[2021年12月] 今すぐダウンロード！リアルVMware 5V0-22.21試験問題集テストエンジン試験問題
最新5V0-22.21テスト問題集を試そう！最新VMware試験合格させます
質問 35
An administrator must choose between deploying a virtual witness or physical witness for a vSAN Stretched Cluster. The administrator eventually decides to use a virtual witness.
What is a benefit of selecting this approach?
- A. Increased vSAN datastore capacity
- B. Additional compute capacity for running VMs
- C. Shared metadata between separate clusters
- D. Reduced vSphere licensing
正解: D
質問 36
A vSAN administrator observes that the VMware Skyline Health: Time Synchronization displays one host that is noncompliant.
What is the meaning of this message?
- A. The vSAN administrator must put the noncompliant host into maintenance mode.
- B. The noncompliant host cannot communicate with vCenter.
- C. The vSAN administrator must review the NTP server configuration on vCenter Server and the ESXi hosts.
- D. The value of the CLOMRepairDelay parameter is incorrect.
正解: C
質問 37
A host in the cluster experiences a permanent NIC failure, and the replacement part will not arrive until the next morning. The administrator needs to ensure the availability of the production workload at all times.
Which step should be taken by the administrator to meet this goal?
- A. Enter Maintenance Mode with 'Full Data Migration'
- B. Disable the vSAN Service on the VMkernel port.
- C. Perform a live vMotion to another host.
- D. Shut down the production VMs.
正解: C
質問 38
In vSAN 7.0 U1, when a host enters into maintenance mode (EMM) using the "Ensure Accessibility" option, it will allow vSAN to write to another host in addition to the host holding the object replica.
What does vSAN write to that additional host?
- A. A full replica and all incremental updates that happened once the host entered maintenance mode
- B. The stripe from the host entering maintenance mode
- C. A full replica
- D. All incremental updates that happened once the host entered maintenance mode
正解: A
質問 39
A vSAN administrator notices the VMware Skyline Health: Network Latency Check reports indicate three hosts are non-compliant.
Which action should the vSAN administrator take?
- A. Reboot the noncompliant hosts one at a time.
- B. Place the noncompliant hosts into an isolated network.
- C. Check VMKNICs, uplinks. VLANs. physical switches, and associated settings.
- D. Rerun the VMware Skyline Health: vSAN Cluster Partition report.
正解: D
質問 40
A vSAN administrator has three available racks and six vSAN hosts and needs to protect against a rack failure while maximizing resources.
Which two strategies should the vSAN administrator use to achieve this goal? (Choose two.)
- A. 2-node configuration
- B. Specify fault domains
- C. RAID-5/FTT=1
- D. vSAN stretched cluster
- E. RAID-6/FTT=2
正解: B,E
質問 41
A vSphere administrator wants to use vSphere Lifecycle Manager (vLCM) to manage a vSAN cluster with one desired image. When creating the new cluster, the administrator chooses "Manage all hosts in the cluster with a single image".
Which option is NOT available when setting up the cluster image?
- A. Import image from new host
- B. Import baseline from vSphere Lifecycle Manager
- C. Compose a new image
- D. Import image from an existing host in the vCenter inventory
正解: C
質問 42
A vSAN administrator wants to install a patch on an existing vSAN cluster. The environment runs vSphere 7.0, and the patch contains ESXi 7.0 Update 1c. The vSAN administrator will use vSphere Lifecycle Manager images to add the patch to the proper image and apply it to the vSAN cluster.
Which action should be performed before patching the ESXi hosts in the vSAN cluster?
- A. Perform a disk format upgrade.
- B. Create a baseline instead of using images.
- C. Upgrade the Platform Services Controller.
- D. Upgrade the vCenter Server.
正解: D
質問 43
Which solution can automate the deployment of a vSAN cluster as part of a full Software-Defined Datacenter?
- A. VMware Cloud Director
- B. VMware Cloud Foundation
- C. vRealize Suite Lifecycle Manager
- D. vSphere Replication
正解: B
質問 44
Which Storage Policy Structure Rule is supported by vSAN Direct Datastore?
- A. Enable host-based rules
- B. Enable tag/capacity-based placement rules
- C. Enable storage performance-based rules
- D. Enable rules for vSAN storage
正解: D
質問 45
A site administrator has determined that the site needs to upgrade all vSAN clusters to 7.0 U1. The vSAN administrator wishes to complete the update in the shortest amount of time possible. All virtual machines are assigned a storage policy where the "Failures to tolerate" is set to one or higher.
Which strategy should be used to achieve this goal?
- A. Update only select, mission-critical clusters.
- B. Perform a complete update, omitting the on-disk format update.
- C. Select the *No data migration" maintenance mode option.
- D. Disable de-duplication and compression prior to the upgrade.
正解: A
質問 46
All of the virtual machines running on a hybrid vSAN datastore have this storage policy assigned:
Failures to Tolerate (FTT) rule is set to "2 Failures - RAID-1 (Mirroring)".
