最新（2023)Salesforce OMS-435試験問題集 [Q42-Q63]

最新（2023)Salesforce OMS-435試験問題集

最適な練習法にはSalesforce OMS-435試験の素晴らしいOMS-435試験問題PDF

Salesforce OMS-435試験は、Omnistudioでガイド付きエクスペリエンスを構築し、SalesforceのOmnistudioプラットフォームを使用して企業のガイド付きエクスペリエンスを作成および管理する候補者の能力を評価するように設計されています。この試験は、Salesforceとの協力の経験があり、企業向けのカスタムソリューションを作成する際の知識とスキルを促進したい個人向けです。

試験は、ガイドエクスペリエンスの基礎、OmniStudio を使用してガイドエクスペリエンスを作成する方法、データと分析を使用してガイドエクスペリエンスを最適化する方法、およびガイドエクスペリエンスの管理など、さまざまなトピックをカバーしています。また、個人の OmniStudio を構成およびカスタマイズし、特定のビジネス要件を満たす能力も評価されます。

質問 # 42
A developer is building an OmniScript and needs to retrieve data from Salesforce and from an on-premises billing database.
Which two OmniScript elements could retrieve this data?
Choose 2 answers

A. DataRaptor Extract Action
B. Navigate Action
C. Response Action
D. HTTP Action

正解：A

質問 # 43
Refer to the exhibit.
What JSON from the DRGetAccountDetails action would display all six values correctly in the OmniScript structure shown? BlkContacts is a Repeat Block.

A)

B)

C)

D)

A. Option A
B. Option D
C. Option C
D. Option B

正解：C

質問 # 44
In an OmnoScript, a developer needs to configure a Disclosure element to require user input only if the user already checked a Non-Disclosure Agreement Checkbox.
How should the developer configure the conditional view to meet this requirement?

A. Show element if true
B. Set element to require if true
C. Set element to optional if false
D. Disable read only if true

正解：A

質問 # 45
A developer is creating a FlexCard and needs to display additional information using a Flyout.
Which two types of components can the developer embed in the flyout?
Choose 2 answer

A. A Child FlexCard
B. An OmniScript
C. A DataRaptor
D. An Integration Procedure

正解：A、D

質問 # 46
A developer examines data received from an external data source. The data is nested two levels down in the JSON structure.
Which OmniStudio tool could the developer use to simplify this data?

A. A DataRaptor Transform
B. An HTTP Action Element
C. An integration Procedure
D. A guided workflow

正解：A

質問 # 47
A developer needs to build a multi-step intake form. Each step must allow the user to cancel the intake at any time. The developer is using an LWC OmniScript to build the form.
How should the developer implement the cancel functionality for all steps using the LWC OmniScript Designer?

A. Add a navigation Action inside each step and set the Element Name to ''Cancel'',
B. Add a navigation Action outside each step and set the Element Name to ''Cancel'',
C. Check the Enable Cancel checkbox in the Setup tab under Cancel Options.
D. Add a navigation Action inside each step and set the Component name to ''Cancel'',

正解：C

質問 # 48
Refer to the exhibit.

A developer creates an OmniScript display FirstName, LastName, and BirthDate of a contact using a Type Ahead Block. The DataRaptor used in the Type Ahead has been tested and fetches the correct data.
When previewing Omniscript, the developer enters a name in the Type Ahead and makes a selection of a contact from the list. However, the text fields FirstName. LastName, and BirthDate are not getting populated with the data.
What is the reason that the fields fail to display the fetched data?

A. Use Data JSON is not selected in the properties of the Type Ahead Block.
B. FirstName, LastName, and BirthDate are not placed inside the Type ahead Block.
C. The Typeghead ley is not in the correct format
D. Lookup Mode is not selected in the properties of the Type A Head Block.

正解：B

質問 # 49
Refer to the exhibit below. In this Integration Procedure structure, what Send JSON Path would you use to send the output of the ActionZ element to a Response Action?

A. ActionZ:BlockY:BlockX
B. ActionZ:BlockY:BlockX
C. BlockX.BlockYActionZ
D. BlockX:BlockY:ActionAZ

正解：D

質問 # 50
Refer to the exhibit below. A developer has configured an integration Procedure element with Additional input.
Alternatively, how could the developer configure SEND/RESPONSE TRNSFORMATION to send exactly the same data? Assume the developer has un-checked Send Only Additional input.

