実践サンプルと問題集と指導には2021年最新のNSE7_SDW-6.4有効なテスト問題集
最新 [2021年12月20日] 100%合格率保証付きの素晴らしいNSE7_SDW-6.4試験問題PDF
質問 19
What is the lnkmtd process responsible for?
- A. Monitoring links for any bandwidth saturation
- B. Processing performance SLA probes
- C. Logging interface quality information
- D. Flushing route tags addresses
正解: C
質問 20
Which components make up the secure SD-WAN solution?
- A. Datacenter, branch offices, and public cloud
- B. Application, antivirus, and URL, and SSL inspection
- C. Telephone, ISDN, and telecom network.
- D. FortiGate, FortiManager, FortiAnalyzer, and FortiDeploy
正解: B
質問 21
What are two roles that SD-WAN orchestrator plays when it works with FortiManager? (Choose two )
- A. It acts as a hub FortiGate with an SD-WAN interface enabled and managed along with other FortiGate devices by FortiManager.
- B. It configures and monitors SD-WAN networks on FortiGate devices that are managed by FortiManager.
- C. It acts as a standalone device to assist FortiManager to manage SD-WAN interfaces on the managed FortiGate devices.
- D. It acts as an application that is released and signed by Fortinet to run as a part of management extensions on FortiManager.
正解: C,D
質問 22
Refer to the exhibit.
What must you configure to enable ADVPN?
- A. On the hub VPN, only the device needs additional phase one sett
- B. Each VPN device has a unique pre-shared key configured separately on phase one
- C. The protected subnets should be set to address object to all (0.0 .0. o/o).
- D. ADVPN should only be enabled on unmanaged FortiGate devices.
正解: B
質問 23
Refer to the exhibit.
FortiGate has multiple dial-up VPN interfaces incoming on portl that match only FIRSTJVPN.
Which two configuration changes must be made to both IPsec
VPN interfaces to allow incoming connections to match all possible IPsec dial-up interfaces? (Choose two )
- A. Use different proposals are used between the interfaces.
- B. Configure the IKE mode to be aggressive mode
- C. Use unique Diffie Hellman groups on each VPN interface
- D. Configure a unique peer ID for each dial-up VPN interface
正解: B,D
質問 24
Which diagnostic command you can use to show interface-specific SLA logs for the last 10 minutes?
- A. diagnose sys virtual-wan-link intf-sla-log
- B. diagnose sys virtual-wan-link sla-log
- C. diagnose sys virtual-wan-link health-check
- D. diagnose sys virtual-wan-link log
正解: B
解説:
Explanation/Reference: https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/943037/sla-logging
質問 25
Refer to the exhibit.
Which statement about the command route-tag in the SD-WAN rule is true?
- A. It enables the SD-WAN rule to load balance and assign traffic with a route tag
- B. It ensures route tags match the SD-WAN rule based on the rule order
- C. It uses route tags for a BGP community and assigns the SD-WAN rules with same tag.
- D. It tags each route and references the tag in the routing table.
正解: B
質問 26
Refer to exhibits.
Exhibit A.
Exhibit B.
Exhibit A shows the SD-WAN rules and exhibit B shows the traffic logs. The SD-WAN traffic logs reflect how FortiGate processed traffic.
Which two statements about how the configured SD-WAN rules are processing traffic are true? (Choose two.)
- A. The All_Access_Rules rule load balances Vimeo application traffic among SD-WAN member interfaces
- B. SD-WAN rules are evaluated in the same way as firewall policies: from top to bottom
- C. The initial session of an application goes through a learning phase in order to apply the correct rule
- D. The implicit rule overrides all other rules because parameters widely cover sources and destinations.
正解: C,D
質問 27
Which statement defines how a per-IP traffic shaper of 10 Mbps is applied to the entire network?
- A. FortiGate allocates each IP address a maximum 10 Mbps of bandwidth.
- B. A single user uses the allocated bandwidth divided by total number of users.
- C. Each IP is guaranteed a minimum 10 Mbps of bandwidth.
- D. The 10 Mbps bandwidth is shared equally among the IP addresses.
正解: A
解説:
Explanation/Reference:
https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/885253/per-ip-traffic-shaper
質問 28
An administrator is troubleshooting VoIP quality issues that occur when calling external phone numbers The SD-WAN interface on the edge FortiGate is configured with the default settings, and is using two upstream links One link has random jitter and latency issues and is based on a wireless connection Which two actions must the administrator apply simultaneously on the edge FortiGate to improve VoIP quality using SD_WAN rules?
- A. Place the troublesome link at the top of the interface preference list.
- B. Select the corresponding SD-WAN balancing strategy in the SD-WAN rule.
- C. Configure an SD-WAN rule to load balance all traffic without VoIP.
- D. Use the performance SLA targets to detect latency and jitter instantly.
- E. Choose the suitable interface based on the interface cost and weight.
正解: B,D
質問 29
Refer to exhibits.
Exhibit B.
Exhibit A shows the firewall policy and exhibit B shows the traffic shaping policy.
The traffic shaping policy is being applied to all outbound traffic however inbound traffic is not being evaluated by the shaping policy Based on the exhibit, what configuration change must be made in which policy so that traffic shaping can be applied to inbound traffic'?
