100%更新されたのはEMC D-VXR-DY-23限定版PDF問題集
有効な試験問題を試そうD-VXR-DY-23には無料サイトで限定お試しチャンス
質問 # 111
What is a consideration when using ToR switches with VxRail?
- A. VxRail iDRAC Management ports require 10 GbE ports.
- B. IPv6 Multicast must be disabled in this environment.
- C. All-Flash models must use 10 GbE or faster ports.
- D. Link aggregation must be enabled on VxRail switch ports.
正解：C
質問 # 112
What is the first step when preparing for a VxRail deployment using the VxRail configuration portal?
- A. Create the YAML file
- B. Initiate BOM using the Dell Support Portal
- C. Enter configuration information using a wizard
- D. Create the JSON file
正解：C
質問 # 113
Which functionality is provided by the VxRail Physical View for a node?
- A. Hardware alerts, BIOS and firmware versions, and initiating disk replacement
- B. Hardware alerts, LED indicator activation, and initiating power supply replacement
- C. LED indicator activation, initiating disk replacement, and BIOS parameter change
- D. BIOS and firmware versions, cluster shutdown, and initiating BIOS and firmware update
正解：A
質問 # 114
What environmental components of a 3-node VxRail cluster must be assigned IP addresses?
- A. ESXi Mgmt, vSAN, vMotion, and iDRAC
- B. vRealize Log Insight, vSAN, VxRail Manager, and Private Management Network
- C. ESXi Mgmt, vCenter, Witness Traffic Separation, and iDRAC
- D. vSAN, Witness Traffic Separation, vRealize Log Insight, and vMotion
正解：A
質問 # 115
What action is required to enable VxRail Manager the ability to update system software and browse VxRail KB articles?
- A. Set the appliance status to 'Installed' in the Dell EMC Install database
- B. Set the Username and Password for the Support Account
- C. Configure Proxy settings
- D. Enable Secure Remote Support (SRS)
正解：B
質問 # 116
What is the basis used for VMware vSAN licensing?
- A. TB capacity per cluster
- B. TB capacity per node
- C. Per disk group
- D. Per CPU socket
正解：D
質問 # 117
What is the correct order of steps to install a Dell PowerEdge-based VxRail cluster?
正解：
解説：
質問 # 118
Which setting can be changed post-deployment without risking VxRail system failure?
- A. VMware HCIA Distributed Switch Traffic Filtering and Marking may be enabled
- B. HA reserve capacity (for a 4 node cluster) may be reduced to 15%
- C. Distributed Resource Scheduler (DRS) automation level
- D. Enhanced vMotion Compatibility (EVC) may be disabled
正解：C
質問 # 119
You have just upgraded a VxRail Cluster from version 4.5.x to version 4.7.x. You need to ensure that new VxRail 4.7.x nodes will be discovered to enable Cluster expansion. The customer does not want to make any changes to the existing ToR switch infrastructure.
What action is necessary to ensure discovery of the new nodes?
- A. In vCenter, set the VLAN ID of the VxRail Management distributed portgroup to 3939
- B. In vCenter, create a new distributed portgroup Private Management Network with VLAN ID 3939
- C. Change the Private Management Network VLAN ID on each new node to match the management VLAN ID of the existing Cluster Restart loudmouth
- D. Change the Management Network VLAN ID on each new node to match the management VLAN ID of the existing Cluster Restart loudmouth
正解：C
質問 # 120
What is a supported witness configuration for a 3+3+1 VxRail Stretched Cluster?
- A. vSAN Witness appliance with customer provided license
- B. Physical ESXi host with multiple VxRail clusters as witness
- C. vSAN Witness appliance or a physical ESXi host
- D. Physical ESXi host with included cluster license
正解：C
質問 # 121
What network protocol is required for a VxRail Management VLAN?
- A. IPv6 Multicast
- B. IPv4 Unicast
- C. IPv6 Unicast
- D. IPv4 Multicast
正解：A
質問 # 122
How many cables are required to install a 4 node VxRail Model G410 cluster with 1 GbE into a rack?
- A. 4 CAT6 and 8 Twinax network cables
- B. 4 CAT6 and 32 SFP+ connectors, and 16 fiber cables
- C. 20 CAT6 network cables
- D. 4 CAT6 and 16 Twinax network cables
正解：C
質問 # 123
For which components in a VxRail environment can log files be created using vCenter vSphere Client when the VxRail Manager is unavailable?
- A. Server hardware, vCenter server, and vSphere UI client
- B. Server hardware, host operating system, and vSphere UI client
- C. Host operating system, vCenter server, and vSphere UI client
- D. Host operating system, vCenter server, and PT Agent
正解：C
質問 # 124
What is configured by default during the initial deployment of a VxRail cluster with All-Flash nodes?
- A. AID-1 vSAN storage policy
- B. vSAN Deduplication and compression
- C. vSAN Performance Service
- D. RAID-5 vSAN storage policy
正解：A
質問 # 125
According to the VxRail PEQ Engagement Details worksheet, links to what resources should the SE send to the customer?
- A. VxRail QuickStart Guide
VxRail Network Planning Guide - B. VxRail QuickStart Guide
Network Validation Tool - C. VxRail vCenter Server Planning Guide
VxRail Network Planning Guide - D. VxRail vCenter Server Planning Guide
Network Validation Tool
正解：B
質問 # 126
......
EMC D-VXR-DY-23公式認定ガイドPDF：https://www.jpntest.com/shiken/D-VXR-DY-23-mondaishu
無料Storage Administrator D-VXR-DY-23公式認定ガイドPDFダウンロード：https://drive.google.com/open?id=1_VEXjJk9Ym0VeTVWz8R3YMgdkZWzJuHl