[2023年最新] 最高のOMS-435試験問題集を使って- 実際の試験問題と解答を解こう
テストエンジンを練習してOMS-435テスト問題
質問 # 20
A healthcare company wants to enable its subscribers to add, edit, or delete dependents related to their policy Community portal. The developer on the project decides to use an MniScript.
How should the developer configure the OmniScript to provide this functionality?
- A. Use an Edit Block element configured with SOQL statements.
- B. Use an Input Block element and a DataRaptor Post Action element.
- C. Use a Text Block element and a Remote Action element.
- D. Use an Edit Block element configured with Remote Actions.
正解：D
質問 # 21
Refer to the exhibit.
All inputs to the Calculation Matric are set correctly.
The Calculation Matrix has the following input:
What is the output?
- A. 13.99
- B. Null
- C. 12.99,13.99
- D. 12.99
正解：A
質問 # 22
A developer needs to display read-only contact information in a OmniScript. The developer will format the information as a table, using merge codes to dynamically include first name, last name, street address, state, postal, code, and country from the data JSON.
Which OmniScript element should the developer use to meet this requirement?
- A. Text Block
- B. Edit Block
- C. Rich text Area
- D. Text area
正解：A
質問 # 23
Refer to the exhibit below.
What is the reason that the fields fail to display the fetched data?
- A. Use Data JSON is Not selected in the properties of the Type Ahead Block.
- B. Lookup Mode is selected in the properties of the Type Ahead Block.
- C. The typeHead key is not in the correct format.
- D. FirstName, LastName, and BirthDate are not placed inside the Type Ahead Block.
正解：D
質問 # 24
A customer sets up two LWC OmniScripts, one embedded into another. AccountId is set in a Set Values element in the parent OmniScript. The Accountid set in the parent OmniScript is used to set another Set values element ContextAccountId in the emvedded OmniScript. The embedded OmniScript is activated.
While previewing the OmniScript flow from the parent, it is found that Account I set correct in the parent OmniScript. However ContextAccount in the embedded OmniScript is not set with the Accountid from parent OmniScript. On previewing the embedded OmniScript individually. It is found that ContextAccountId is set correctly.
What is the reason for this? Refer to the exhibit below.
- A. The WLC PubSub Messge flag in the Set Values action of the parent OmniScript has not been set.
- B. A developer failed to include a Navigate Action Element to pass data from the parent OmniScript.
- C. The flag passData.JSON in the parent OmniScript in not configured correctly.
- D. Both parent and embedded OmniScripts have the same element name for the Set Values element.
正解：A
質問 # 25
A developer is configuring a DataRaptor Load to Save contract data. The developer needs to set the record type of the contact using DeveloperName.
Which two configuration actions should the developer take to set this up in the DataRaptor Load?
- A. Check is Lookup property when mapping the fields.
- B. Select RecordType in the Lookup Object list. ID in the Lookup Field list, and Development in the Lookup requested Field list.
- C. Add Link to RecordType object in the Contact Object with the id field of RecordType object.
- D. Select RecordType in the Lookup object list. Development in the lookup Field list, and ID in the Lookup Requested Field list.
正解：A、D
質問 # 26
Refer to the exhibit below. A developer has configured an integration Procedure element with Additional input.
Alternatively, how could the developer configure SEND/RESPONSE TRNSFORMATION to send exactly the same data? Assume the developer has un-checked Send Only Additional input.
A)
B)
C)
D)
- A. Option A
- B. Option D
- C. Option C
- D. Option B
正解：B
質問 # 27
A developer is building an OmniScript and needs to retrieve data from a single field in a Salesforce record.
Which OmniScript element does this?
- A. DataRaptor Post Action
- B. Select
- C. Lookup
- D. HTTP Action
正解：C
質問 # 28
A developer is creating an OmniScript that Provisions trial orgs to their customers. The following text block in the OmniScript uses a merge code to display the ID for the new trial org:
Welcome to Salesforce
Your ID is %Details: Customer10:ID%
During testing, the developer notices that the ID does not display. The data JSON is structured as shown below.
How should the developer correct the merge code in order for the ID to display?