正解：A

質問 # 51
A customer sets up two LWC OmniScripts, one embedded into another. AccountId is set in a Set Values element in the parent OmniScript. The Accountid set in the parent OmniScript is used to set another Set values element ContextAccountId in the emvedded OmniScript. The embedded OmniScript is activated.
While previewing the OmniScript flow from the parent, it is found that Account I set correct in the parent OmniScript. However ContextAccount in the embedded OmniScript is not set with the Accountid from parent OmniScript. On previewing the embedded OmniScript individually. It is found that ContextAccountId is set correctly.
What is the reason for this? Refer to the exhibit below.

A. The flag passData.JSON in the parent OmniScript in not configured correctly.
B. The WLC PubSub Messge flag in the Set Values action of the parent OmniScript has not been set.
C. A developer failed to include a Navigate Action Element to pass data from the parent OmniScript.
D. Both parent and embedded OmniScripts have the same element name for the Set Values element.

正解：B

質問 # 52
A developer is configuring an integration Procedure Action in an OmniScript. The Omniscript needs a JSON response from the Integration Procedure but does not need to wait for the response for the user to proceed.
Which feature should the developer enable?

A. Toast Completion
B. Invoke Mode Non-Blocking
C. Invoke Mode Fire and Forget
D. Use Future

正解：B

質問 # 53
In an Integration Procedure, a developer needs to perform a multi-step calculation on every element of an array.
Based on best practices, what two methods are recommended?
Choose 2 answers

A. Use a Set Values Element inside a Loop Block.
B. Use a Decision Matrix Action to call a Decision Matrix.
C. Use a List Action to merge the array elements together.
D. Use an Expression Set Action to call an Expression Set.

正解：A、D

質問 # 54
A developer creates an Integration Procedure with a Set Values and a DataRaptor Extract Action that requires AccountId as a key. When the developer previews the Integration Procedure, the developer enters the AccountId correctly and execute the Preview. The developer sees the data extract by the DataRaptor in the Debug Log, but the response is empty.
What is the likely cause of this issue?

A. The AccountId used for the preview is invalid.
B. The Response cannot be previewed directly.
C. A Response Action was not added to the integration Procedure.
D. The DataRaptor Action did not have the add response Ro Response JSON property set to true.

正解：C

質問 # 55
A customer has a new Engagement Manager who is going to be the new Primary Contact for the Account.
What type of mapping does a DataRaptor Load use to create the new contact and then add it as the new Primary Contact?

A. Lookup Mapping
B. Lookup Key
C. Linked Mapping
D. Relationship Query

正解：C

質問 # 56
Refer to the following row-versioned calculation matrix.

The developer needs to delete the row that contains the Code CA-SF.
If the developer deletes that row in Version 3, what is the result?

A. The row is deleted in all versions
B. The row is deleted In Versions 2 and 3 but will remain in Version 1.
C. The row is deleted in Version 3 and Version 1.
D. The row is delete only in Version 3.

正解：D

質問 # 57
A developer creates an OmniScript to update billing information. After analyzing the different types of customer interactions that occur at the company, the developer determines updating billing information should be included in the majority of customer interactions, which are represented by more than 20 different FlexCards.
What is the most efficient way for the developer to configure the action that invokes the OmniScript?

A. As an OmniStudio Action
B. As an OS Action
C. As a Custom Action
D. As a Lightning Action

正解：B

質問 # 58
Which two fields in an Integration Procedure can use a function like CONCAT or DATEDIFF?
Choose 2 answers

A. In a Response Action, in an Additional input value field.
B. In a Remote Action, in an Additional Output value field.
C. In Procedure Configuration, in a Tracking Custom Data value field.
D. In a Remote Action, in a Remote Options value field.

正解：A、B

質問 # 59
What OmniStudio tool pre-populates the data m a PDF used by an OmniScript?

A. A DataRaptor Load
B. A DataRaptor Transform
C. A SOQL Query
D. A DataRaptor Extract

正解：B

質問 # 60
A developer is configuring a DataRaptor Load to Save contract data. The developer needs to set the record type of the contact using DeveloperName.
Which two configuration actions should the developer take to set this up in the DataRaptor Load?

A. Check is Lookup property when mapping the fields.
B. Add Link to RecordType object in the Contact Object with the id field of RecordType object.
C. Select RecordType in the Lookup Object list. ID in the Lookup Field list, and Development in the Lookup requested Field list.
D. Select RecordType in the Lookup object list. Development in the lookup Field list, and ID in the Lookup Requested Field list.

正解：A、D

質問 # 61
Refer to the exhibit.

What JSON code correct represent the step in the OmniScript Structure panel shown?