[2025年02月11日] 有効なHPE2-T37テスト解答HPE2-T37試験PDF問題を試そう
有効なHPE Product Certified - OneView [2022] HPE2-T37問題集はあなたの合格を必ず保証します
質問 # 14
Refer to the exhibit.
Your customer wants to define a Logical Interconnect Group (UG) and set the redundancy of the master modules to highly available, but this option is not available.
What is a possible reason?
- A. A dedicated license must be added to HPE OneView to enable this feature.
- B. Firmware on the master modules is too low to support highly available setup.
- C. Some master modules only support a redundant setup.
- D. There are not sufficient frames for highly available setup.
正解：C
質問 # 15
A customer has to deploy 21 HPE Synergy Compute Modules in a boot from SAN setup.
How this task can be simplified while keeping the profile consistent?
- A. Boot volumes can be created on demand and defined in the server profile template.
- B. An existing volume can be replicated automatically when creating a server profile.
- C. Boot volumes can be prepared in advance and later presented as shared volumes to the Compute Modules.
- D. single SAN volume can be created and utilized by all HPE Synergy Compute Modules.
正解：A
質問 # 16
DRAG DROP
For HPE Primera, match each task with the management tool that can be used to perform it.
正解：
解説：
Explanation:
Graphical user interface, application
Description automatically generated
質問 # 17
Which action is allowed on storage pools managed by HPE OneView?
- A. Setting storage pool replication
- B. Changing storage pool RAID level
- C. Volume provisioning
- D. Changing storage pool capacity
正解：C
質問 # 18
Your customer built a sever profile for HPE Synergy Gen 10 server and configured boot mode to Legacy BIOS. Which feature Is not available for this Compute Module?
- A. Secure boot
- B. Workload profile
- C. Boot from SAN
- D. BIOS management
正解：A
解説：
https://techlibrary.hpe.com/docs/iss/proliant_uefi/UEFI_TM_030617/s_configure_secure_boot.html
質問 # 19
You configured downlink aggregation for one of the HPE Synergy Compute Modules in an environment by placing two connections in the same Link Aggregation Group. After you made the changes to the server profile, its status changed to critical.
What can be done to fix this issue?
- A. The server profile for a given HPE Synergy compute module should be reapplied, then the Compute Module should be rebooted.
- B. Ensure that the Link Aggregation Group time-out value matches the server set values.
- C. The teaming or bonding driver in the server OS must be configured to enable the LACP and to form the LAG correctly.
- D. Link Aggregation Group functionality should be enabled in advanced properties of the Logical Interconnect.
正解：D
質問 # 20
Refer to the exhibit.
Your customer created multiple networks in HPE OneView, but only Eth-1 is available to be used within a server profile. What is a likely cause of this situation?
- A. The other networks are not added to the Logical Interconnect Group configuration.
- B. The other networks are not configured with the required Smart Link parameter.
- C. The other networks are configured with a purpose other than General or Management.
- D. The other networks have Private Network' selected, which hides them from Compute Modules.
正解：A
質問 # 21
Click the option that will prevent the appliance from sending any email notifications or forwarding any SNMP traps that are related to the server hardware.
正解：
解説：
質問 # 22
Your customer plans to manage an HPE BladeSystem enclosure with 16 blade servers and two HPE Virtual Connect modules installed. They also plan to use HPE OneView tomanage two HPE Primera arrays.
How many HPE OneView Advanced licenses will be required for this environment?
- A. 0
- B. 1
- C. 2
- D. 3
正解：C
質問 # 23
Your customer asks you if it is possible to perform HPE Synergy initial setup remotely. How should you respond?
- A. HPE Synergy cannot be deployed remotely, as Initial setup must be performed using a local console connection.
- B. Remote HPE Synergy setup is possible if HPE Composer 2 is used and a DHCP server Is available in the management network.
- C. Remote HPE Synergy Installation can be done only if an additional set of the services was purchased together with hardware platform.
- D. HPE Synergy can be configured remotely through a secure connection to the FLM if this option was enabled In the factory.
正解：B
解説：
https://techlibrary.hpe.com/docs/synergy/shared/setup_overview/index.html
質問 # 24
Which action is allowed on storage pools managed by HPE OneView?
- A. Setting storage pool replication
- B. Changing storage pool RAID level
- C. Changing storage pool capacity
- D. Volume provisioning
正解：C
質問 # 25
HOTSPOT
You want a server profile to be automatically applied when an HPE Synergy Compute Module is replaced.
Click the appropriate configuration option.
正解：
解説：
Affinity: Device bay + server hardware"
質問 # 26
Which licenses are optional to be purchased separately for HPE Synergy?
- A. HPE OneView licenses
- B. Global Dashboard licenses
- C. FC Upgrade licenses
- D. Virtual Connect licenses
正解：C
解説：
Licenses were not purchased in the original order for the modules and were ordered separately.
Reference: https://support.hpe.com/hpesc/public/docDisplay?docId=a00045233en_us&docLocale=en_ US
質問 # 27
Which operation can be performed using HPE OneView for VMware vCenter Server?
- A. Create a new distributed switch for cluster connectivity.
- B. Deploy a new cluster node using OS Deployment Plan.
- C. Configure VMware cluster properties for HA and DRS.
- D. Create a new VMware cluster within vCenter Server.
正解：B
質問 # 28
Click the option that must be configured for an HPE OneView when an HPE storage system is connected directly to an HPE Synergy frame.
正解：
解説：
質問 # 29
Match each type of HPE OneView network with its appropriate description.
正解：
解説：
質問 # 30
For which HPE OneView resource can manual orchestration method be used when updating the firmware?
- A. Frame Link Module
- B. Server profile
- C. Logical enclosure
- D. Logical interconnect
正解：B
質問 # 31
Refer to the exhibit.
Your customer wants to define a Logical Interconnect Group (UG) and set the redundancy of the master modules to highly available, but this option is not available. What is a possible reason?
- A. A dedicated license must be added to HPE OneView to enable this feature.
- B. Firmware on the master modules is too low to support highly available setup.
- C. Some master modules only support a redundant setup.
- D. There are not sufficient frames for highly available setup.
正解：C
質問 # 32
......
HPE2-T37試験は、HPE OneViewを使用するスキルを証明したいIT専門家を対象としています。HPE OneViewは、ユーザーがHPEインフラストラクチャを単一のインターフェースから展開、管理、監視できる管理プラットフォームです。この試験では、サーバー、ストレージ、ネットワーク管理を含むHPE OneViewの機能に関する知識をテストします。
HP HPE2-T37（HPE OneViewを使用して）認定を取得すると、HPE OneViewを使用してデータセンター管理タスクを簡素化および自動化し、コストを削減し、運用効率を向上させる際の候補者の知識とスキルが検証されます。この認定は、複雑なデータセンター環境でHPE OneViewを操作し、それを他のHPE製品と統合してビジネス目標を達成する候補者の能力も示しています。
HPE2-T37問題集でリアル試験問題でテストエンジン問題集でトレーニング：https://www.jpntest.com/shiken/HPE2-T37-mondaishu
HPE2-T37テスト問題集とオンライン試験エンジン：https://drive.google.com/open?id=1IVaUOEn7MD7gLfZ3WGw23nfTrFi_0WEw