無料でゲット！2024年最新のに更新されたHP HPE2-T37試験問題と解答
HPE2-T37問題集PDFとテストエンジン試験問題
HP HPE2-T37（HPE OneViewを使用）認証試験は、40の複数選択と複数の応答の質問で構成される60分間の試験です。この試験は英語と日本語の言語で入手でき、ピアソンvueテストセンターまたはオンラインで撮影できます。この試験の合格スコアは65％で、試験料は150ドルです。
質問 # 44
You ate implementing an HPE Synergy solution with multiple frames in one management ring. Image Streamer is not a part of this solution. How can an IPv4 address pool defined by the administrator be used In HPE OneView?
- A. to provide static IP addresses to IL0 and interconnect modules if applicable
- B. to provide static IP addresses for an operating system running on a Compute Module
- C. to provide static IP addresses for storage systems managed in HPE OneView
- D. to provide static IP addresses for Logical Interconnects and Logical Enclosures
正解：B
質問 # 45
Refer to the exhibit.
Which statement about server connections is true?
- A. All connections within the server profile are using physical IDs
- B. LACP on downlinks is configured for Ethernet connection
- C. Storage array is connected directly to an HPE Synergy frame
- D. Ethernet connection is configured to boot from PXE
正解：D
質問 # 46
what is required to add a remote frame to the primary management ring?
- A. Request code from the primary HPE Composer
- B. UUD of the remote HPE Composer
- C. Serial number of one of the remote frames
- D. Remote frame Link Module IPv6 address
正解：B
質問 # 47
Which firmware activation method is only available for a logical interconnect?
- A. Parallel
- B. Orchestration
- C. Manual orchestration
- D. Force installation
正解：C
質問 # 48
Click option that will allow you to select a FlexNIC function for the specified connection.
正解：
解説：
質問 # 49
Which parameters can be defined in a server profile template for HPE Synergy Compute Modules? (Select two.)
- A. partition layout for servers running Linux.
- B. IL0 IPv4 or IPv6 address.
- C. network and storage connectivity.
- D. NIC teaming setup at OS level.
- E. local storage and BIOS settings.
正解：C、E
質問 # 50
Refer to the exhibit.
A customer complains that firmware compliance is empty. The customer confirmed that Synergy Service Pack is uploaded to the HPE OneView repository. How should you respond?
- A. The firmware repository is not defined within firmware compliance report.
- B. All of the components are up to date and compliant with firmware baseline.
- C. The firmware repository service must be restarted using maintenance connection.
- D. The refresh procedure must be performed on each logical enclosure to refresh firmware.
正解：C
質問 # 51
HOTSPOT
Click the option that will prevent the appliance from sending any email notifications or forwarding any SNMP traps that are related to the server hardware.
正解：
解説：
Explanation:
Graphical user interface, application
Description automatically generated
質問 # 52
Which operation can be performed using HPE OneView for VMware vCenter Server?
- A. Create a new VMware cluster within vCenter Server.
- B. Configure VMware cluster properties for HA and DRS.
- C. Deploy a new cluster node using OS Deployment Plan.
- D. Create a new distributed switch for cluster connectivity.
正解：C
質問 # 53
Which operation can be performed using HPE OneView for VMware vCenter Server?
- A. Create a new distributed switch for cluster connectivity
- B. Configure VMware cluster properties tor HA and DRS
- C. Remove a new node from an existing cluster
- D. Create a new VMware cluster within vCenter Server
正解：C
質問 # 54
You configured downlink aggregation for one of the HPE Synergy Compute Modules in an environment by placing two connections in the same Link Aggregation Group. After you made the changes to the server profile, its status changed to critical.
What can be done to fix this issue?
- A. The server profile for a given HPE Synergy compute module should be reapplied, then the Compute Module should be rebooted.
- B. Link Aggregation Group functionality should be enabled in advanced properties of the Logical Interconnect.
- C. The teaming or bonding driver in the server OS must be configured to enable the LACP and to form the LAG correctly.
- D. Ensure that the Link Aggregation Group time-out value matches the server set values.
正解：C
質問 # 55
Which statement about a server profile for an Apollo system is true?
- A. Enclosure Group Is automatically selected
- B. Virtual WWNs and MAC addresses can be defined
- C. UEFI optimized is the only available boot mode
- D. Fibre Channel connections can be defined
正解：D
質問 # 56
Your customer asks you if it is possible to perform HPE Synergy initial setup remotely. How should you respond?
