無料HP HPE2-K45テスト練習問題試験問題集
試験準備には欠かさない！トップクラスのHP HPE2-K45試験最新版アプリ学習ガイドで練習
質問 16
Refer to exhibit:
You are using Restore Virtual Machine for a given virtual machine. Which result is achieved by thrs
operation?
- A. New virtual machine created out of this backup
- B. New linked-clone created
- C. Virtual machine boot partition mapped as IS image to another VM
- D. New snapshot added to existing virtual machine
正解: B
質問 17
What are the requirements for stretched cluster implementation?
- A. Arbiter located in the primary site
- B. A direct-connected network configuration
- C. The same subnet for the storage network for both locations
- D. Round trip latency below 50ms
正解: C
質問 18
A user deleted a file from Linux based virtual machine.
Which HPE SimpliVity data protection feature can be leveraged to recover the flie?
- A. Moving a virtual machine from DR site to the primary site
- B. Using file level restore option
- C. Reverting to the SimpliVity snapshot
- D. Restoring a virtual machine from the backup
正解: D
質問 19
A customer deleted a folder from a virtual machine running Windows. Click the backup option that you should
use to restore this folder.
正解:
解説:
質問 20
Which HPE SimpliVity model can be equipped with the HPE mniStack Accelerator card?
- A. HPE SimpliVity 2600
- B. HPE SimpliVity 380 Gen10 H
- C. HPE SimpliVity 325 Gen10
- D. HPE SimpliVity 380 Genl0
正解: D
質問 21
A customer plans to add HPE SimpliVity 380 Gen10 H SFF nodes to their remote site. The primary site is
running HPE SimpliVity 380 Gen10 hardware accelerated nodes. Which recommendation should be applied
for this design?
- A. Add new nodes to the existing cluster
- B. Configure the HPE SimpliVity 380 Gen 10 H SFF with a hardware accelerator card.
- C. Create a new cluster with SimpliVity 380 Gen10 H SFF nodes.
- D. Create a new cluster and split Doth types of nodes equally between both clusters,
正解: B
質問 22
What is the difference between crash consistent and application consistent cloning methods?
- A. Application-consistent clones allow the pending 10 operations to finish before committing them to the
database. - B. Application consistent method is available only for Linux operating systems.
- C. Both methods are the same; the only difference is speed of cloning.
- D. Crash consistent method should be used only for the virtual machines with Fault Tolerance enabled.
正解: D
質問 23
In an HPE SimpliVity 10-node cluster, a simultaneous increase of 10 requests across several VM caused a
surge in 10 traffic in a single node. Which HPE SimpliVity feature can evenly distribute the 10s across the
cluster?
- A. Resource Balancer
- B. Arbiter
- C. Management Virtual Appliance
- D. Intelligent Workload optimizer
正解: B
質問 24
What happens if an HPE mniStack Virtual Controller (VC) fails in a multi-node HPE SimpliVrty cluster?
- A. All VMs on the node go on standby mode to avoid data loss.
- B. All VMs on the node restart in a node where the replica resides.
- C. HPE SimpliVity Intelligent Workload ptimizer restores the VC from backups.
- D. The IP address of the VC fails over to another HPE SimpliVity node.
正解: B
質問 25
You want to use Lanamaric to collect Information from an existing customer environment to support the
solution design process. The customer informed you that the existing ESXi infrastructure is not connected to
the internet.
What can you do to collect the data using Lanamark?
- A. Ask the customer to install a Lanamark agent on each ESXi server, and deploy a log collector on the
workstation within the same network. - B. Download Lanamark Snap and use it to collect the data, and then upload manually to the Lanamark
portal. - C. Download performance data collected Dy the vCenter Server, and upload them to Lanamark.
- D. Using REST API, retrieve performance data from HPE neView and upload to Lanamark analyzer.
正解: A
質問 26
Which HPE SimpliVity Data Visualization Platform layer is responsible for storage and tracking of all data
and metadata?
- A. object Storage layer
- B. Data Management layer
- C. Persistent Storage layer
- D. Presentation layer
正解: C
質問 27
A customer is interested in HPE SimpliVity nodes that support NVIDIA Tesla T4 GPUs. Which models meet
the customer needs? (Select two.)
- A. HPE SimpliVity 2600
- B. HPE SimpliVity 380 Gen10 G
- C. HPE SimpliVity 380 Gen10
- D. HPE SimpliVity 325 Gen10
- E. HPE SimpliVity 380 Gen10 SFFH
正解: C,D
質問 28
A customer plans to use HPE SimpliVity RapidDR, but is concerned about vCenter Server license cost. In
which deployment scenario is only a single vCenter Server required?
- A. when less than 600 VMs is covered with a single recovery plan
- B. when Intelligent Workload ptimizer is disabled
- C. when federation is managed centrally
- D. when Enhanced Linked Mode is enabled for vCenter
正解: C
質問 29
You want to use the HPE SimpliVity move operation to move a virtual machine between clusters. What do
you have to do prior to completing the move operation?
- A. Install VS5 agent in the virtual machine.
- B. Suspend the virtual machine.
- C. Take a virtual machine snapshot.
- D. Shut down the virtual machine.
正解: A
質問 30
A customer wants to provide access to the HPE SimpliVity datastores for compute nodes running
CPU-intensive virtual machines. What should you tell the customer?
- A. Connecting ESXi compute nodes is possible only when VMFS datastores are configured at SimpliVity
Federation level - B. Additional license is required to connect ESXi nodes to SimpliVity datastores.
- C. It is supported to connect up to 5 compute nodes per SimpliVity node.
- D. Compute nodes must reside in the same cluster as HPE SimpliVity nodes.
正解: B
質問 31
A customer has some CPU intensive applications running that will be deployed in the virtual machines. The
customer is concerned that these virtual machines may impact the performance of the other virtual machines.
What should you recommend to avoid this potential problem and still leverage HPE SimpliVity features for
these virtual machines?
- A. Present HPE SimpliVrty datastores to external ESXi system that will house these CPU intensive virtual
machines. - B. Deploy CPU intensive virtual machines on HPE SimpliVity, and configure for them CPU affinity parameter.
- C. Add an external ESXi system to HPE SimpliVity cluster, and enable DRS functionality for CPU
intensive virtual machines. - D. Add an external ESXi cluster to HPE SimpliVity Federation, and enable Intelligent Workload ptimizer.
正解: D
質問 32
......
今すぐHPE2-K45問題を使おうHPE2-K45問題集PDF：https://www.jpntest.com/shiken/HPE2-K45-mondaishu
問題集練習試験問題学習ガイドはHPE2-K45試験にはこれ：https://drive.google.com/open?id=194TG0yfdlf6VNcscn_YM6A2O6lhTbGdQ