- A. To %%Details:Customer|1:ID%
- B. To %%Details:Customer|0:ID%%
- C. To $Details:Customer|0:ID$
- D. To %%Details:Customer|n:ID%
正解：A
質問 # 29
A developer has a requirement to create a child FlexCard that contain all of its parent FlexCard's records in a Datatable.
- A. {recordId}
- B. {Params records}
- C. {Records}
- D. {Records[0]}
正解：C
質問 # 30
Refer to the exhibit.
A developer creates an OmniScript display FirstName, LastName, and BirthDate of a contact using a Type Ahead Block. The DataRaptor used in the Type Ahead has been tested and fetches the correct data.
When previewing Omniscript, the developer enters a name in the Type Ahead and makes a selection of a contact from the list. However, the text fields FirstName. LastName, and BirthDate are not getting populated with the data.
What is the reason that the fields fail to display the fetched data?
- A. FirstName, LastName, and BirthDate are not placed inside the Type ahead Block.
- B. Lookup Mode is not selected in the properties of the Type A Head Block.
- C. Use Data JSON is not selected in the properties of the Type Ahead Block.
- D. The Typeghead ley is not in the correct format
正解：A
質問 # 31
Refer to the exhibit.
The card layout uses an integration Procedure as a data source. The cards use the layout data source.
Which JSON data structure supports this card layout and follows best practices?
- A.
- B.
- C.
正解：B
質問 # 32
A developer has a requirement to create a child FlexCard that contains all of its parent FlexCard's records In a Datable How should the developer configure the parent FlexCard's Node?
- A. {Params, records}
- B. {Recorded}
- C. {Records{0}}
- D. {Records}
正解：D
質問 # 33
A developer is building an OmniScript and needs to retrieve data from Salesforce and from an on-premises billing database.
Which two OmniScript elements could retrieve this data?
Choose 2 answers
- A. Navigate Action
- B. HTTP Action
- C. Response Action
- D. DataRaptor Extract Action
正解：B、D
質問 # 34
A developer creates a new FlexCard to display customer data and actions, such as updating billing information and changing the contact for the customer account. The FlexCard contains 10 fields and 5 actions.
During testing, several fields display with the correct data, but one of the fields shows only the label.
What could cause this?
- A. The fields have exceeded the maximum number allowed on the card.
- B. There are no test parameters configured.
- C. The field is null 0 the Salesforce record.
- D. {recordld} us misspelled in the Data Source Input Map.
正解：A
質問 # 35
A developer creates a FlexCard with five state elements. For of the states have a condition. To test the FlexCard, the developer previews it using sample data that causes two of the states to have true conditions.
In this scenario, how will the developer know which state will display?
- A. The first state with a true AND condition, regardless of sequence in the FlexCard canvas, will display.
- B. The state sequenced first in the FlexCard canvas will display.
- C. The first state with true conditions sequence closest to the top of the FlexCard canvas will display.
- D. The first state with true nested condition, regardless of sequence in the FlexCard canvas, will display
正解：C
質問 # 36
A customer sets up two LWC OmniScripts, one embedded into another. AccountId is set in a Set Values element in the parent OmniScript. The Accountid set in the parent OmniScript is used to set another Set values element ContextAccountId in the emvedded OmniScript. The embedded OmniScript is activated.
While previewing the OmniScript flow from the parent, it is found that Account I set correct in the parent OmniScript. However ContextAccount in the embedded OmniScript is not set with the Accountid from parent OmniScript. On previewing the embedded OmniScript individually. It is found that ContextAccountId is set correctly.
What is the reason for this? Refer to the exhibit below.
- A. The WLC PubSub Messge flag in the Set Values action of the parent OmniScript has not been set.
- B. A developer failed to include a Navigate Action Element to pass data from the parent OmniScript.
- C. The flag passData.JSON in the parent OmniScript in not configured correctly.
- D. Both parent and embedded OmniScripts have the same element name for the Set Values element.
正解：A
質問 # 37
A developer creates a new FlexCard to display customer data and actions, such as updating billing information and changing the contact for the customer account. The FlexCard contains 10 fields and 5 actions.