- A. HPE Synergy cannot be deployed remotely, as Initial setup must be performed using a local console connection.
- B. Remote HPE Synergy Installation can be done only if an additional set of the services was purchased together with hardware platform.
- C. HPE Synergy can be configured remotely through a secure connection to the FLM if this option was enabled In the factory.
- D. Remote HPE Synergy setup is possible if HPE Composer 2 is used and a DHCP server Is available in the management network.
正解：C
解説：
HPE Synergy 4-port Frame Link Modules have SFP+ ports which enable connections to distant frames and remote subnets.
質問 # 57
Your customer plans to use HPE OneView to manage a small environment based on HPE ProLiant servers that includes G7 and Gen 10 systems. What should you explain to this customer?
- A. HPE ProLiant G7 and Gen10 cannot be managed using the same appliance.
- B. Not all of the features will be available for HPE ProLiant G7 systems.
- C. HPE Management Agent must he installed for for HPE ProLiant Gen 10 servers.
- D. HPE ProLiant Gen 10 servers do not need an HPE OneView license.
正解：D
質問 # 58
Your customer is considering HPE Synergy as a hardware platform for visualization workload. The customer environment is wry dynamic, and they often have to modify hypervisor networking.
Which resource provided by HPE should you discuss with this customer?
- A. HPE OneView Global Dashboard allows server profile replication and change management.
- B. HPE Image Streamer provides templates which can be updated to map the hypervisor requirements
- C. HPE OneView for VMware vCenter Server will enable host profile functionality and simplify changes.
- D. PowerShell Library for HPE OneView allows scripted environment modification.
正解：C
解説：
Reference: https://developer.hpe.com/blog/powershell-defined-infrastructure/
質問 # 59
Refer to the exhibit.
What does selecting the "Permanent" option mean?
- A. To remove data from the logical JBOD, the "erase on delete" option must be selected.
- B. Deleting the logical JBOD is possible only from the CLI with Administrator privileges.
- C. Any write operation to the logical JBOD will be immediately written, bypassing the cache.
- D. The logical JBOD will not be deleted, even when server profile is deleted.
正解：D
質問 # 60
Click the option that will allow you to update the firmware of master and satellite modules.
正解：
解説：
質問 # 61
What step must be taken to add an HPE SuperDome Flex to an existing OneView environment
- A. A Rack Management Controller must be added to HPE OneView.
- B. HPE Superdome Flex can be added to HPE OneView after at least one nPAR is created.
- C. HPE Superdome Flex complex can be added by adding base chassis of this complex.
- D. Each HPE Superdome Flex chassis must be added Individually using BMC IP.
正解：A
質問 # 62
You want to add the latest IL0 firmware to an HPE OneView firmware repository. How can you complete this task?
- A. An external repository must be created, because standalone components are supported only In an external repository.
- B. A PowerShell script must be used to upload IL0 firmware to the Internal or external firmware repository.
- C. ILO firmware can be marked as a hotnx and uploaded directly to the Internal or external firmware repository.
- D. A custom SPP iso Image must be created with the new IL0 firmware version and uploaded to the repository.
正解：A
質問 # 63
Your customer built a sever profile for HPE Synergy Gen 10 server and configured boot mode to Legacy BIOS. Which feature Is not available for this Compute Module?
- A. Boot from SAN
- B. BIOS management
- C. Workload profile
- D. Secure boot
正解：A
質問 # 64
Where is the association between an HPE OneView network and uplink port defined?
- A. Within an Enclosure Group definition
- B. At the network set level
- C. Within an HPE OneView network definition
- D. At the Logical Interconnect Group level
正解：D
質問 # 65
Which statement about the presented storage pools is true?
- A. All storage pools from the system named ThreePAR-1 can be used for volume provisioning
- B. Storage pools in discovered state can be removed from HPE OneView.
- C. HPE OneView can be used to configure replication only between managed storage pools
- D. All storage pools in managed state have a valid HPE OneView license applied
正解：A
質問 # 66
......
検証済みのHPE2-T37テスト問題集と解答で正確な98問題と解答あります：https://www.jpntest.com/shiken/HPE2-T37-mondaishu
最新をゲットせよ！HPE2-T37認定有効な試験問題集解答：https://drive.google.com/open?id=1wg0tlYEFeAWCxJcFkuazcRZfAnrePZW_