual tab displayed in the ribbon.
質問 34
In the ''Overview'' section, apply the Soft Round bevel shape effect to the SmartArt graphic. (Be sure to select the entire SmartArt graphic.)
正解:
解説:
To create a new line of bulleted text in the Text pane, press Enter. To indent a line in the Text pane, select the line that you want to indent, and then under SmartArt Tools, on the Design tab, click Demote. To negatively indent a line, click Promote. You can also press Tab to indent or Shift+Tab to negatively indent from within the Text pane.
If you don't see the SmartArt Tools or Design tabs, double-click the SmartArt graphic.
質問 35
SIMULATION
Project 1 of 7: Observation
Overview
You are a member of the Barstow College Observation Project committee. You are preparing the initial summary report for this year's count, but have not received all of the data you need to complete the report.
Introduction
The multi-departmental Wildlife Observation Project has completed its wildlife population counts for this year.
The counts were made between May 5 and May 7 for both the wilderness and cultivated land areas. This is in line with the count periods for all previous years. The species used for the counts have been identified as common for the region (central Missouri) in which the counts were taken. (Author, 2009) As in previous years, five observation blinds were set up two weeks before the counts were to take place.
Counters worked eight-hour shifts providing 24-hour coverage of the count areas for two days. Weather for both observation days was clear and mild (varying between 50-70 degrees F).
The results presented here are summary total results only, which counts from five and ten years ago provided for comparison. Detailed observation results will be available as soon as they are completed. We estimate that they will be available some time in the next two weeks.
Wilderness Summary
The wilderness observation area is a five-acre section of unimproved forest land. The most common trees in the area are maple, red oak, cedar, sweet gum, and hickory. The area also includes a small spring. The area is not enclosed by a fence or other man-made barrier.
The area is located eight miles from the nearest paved road and twelve miles from the nearest residence. Offroad vehicles were used to bring counters close to, but not entering, the count area. The nearest approach by off-road vehicles was one mile.
The table below lists the summary counts.
Though further research any analysis is needed, the drop in mourning dove and bobwhite quail counts could be significant. The detailed count data shows these numbers failing off each year.
Cultivated Land Summary
The cultivated land observation area is a five-acre section of cultivated land near the center of a 50-acre field.
The field is used to grow corn, wheat, soybeans, and clover, with the crop rotated annually. In the fifth year of the cycle, the field is left fallow.
The area is located two miles from the nearest paved road and one mile from the nearest residence. A storage barn is located at the southern border of the field.
The table below lists the summary counts.
Additional Notes
This project was initially scheduled to run for ten years, so we are currently in our last year. The committee needs to decide if it is worth the time and expense to continue the project. The landowners have experience that they would be happy to let us continue. Costs relating to the project is minimal and it does provide an opportunity to offer extra credit to students volunteering as counters.
A suggestion has been made by some committee members that we should increase the count frequency, counting on a quarterly schedule instead of an annual schedule. This would need to be coordinated with the owner of the cultivated field so that we do not interfere with planting or harvesting schedules.
Special Thanks
Once again, we would like to offer special thanks to:
We couldn't do this without you.
Merge all cells in the bottom row of the table below the "Wilderness Summary" heading into one cell.
正解:
解説:
See the explanation below.
Explanation:
1. Select the cells in the bottom row of the table below the "Wilderness Summary" which you want to merge.
2. Under Table Tools, on the Layout tab, in the Merge group, select Merge Cells.
OR
1. Select the cells in the bottom row of the table below the "Wilderness Summary" which you want to merge.
2. Right click and select Merge Cells.
References:
https://support.office.com/en-us/article/Merge-or-split-cells-in-a-table-8B458DEB-0FC5-4C8D-8D94-
2D4DA98193F8
質問 36
You work for Fourth Coffee. You are finalizing a training manual for employees who will bake muffins for the coffee shop.
Display the Integral header on all pages of the documents except page 1.
正解:
解説:
Step 1: Click the "Insert" tab from the Ribbon;
Step 2: Click the "Header" (or "Footer") command from the "Header&Footer" section;
Step 3: Select one style from the drop-down list (e.g., the Austin style);
Step 4: In the "Design" tab (or Header & Footer tab if Microsoft 365) from the ribbon, check the "Different First Page" command;
Now the header or footer on the first page is different from all other pages. You can delete the contents and formatting in the header or footer on the first page if you want to leave it empty.
質問 37
SIMULATION
Project 7 of 7: Coffee
Overview
You are preparing a flyer for use at a commercial foods trade show. You are editing the document in response to client requests.
Apply the Soft Round Bevel picture effect to the image of a coffee cup on a saucer.
正解:
解説:
See the explanation below.
Explanation:
1. Select the image of the coffee cup on a saucer which you want to add the effect to.
2. Click Picture Effects from the Picture Styles group in the Format tab under the Picture Tools.
3. Render the cursor over the Bevel option from the Picture Effects options, then select the Soft Round option.
References:
https://support.office.com/en-us/article/Add-or-change-an-effect-for-a-picture-D9F0F1F2-5227-450F-95B4-
25FFDDDBD965
25FFDDDBD965
質問 38
......
無料Microsoft Certification MO-100試験問題：https://www.jpntest.com/shiken/MO-100-mondaishu