The vSAN administrator needs to reduce the amount of vSAN datastore capacity the virtual machines will consume.
Which action should the vSAN administrator take to meet this goal?
- A. Add the "Flash read cache reservation" rule to the storage policy, and set to 0%.
- B. Disable Operations reserve and Host rebuild reserve and click "Apply".
- C. Change the FTT rule to "1 Failure - RAID-1 (Mirroring)", and select "Now" for Reapply to VMs.
- D. Modify the FTT rule to "2 Failures - RAID-5 (Erasure Coding)".
正解: C
質問 47
An administrator has discovered that space utilized by VMs does not decrease after deleting files and folders within the VMs. The administrator needs to be able to reclaim this space.
Which action could the administrator take to accomplish this task?
- A. Set the Object Space Reservation rule to 100%.
- B. Disable Storage I/O Control for the vSAN cluster.
- C. Reboot the VM to recreate the swap file.
- D. Enable TRIM/UN MAP for the vSAN cluster.
正解: D
質問 48
Which option, if any, is the default option to enable Maintenance Mode on a vSAN host?
- A. Full data migration.
- B. Ensure accessibility.
- C. No data migration.
- D. There is no default option. The administrator must select an option.
正解: D
質問 49
A vSAN administrator was presented with 30 additional vSAN ReadyNodes to add to an existing vSAN cluster. There is only one administrator to complete this task.
What is the fastest approach?
- A. Use a Host Profile that was extracted from an existing host.
- B. Clone the ESXi boot partition to all new hosts, since the hardware is identical.
- C. Run vim-cmd to capture, and apply the configuration from an existing host.
- D. Launch Quickstart to Add Hosts to a vSAN Cluster
正解: D
質問 50
A vSAN administrator has been tasked with troubleshooting an application in a Hybrid vSAN environment. The application is I/O intensive, and the magnetic capacity devices may be playing a role in slow performance, so the administrator decides to take action to help resolve the problem.
Which action should the administrator take?
- A. Modify the stripe width for the application on the advanced settings for the VM.
- B. Add more magnetic capacity devices in the affected host.
- C. Change the Default Storage Policy to have stripe width of 13.
- D. Increase the stripe width based on the number of capacity devices within the disk group.
正解: A
質問 51
A vSAN administrator received the following alert from vRealize Operations Manager:
"VMKernel NIC is experiencing high number of dropped packets."
What is the quickest path in vRealize Operations Manager that should be used to further investigate this alert?
- A. Home -> vSphere Optimization Assessment
- B. Home -> Troubleshoot -> vSAN
- C. Alerts -> Triggered Alerts
- D. Environment -> vSAN and Storage Devices
正解: C
質問 52
The DevOps team of an organization wants to deploy their new cloud native application with persistent storage on a dedicated vSAN cluster. The storage administrator is tasked to configure the vSAN cluster and leverage the vSAN Direct feature.
Which two requirements must the administrator meet to complete this task? (Choose two.)
- A. An integration with vSAN File Services
- B. A dedicated network for vSAN Direct
- C. vSphere HA enabled on the vSAN cluster
- D. A valid vSAN license for the vSAN cluster
- E. Unclaimed disks in the hosts for vSAN Direct
正解: B,C
質問 53
A newly deployed vSAN cluster runs vSAN 7.0, and the vSAN cluster needs an integration with a third-party software solution. The software solution provides full app-level redundancy, and it runs on the vSAN Data Persistence platform.
The administrator configures vSAN Direct Configuration to integrate the third-party storage with vSAN and now needs to configure a storage policy to make sure the vSAN Direct storage is used by the vSAN Data Persistence platform third-party software solution.
Which type of storage policy configuration should the administrator use?
- A. A storage policy with capability-based rules for third-party storage
- B. A vSAN shared nothing policy with no data redundancy (FTT=0)
- C. A storage policy with tag or capability-based rules for vSAN Direct
- D. AvSAN storage policy with one failure to tolerate (N 1=1)
正解: C
質問 54
After a recent security assessment, the security team recommended that vSAN encryption be enabled. The vSAN administrator will be adding a Key Management Server to vCenter.
What is a prerequisite to taking this action?
- A. Self-encryption drives
- B. Proxy server with username and password access
- C. IPv6 addressing
- D. Cryptographer ManageKeyServer permissions
正解: D
質問 55
......
VMware 5V0-22.21 認定試験の出題範囲：
| トピック | 出題範囲 |
|---|---|
| トピック 1 |
|
| トピック 2 |
|
| トピック 3 |
|
| トピック 4 |
|
| トピック 5 |
|
| トピック 6 |
|
あなたを必ず合格させる5V0-22.21問題集PDF2021年最新のに更新された77問あります：https://www.jpntest.com/shiken/5V0-22.21-mondaishu