During testing, several fields display with the correct data, but one of the fields shows only the label.
What could cause this?
- A. The field is null 0 the Salesforce record.
- B. The fields have exceeded the maximum number allowed on the card.
- C. There are no test parameters configured.
- D. {recordld} us misspelled in the Data Source Input Map.
正解：A
質問 # 38
Refer to the exhibit below. In this integration production structure, what Send JSON Path would be used to send the Output of the Action1 element to a Remote Action?
- A. BlockA: BlockB. Action 1
- B. BlockB: BlockB. Action1
- C. Action1. BlockB. Block A
- D. Action1: BlockB. Block A
正解：D
質問 # 39
In an Integration Procedure, a developer needs to perform a multi-step calculation on every element of an array.
Based on best practices, what two methods are recommended?
Choose 2 answers
- A. Use an Expression Set Action to call an Expression Set.
- B. Use a Decision Matrix Action to call a Decision Matrix.
- C. Use a List Action to merge the array elements together.
- D. Use a Set Values Element inside a Loop Block.
正解：A、D
質問 # 40
Refer to the exhibit below. A developer has configured an integration Procedure element with Additional input.
Alternatively, how could the developer configure SEND/RESPONSE TRNSFORMATION to send exactly the same data? Assume the developer has un-checked Send Only Additional input.
- A.
- B.
- C.
- D.
正解：B
質問 # 41
What OmniStudio tool pre-populates the data m a PDF used by an OmniScript?
- A. A SOQL Query
- B. A DataRaptor Extract
- C. A DataRaptor Load
- D. A DataRaptor Transform
正解：D
質問 # 42
A developer is creating an OmniScript that provisions trail orgs to their customers. The following text block in the Omniscript uses a merge code to display the ID for the new trail org:
- A. To %Details: Customer|1: ID%
- B. To %%sDetails: Customer|0: ID%%
- C. To %sDetails: Customer|0: ID$
- D. To %Details: Customer|n: ID%
正解：A
質問 # 43
A developer has an existing DataRaptor Load that insert Contact records with inputs as LastName and firstName. The DataRaptor works as expected when previewed.
The developer creates an integration Procedure to test the DataRaptor and is using a SetValues element in the Integration Procedure to set the first name and last name for the contact record. The DataRaptor and Integration Procedure are set up as shown in the exhibit below.
When the developer executes the Integration procedure in preview, the following error message displays: Required fields are missing: [last Name]'', How should the developer address this issue?
- A. The Set values Action Keys should include the DataRaptor Post Action element name path, e,g LoadContactDetails, lastname
- B. The valid field names should be added in the Domain object field in the DataRaptor
- C. The DataRaptor Post Action in the integration procedure should have been executed before the Set Values Action
- D. SetValuesContactDetails should have been added to Additional input of DataRaptor Post Action in Integration Procedure
正解：D
質問 # 44
Refer to the exhibit.
What JSON from the DRGetAccountDetails action would display all six values correctly in the OmniScript structure shown? BlkContacts is a Repeat Block.
A)
B)
C)
D)
- A. Option A
- B. Option C
- C. Option D
- D. Option B
正解：B
質問 # 45
......
Salesforce OMS-435認定試験では、ガイド付きエクスペリエンス、Omnistudioコンポーネント、開発プロセスの基本など、幅広いトピックをカバーしています。候補者は、Omnistudioのドラッグアンドドロップインターフェイスを使用してガイド付きエクスペリエンスを設計および構築する方法と、特定のビジネスニーズを満たすためにコンポーネントをカスタマイズする方法を学びます。また、Apex、VisualForce、Lightning Webコンポーネントを使用してOmnistudioの機能を拡張する方法と、他のSalesforce製品やサードパーティシステムと統合する方法も学びます。
OMS-435実際の問題アンサーPDFには100%カバー率リアルな試験問題：https://www.jpntest.com/shiken/OMS-435-mondaishu
OMS-435リアルな試験問題テストエンジン問題集トレーニング85問題：https://drive.google.com/open?id=1zPgnh81yc_sN8KUp-tgozEfcf-Eb_7pT