- A. The reverse shaper option must be enabled and a traffic shaper must be selected
- B. The guaranteed-10mbps option must be selected as the per-IP shaper option
- C. The guaranteed-10mbps option must be selected as the reverse shaper option.
- D. A new firewall policy must be created and SD-WAN must be selected as the incoming interface.
正解: C
質問 30
In the default SD-WAN minimum configuration, which two statements are correct when traffic matches the default implicit SD-WAN rule? (Choose two )
- A. An absolute SD-WAN rule was defined and matched traffic.
- B. Matched traffic failed RPF and was caught by the rule.
- C. The FIB lookup resolved interface was the SD-WAN interface.
- D. Traffic has matched none of the FortiGate policy routes.
正解: C,D
質問 31
What are two benefits of using FortiManager to organize and manage the network for a group of FortiGate devices? (Choose two )
- A. It acts as a policy compliance entity to review all managed FortiGate devices.
- B. It improves SD-WAN performance on the managed FortiGate devices.
- C. It simplifies the deployment and administration of SD-WAN on managed FortiGate devices.
- D. It reduces WAN usage on FortiGate devices by acting as a local FortiGuard server.
- E. It sends probe signals as health checks to the beacon servers on behalf of FortiGate.
正解: A,B
質問 32
What are two reasons why FortiGate would be unable to complete the zero-touch provisioning process? (Choose two.)
- A. The FortiGate cloud key has not been added to the FortiGate cloud portal.
- B. FortiDeploy has connected with FortiGate and provided the initial configuration to contact FortiManager
- C. The zero-touch provisioning process has completed internally, behind FortiGate.
- D. FortiGate has obtained a configuration from the platform template in FortiGate cloud.
- E. A factory reset performed on FortiGate.
正解: A,C
質問 33
Refer to the exhibit.
Based on the exhibit, which statement about FortiGate re-evaluating traffic is true?
- A. Changes have been made on firewall policy ID 1 on FortiGate.
- B. FortiGate has terminated the session after a change on policy ID 1.
- C. The type of traffic defined and allowed on firewall policy ID 1 is UDP.
- D. Firewall policy ID 1 has source NAT disabled.
正解: C
質問 34
Refer to the exhibit.
Based on the output shown in the exhibit, which two criteria on the SD-WAN member configuration can be used to select an outgoing interface in an SD-WAN rule? (Choose two.)
- A. Set load-balance-mode source-ip-ip-based.
- B. Set cost 15.
- C. Set source 100.64.1.1.
- D. Set priority 10.
正解: C
質問 35
What are the two minimum configuration requirements for an outgoing interface to be selected once the SD-WAN logical interface is enabled? (Choose two )
- A. Select SD-WAN balancing strategy.
- B. Configure SD-WAN rules interface preference.
- C. Specify incoming interfaces in SD-WAN rules.
- D. Specify outgoing interface routing cost.
正解: B
質問 36
Refer to the exhibit.
Which two statements about the debug output are correct? (Choose two )
- A. Traffic being controlled by the traffic shaper is under 1 Kbps.
- B. This traffic shaper drops traffic that exceeds the set limits.
- C. The debug output shows per-IP shaper values and real-time readings.
- D. FortiGate provides statistics and reading based on historical traffic logs.
正解: B,C
質問 37
Refer to exhibits.
Exhibit A shows the firewall policy and exhibit B shows the traffic shaping policy.
The traffic shaping policy is being applied to all outbound traffic; however, inbound traffic is not being evaluated by the shaping policy.
Based on the exhibits, what configuration change must be made in which policy so that traffic shaping can be applied to inbound traffic?
- A. The reverse shaper option must be enabled and a traffic shaper must be selected
- B. The guaranteed-10mbps option must be selected as the per-IP shaper option
- C. The guaranteed-10mbps option must be selected as the reverse shaper option.
- D. A new firewall policy must be created and SD-WAN must be selected as the incoming interface.
正解: C
質問 38
An administrator is troubleshooting VoIP quality issues that occur when calling external phone numbers. The SD-WAN interface on the edge FortiGate is configured with the default settings, and is using two upstream links. One link has random jitter and latency issues, and is based on a wireless connection.
Which two actions must the administrator apply simultaneously on the edge FortiGate to improve VoIP quality using SD-WAN rules? (Choose two.)
- A. Place the troublesome link at the top of the interface preference list.
- B. Select the corresponding SD-WAN balancing strategy in the SD-WAN rule.
- C. Configure an SD-WAN rule to load balance all traffic without VoIP.
- D. Use the performance SLA targets to detect latency and jitter instantly.
- E. Choose the suitable interface based on the interface cost and weight.
正解: B,D
質問 39
Which diagnostic command can you use to show the SD-WAN rules interface information and state?
- A. diagnose sys virtual-wan-link member.
- B. diagnose sys virtual-wan-link service
- C. diagnose sys virtual-wan-link neighbor.
- D. diagnose sys virtual-wan-link route-tag-list
正解: C
質問 40
......
Fortinet NSE7_SDW-6.4 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
NSE7_SDW-6.4時間限定！無料アクセス：https://www.jpntest.com/shiken/NSE7_SDW-6.4-mondaishu